Search
Now showing items 1-10 of 88
Contents of phenolics and carotenoids in tomato grown under polytunnels with different UV-transmission rates
(Tubitak Scientific & Technical Research Council Turkey, Ankara, 2017)
Tomato (Solanum lycopersicum L.) is among the economically most important vegetables in Europe, valued for its bioactive properties due to significant contents of vitamins, carotenoids, and phenolic compounds. In this ...
Designing topological defects in 2D materials using scanning probe microscopy and a self-healing mechanism: a density functional-based molecular dynamics study
(IOP Publishing Ltd, Bristol, 2017)
Engineering of materials at the atomic level is one of the most important aims of nanotechnology. The unprecedented ability of scanning probe microscopy to address individual atoms opened up the possibilities for ...
Two Step Sintering of ZnTiO3 nanopowder
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Metastable nanopowder ZnTiO3 was pressed into cylindrical compacts at 200 MPa. Compacts were treated by conventional heating with isothermal holding at 931 degrees C for 10 minutes, 25 minutes and 40 minutes. ZnTiO3 compacts ...
Stomata characteristics of two paulownia species under different conditions of light
(Parlar Scientific Publications (P S P), Freising, 2017)
The paper shows results of research of different light intensity impact on stomata number (stomata density-SD) and stomata area (stomata pore surface-SPS). There were analysed two Paulownia species Paulownia elongata and ...
Structural and electronic properties of screen-printed Fe2O3/TiO2 thick films and their photoelectrochemical behavior
(Springer, New York, 2017)
Nanostructured Fe2TiO5 thick films were deposited on fluorine-doped tin oxide glass substrate using screen printing technology. Starting hematite and anatase nanopowders were mixed in molar ratios 1:1 and 1:1.5 and calcined ...
Characterisation of Mn0.63Zn0.37Fe2O4 Powders After Intensive Milling and Subsequent Thermal Treatment
(Međunarodni Institut za nauku o sinterovanju, Beograd, 2017)
Commercial Mn-Zn powder (Mn0.63Zn0.37Fe2O4, 93 wt. % and Fe2O3 7 wt. %) was milled 0.5, 1, 2 and 4 hours in a planetary ball mill. The goal was to observe intensive milling influences on oxidation and reduction processes ...
Dielectric properties, complex impedance and electrical conductivity of Fe2TiO5 nanopowder compacts and bulk samples at elevated temperatures
(Springer, Dordrecht, 2017)
In this work we have investigated changes in dielectric properties, electrical conductivity and complex impedance of Fe2TiO5 nanopowder compacts and bulk samples as a function of elevated temperature (room to 423 K compacts, ...
Mitochondrial activity detected by cantilever based sensor
(Copernicus Gesellschaft Mbh, Gottingen, 2017)
Our team recently demonstrated that cantilever based devices can detect signature of life in a chemistry independent manner. In this technique, the organism of interest is attached onto a classical AFM cantilever. If alive, ...
Latewood proportion inside growth rings by bald cypress stems in Serbia
(Parlar Scientific Publications (P S P), Freising, 2017)
In the paper, there was analyzed participation of the latewood zone inside growth rings of bald cypress from two different locations in Serbia. Its proportion has been monitored depending on three factors growth rings ...
Biomonitoring of Urban Pollution Using Silicon-Accumulating Species, Phyllostachys aureosulcata 'Aureocaulis'
(Springer, New York, 2017)
We investigated metal accumulation in bamboo leaves during three seasons at three urban locations differing in pollution levels. The higher content of Cu, Pb, and Zn in the leaves was in correlation with the highest ...