Search
Now showing items 1-10 of 27
Anode Supported Protonic Solid Oxide Fuel Cells Fabricated Using Electrophoretic Deposition
(Wiley-V C H Verlag Gmbh, Weinheim, 2011)
Intermediate temperature solid oxide fuel cells (IT-SOFCs) were fabricated depositing proton conducting BaCe0.9Y0.1O3-x (BCY10) thick films on cermet substrates made of nickel oxide-yttrium doped barium cerate (NiO-BCY10) ...
Engineering carbon chains from mechanically stretched graphene-based materials
(Amer Physical Soc, College Pk, 2011)
The electrical response of graphene-based materials can be tailored under mechanical stress. We report different switching behaviors that take place in mechanically deformed graphene nanoribbons prior to the breakage of ...
Non-noble metal composite cathodes for hydrogen evolution. Part I: The Ni-MoOx coatings electrodeposited from Watt's type bath containing MoO3 powder particles
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
In this work the Ni-MoOx coatings have been prepared and characterized in view of their possible application as electrocatalysts for hydrogen evolution reaction (HER) in alkaline solution. The procedure of deposition of ...
Non-noble metal composite cathodes for hydrogen evolution. Part II: The Ni-MoO2 coatings electrodeposited from nickel chloride-ammonium chloride bath containing MoO2 powder particles
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
In this work the procedure of the deposition of composite Ni-MoO2 coatings onto Ni mesh from the nickel chloride-ammonium chloride electrolyte containing suspended MoO2 powder particles, under simulated industrial deposition ...
Phase identification in electrodeposited Ag-Cd alloys by anodic linear sweep voltammetry and X-ray diffraction techniques
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
During electrodeposition of Ag-Cd alloy coatings phenomena of self-organization and formation of spatio-temporal structures can be observed. The difficulties in the determination of the local phase composition in the ...
Microstructural and electrical changes in nickel manganite powder induced by mechanical activation
(Pergamon-Elsevier Science Ltd, Oxford, 2011)
Nickel manganite powder synthesized by calcination of a stoichiometric mixture of manganese and nickel oxide was additionally mechanically activated in a high energy planetary ball mill for 5-60 min in order to obtain a ...
Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis
(Springer, Dordrecht, 2011)
We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the ...
Optimization of electrolytic process of formation of open and porous copper electrodes by the pulsating current (PC) regime
(Elsevier Science Sa, Lausanne, 2011)
Optimization of process of formation of open and porous copper electrodes, denoted as the honeycomb-like ones, by the regime of pulsating current (PC) is considered. The square-waves PC were consisted of the same amplitude ...
Defect induced variation in vibrational and optoelectronic properties of nanocrystalline ZnO powders
(Amer Inst Physics, Melville, 2011)
Structural disorder of ZnO nanopowders with mean crystallite size down to 15 nm, produced by mechanical activation in high energy mills, has been analyzed by x-ray diffraction and Raman spectroscopy. The influence of such ...
Structural characterization of self-assembled ZnO nanoparticles obtained by the sol-gel method from Zn(CH3COO)(2)center dot 2H(2)O
(IOP Publishing Ltd, Bristol, 2011)
Zinc oxide nanopowders were synthesized by the sol-gel method from an ethanol solution of zinc acetate dihydrate. Detailed structural and microstructural investigations were carried out using x-ray diffraction, Raman ...