Претраживање
Приказ резултата 1-10 од 63
Design of RFID antenna in ink-jet printing technology
(IEEE, 2012)
In this paper design of 125 kHz RFID antenna is presented. The optimization and improvement of electrical characteristics, including inductance and Q-factor, is also discussed. Designed RFID antenna is part of the ID card, ...
MRI brain tumors images by using independent component analysis
(SISY 2011 - 9th International Symposium on Intelligent Systems and Informatics, Proceedings, 2011)
The magnetic properties of nuclei have significant applications in medical imaging. These applications are possible because the relaxation properties and the resonance frequency for a nucleus depend upon its environment. ...
Parallel analysis of axial pressing, casting and PIM as routes for production of alnico8
(European Powder Metallurgy Association (EPMA), 2010)
Samples of Alnico8 were prepared from the same starting powder by pressing, casting and powder injection moulding (PIM), respectively, and characterized by SEM and thermal analysis-DTA/TGA. Optimization of the sintering ...
A Characterization of Ceramic SMD Inductors for PCB Applications
(IEEE, New York, 2009)
In this paper, a measurement technique, characterization and parameters extraction of SMD inductors for PCB applications are presented. These components, manufactured by Fair-Rite, are measured and characterized using a ...
Fuzzy logic point of view applied to diseases caused by dynamic mutations
(12th IEEE International Symposium on Computational Intelligence and Informatics, CINTI 2011 - Procee, 2011)
For the first time, this paper tries to explain the origins of diseases caused by unstable DNA repeats, known as dynamic mutations. It is common to find fairly simplified correlation between the number of DNA repeats and ...
Sintered strontium hexaferrite shaped by injection moulding in unidirectional magnetic and electromagnetic field
(European Powder Metallurgy Association (EPMA), 2010)
Strontium hexaferrite permanent magnets were produced by powder injection molding (PIM). The feedstock for powder injection molding was prepared by mixing strontium hexaferrite powder with a "Solvent system" organic binder. ...
Characterization of ferrite surface mount bead using S-parameters
(SIISY 2010 - 8th IEEE International Symposium on Intelligent Systems and Informatics, 2010)
In this paper, characterization of ferrite surface mount bead based on S-parameters measurement, using vector network analyzer E5071B and specially developed PCB test fixture, are presented. The validation of characterization ...
Structural organisation of the wood polymers in the wood fibre structure
(China Light Industry Press, Beijing, 2011)
The organisation of the major polymers in the wood fibre structure has a large impact on the properties of the structure. Numerous studies have been devoted to the cellulose microfibril arrangement, the structure providing ...
Chipless wireless sensor node
(MIPRO 2012 - 35th International Convention on Information and Communication Technology, Electronics, 2012)
A wireless sensor node based on a chipless RFID tag with integrated sensor element is presented. The chipless tag is multiresonator-based and encodes data as spectral signature. The sensor element is attached to a dedicated ...
Characterization of the structure and magnetic properties of Fe49Co2V made by the powder metal injection molding route
(Advances in Powder Metallurgy and Particulate Materials - 2010, Proceedings of the 2010 Internationa, 2010)
The semi-hard magnetic alloy Fe49Co2V is widely used in electronics and automation. Many of these parts are complex ones which can be produced with significant advantages by the PIM technology. In this work the feedstock ...