Претраживање
Приказ резултата 1-10 од 14
Structure study of nanosized La- and Sb-doped BaTiO3
(Elsevier Science Sa, Lausanne, 2010)
Lanthanum and antimony doped barium titanate powders were prepared by polymeric precursors method through Pechini process. Obtained powder was pressed into pellet and sintering was performed at 1300 degrees C for 8 h. The ...
Electrodeposition of Zn-Mn alloys at high current densities from chloride electrolyte
(Springer, New York, 2013)
The Zn-Mn alloy electrodeposition on a steel electrode in chloride electrolyte was investigated with the aim of obtaining deposits with as high as possible Mn percent. It was found that the deposition current density and ...
Sintering and electrical properties of Ce1-xBixO2-delta solid solution
(Elsevier Science Sa, Lausanne, 2014)
Solid solution Ce1-xBixO2-delta nanopowders with the composition of x = 0.1-0.5 were synthesized by using Self Propagating Room Temperature procedure (SPRT). The results obtained by XRPD show that synthesized samples were ...
Physical-mechanical and microstructural properties of alkali-activated fly ash-blast furnace slag blends
(Elsevier Sci Ltd, Oxford, 2015)
This paper investigated physical mechanical and microstructural properties of alkali-activated binders based on blends of fly ash (FA) and blast furnace slag (BFS). FA BFS blends were alkali-activated with sodium silicate ...
Mechanochemical synthesis of yttrium manganite
(Elsevier Science Sa, Lausanne, 2013)
Yttrium manganite (YMnO3) is a multiferroic material, which means that it exhibits both ferromagnetic and ferroelectric properties, so making it interesting for a variety of technological applications. In this work, ...
Dielectric and relaxor behavior of BaBi4Ti4O15 ceramics
(Elsevier Science Sa, Lausanne, 2010)
Barium bismuth titanate BaBi4Ti4O15 (BBiT) ceramics have been prepared using non-conventional solid-state reaction route based on mechanochemical synthesis during intensive milling. The X-ray diffraction method was used ...
Correlation between microstructure and electrical properties of ferroelectric relaxors
(Wiley, 2016)
Relaxor ferroelectrics or relaxors are a class of disordered crystals possessing a peculiar structure and properties. Relaxor ferroelectrics are found in many applications in electronics such as multilayer ceramic capacitors, ...
Electrical properties of lanthanum doped barium titanate ceramics
(Elsevier Science Inc, New York, 2011)
Pure and lanthanum doped barium titanate (BT) ceramics were prepared by sintering pellets at 1300 degrees C for 8 h, obtained from nanopowders synthesized by the polymeric precursor method. XRD results showed formation of ...
Optimization of electrolytic process of formation of open and porous copper electrodes by the pulsating current (PC) regime
(Elsevier Science Sa, Lausanne, 2011)
Optimization of process of formation of open and porous copper electrodes, denoted as the honeycomb-like ones, by the regime of pulsating current (PC) is considered. The square-waves PC were consisted of the same amplitude ...
Effect of preparation route on the microstructure and electrical conductivity of co-doped ceria
(Elsevier Sci Ltd, Oxford, 2013)
Dense Ce0.8Sm0.1Gd0.1O2-delta electrolytes were fabricated by sintering of CeO2 solid solutions which were prepared from metal nitrates and NaOH using self propagating room temperature synthesis (SPRT). Three different ...