Претраживање
Приказ резултата 651-660 од 661
Spark plasma sintering of hydrothermally synthesized bismuth ferrite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2016)
Bismuth ferrite, BiFeO3 (BFO), powder was synthesized by hydrothermal method from Bi(NO3)(3)center dot 5H(2)O and Fe(NO3)(3)center dot 9H(2)O as precursors. The synthesized powder was further sintered using spark plasma ...
Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2008)
In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in ...
Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2013)
Nanostructured single layered (pure TiO2, pure alpha-Fe2O3 and mixed Fe2O3/TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen ...
Synthesis of thin films by the pyrosol process [Sinteza prevlaka pirolizom]
(Savez hemijskih inženjera, Beograd, 2002)
Among many aerosol routes, the Pyrosol process, due to its simplicity, low cost and quality of obtained films, represents a promising technique for the synthesis of thin films. The pyrosol process is based on the transport ...
Mechanochemical synthesis of bismuth ferrite
(Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd, 2013)
A powder mixture of Bi2O3 and Fe2O3 was mechanically treated in a planetary ball mill in an air from 30 to 720 minutes. It was shown that the mechanochemical formation of BiFeO3 (BFO) phase was initiated after 60 min and ...
Effect of Binder Molecular Weight on Morphology of TiO2 Films Prepared by Tape Casting and Their Photovoltaic Performance
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2012)
Titanium(IV) oxide in the form of anatase has proven to be the best choice for photoanodic material in dye-sensitized solar cells (DSCs). The aim of the work was to study the influence of binder molecular weight on the ...
Analysis of isothermal sintering of zinc-titanate doped with MgO
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2007)
The aim of this work was analysis of isothermal sintering of zinc titanate ceramics doped with MgO obtained by mechanical activation. Mixtures of ZnO, TiO2 and MgO (0, 1.25 and 2.5%) were mechanically activated 15 minutes ...
Temporal analysis of electroretinographic responses in fishes with rod-dominated and mixed rod-cone retina
(General Physiol And Biophysics, Bratislava, 2009)
Photoreceptor content of fish retinas could be accessed by comparative electroretinographic (ERG) studies using flickering light stimuli that could separate rod-mediated vision where critical flicker frequency (CFE, frequency ...
Fluctuating vs. Continuous Exposure to H2O2: The Effects on Mitochondrial Membrane Potential, Intracellular Calcium, and NF-kappa B in Astroglia
(Public Library Science, San Francisco, 2013)
The effects of H2O2 are widely studied in cell cultures and other in vitro systems. However, such investigations are performed with the assumption that H2O2 concentration is constant, which may not properly reflect in vivo ...
The effects of wild-type and mutant sod1 on smooth muscle contraction
(Srpsko biološko društvo, Beograd, i dr., 2015)
In this work we compared the mutated liver copper zinc-containing superoxide dismutase (SOD1) protein G93A of the transgenic rat model of familial amyotrophic lateral sclerosis (FALS), to wild-type (WT) rat SOD1. We examined ...