Претраживање
Приказ резултата 21-30 од 36
Hydrothermally assisted synthesis of YMnO3
(Elsevier Sci Ltd, Oxford, 2015)
In this work single phase hexagonal YMnO3 powders were prepared starting from Y(CH3COO)(3)center dot xH(2)O, Mn(CH3COO)(2)center dot 4H(2)O, KMnO4 and KOH using methods of conventional (280 degrees C for 6 h) or microwave ...
Donor-acceptor joint effect in barium titanate systems
(Elsevier Sci Ltd, Oxford, 2015)
Modified Pechini process was used to prepare nanopowders of barium titanate (BT) co-doped with different concentrations of niobium and manganese. Influence of dopants on the grain growth inhibition and microstructure ...
Nanostructured Fe2O3/TiO2 thick films: Analysis of structural and electronic properties
(Elsevier Sci Ltd, Oxford, 2015)
Thick films using starting nanopowders of TiO2 (anatase 99.7%) and alpha-Fe2O3 (hematite) mixed in the weight ratios 60:40 and 40:60 for thick film paste were fabricated by screen printing technology on an alumina substrate. ...
Antimony doping effect on barium titanate structure and electrical properties
(Elsevier Sci Ltd, Oxford, 2011)
Nanopowders of pure and antimony doped barium titanate (BaTiO3-BT) were synthesized by polymeric precursors method based on Pechini process. Obtained powders were pressed and sintered at 1300 degrees C for 8 h. XRD analysis ...
Multiferroic (NiZn) Fe2O4-BaTiO3 composites prepared from nanopowders by auto-combustion method
(Elsevier Sci Ltd, Oxford, 2015)
Nickel zinc ferrite (NZF) and barium titanate (BT) were prepared by auto-combustion synthesis as an effective, simple and rapid method. Multiferroic composites with the general formula yNi(1-x)Zn(x)Fe(2)O(4)-(1-y)BT (x=0.3, ...
Structural and electrical properties of sintered Fe2O3/TiO2 nanopowder mixtures
(Elsevier Sci Ltd, Oxford, 2014)
Starting nanopowders of TiO2 (anatase 99.7%) and alpha-Fe2O3 (hematite) were mixed in the weight ratios 60:40 and 40:60. Green samples were sintered in the temperature range 750-1250 degrees C in air. Structural, morphological ...
Properties of lanthanum doped BaTiO3 produced from nanopowders
(Elsevier Sci Ltd, Oxford, 2010)
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic ...
Far infrared and micro structural studies of mechanically activated nickel manganite
(Elsevier Sci Ltd, Oxford, 2013)
Nickel manganite powder synthesized by calcination of a stoichiometric mixture of manganese (MnO Aldrich 99.9%) and nickel oxide (NiO Merck, 99.5%) containing 0.5 wt% CoO and Fe2O3, was additionally mechanically activated ...
Effect of La substitution on the structural and electrical properties of BaBi4-xLaxTi4O15
(Elsevier Sci Ltd, Oxford, 2013)
Pure and lanthanum doped barium bismuth titanate BaBi4-xLaxTi4O15 (BBLT, x=0, 0.05, 0.15, 0.30) ceramics were prepared utilizing solid state method. The X-ray diffraction (XRD) data confirmed formation of single-phase ...
Synthesis and characterization of tungsten carbide fine powders
(Elsevier Sci Ltd, Oxford, 2015)
Fine tungsten carbide (WC) powder was prepared by solid state reaction between tungsten powder (W) and activated carbon cloth as a new carbon (C) source. The effect of temperature and time of heat treatment as well as the ...