Претраживање
Приказ резултата 1-5 од 5
Investigation of Dielectric Properties of Printed Material for Capacitor Application
(IEEE Computer Society, 2020)
This paper investigates the dielectric characteristics of the material used to make capacitor in fused filament fabrication technology. The characteristics of the capacitor made of PLA (Polylactic Acid) as dielectric are ...
Design and Modelling of 3D Printed Capacitive Displacement Sensor
(IEEE Computer Society, 2021)
The aim of the work is the realization and modelling of a simple capacitive displacement sensor with the use of 3D printing technology and polylactic acid (PLA) material. The sensor consists of three 3D printed PLA parts: ...
Impedance Response of Pseudobrookite Thick Films with a Sandwich Configuration
(IEEE Computer Society, 2017)
We have investigated the impedance response of pseudobrookite thick films screen printed on alumina substrate in the temperature interval from room temperature to 350 degrees C in the frequency range 100 Hz - 1 MHz. Two ...
Application of Nanocrystalline Pseudobrookite (Fe2TiO5) Thick Films for Humidity Sensing
(IEEE Computer Society, 2018)
Pseudobrookite nanocrystalline thick films were screen printed on alumina substrate with small interdigitated PdAg electrodes (width 6 mm, length 12 mm, electrode spacing 0.2 mm) and fired at 600 degrees C for 30 minutes. ...
Analysis of electronic properties of pseudobrookite thick films with possible application for NO gas sensing
(IEEE Computer Society, 2016)
Two pseudobrookite (PSB) containing pastes were composed of a mixture of starting nanopowders of hematite (alpha-Fe2O3) and anatase (TiO2) in the molar ratios 1: 1 (referred to as PSB-1) and 1:1.5 (referred to as PSB-1.5), ...