Search
Now showing items 11-20 of 30
Optimization of process of the honeycomb-like structure formation by the regime of reversing current (RC) in the second range
(Springer, New York, 2020)
Formation of the honeycomb-like electrodes of copper by the regime of reversing current (RC) in the second range has been investigated. Morphological and structural characteristics of this electrode type obtained by various ...
Electrodeposition of Zn-Mn alloys at high current densities from chloride electrolyte
(Springer, New York, 2013)
The Zn-Mn alloy electrodeposition on a steel electrode in chloride electrolyte was investigated with the aim of obtaining deposits with as high as possible Mn percent. It was found that the deposition current density and ...
Ni-moo2 cathodes for hydrogen evolution in alkaline solutions. Effect of the conditions of their electrodeposition
(International Association of Physical Chemists, 2013)
The electrodeposition of Ni-MoO2 composite coatings is a specific process taking place under defined hydrodynamic conditions. In this work the influence of hydrodynamics, current density, and MoO2 concentration on the ...
Service life test of the NiSn coatings as cathodes for hydrogen evolution in industrial chlor-alkali electrolysis
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
In this work the "service life test" (SLT) of the NiSn alloy coatings as cathodes for the hydrogen evolution reaction (HER), deposited onto Ni 40 mesh at different current densities from the bath containing 0.1 mol dm(-3) ...
Formation of the honeycomb-like electrodes by the regime of pulsating overpotential in the second range
(International Association of Physical Chemists, 2012)
In this study the honeycomb-like copper structures electrodeposited by the regime of pulsating overpotential in the second range were analyzed by the technique of scanning electron microscopy. The overpotential amplitude ...
Influence of the complex formation on the morphology of lead powder particles produced by the electrodeposition processes
(Elsevier Science Bv, Amsterdam, 2013)
The processes of lead electrodeposition from the basic (nitrate) and complex (acetate) electrolytes were mutually compared by the analysis of their polarization characteristics and by the scanning electron microscopic (SEM) ...
Ultra-thin layers of iridium electrodeposited on Ti2AlC support as cost effective catalysts for hydrogen production by water electrolysis
(Elsevier Science Sa, Lausanne, 2020)
The hydrogen evolution reaction (HER) was investigated in 0.5 M H2SO4 at thin iridium layers electrodeposited on Ti2AlC substrate. Five samples, varying in thickness from 4.5 nm to 255 nm, were electrodeposited from the ...
Accelerated service life test of electrodeposited NiSn alloys as bifunctional catalysts for alkaline water electrolysis under industrial operating conditions
(Elsevier Science Sa, Lausanne, 2018)
Electrodeposited NiSn alloy coatings onto Ni 40 mesh substrate were tested for application as cathodes and anodes in the cell for alkaline water electrolysis in 30 wt% KOH at 80 degrees C. The "accelerated service life ...
Morphology and internal structure of copper deposits electrodeposited by the pulsating current regime in the hydrogen co-deposition range
(Springer, New York, 2012)
The effect of the regime of pulsating current (PC) on copper electrodeposition in the hydrogen co-deposition range was examined by the techniques of scanning electron and optical microscopes. The quantities of evolved ...
Application of pulsating overpotential regime on the formation of copper deposits in the range of hydrogen co-deposition
(Springer, New York, 2010)
Electrodeposition of copper by pulsating overpotential (PO) regime in the range of hydrogen co-deposition was examined by scanning electron microscopy. It was found that the increase of the pause-to-pulse ratio produced a ...