In this work single phase hexagonal YMnO3 powders were prepared starting from Y(CH3COO)(3)center dot xH(2)O, Mn(CH3COO)(2)center dot 4H(2)O, KMnO4 and KOH using methods of conventional (280 degrees C for 6 h) or microwave assisted hydrothermal synthesis (200 degrees C for 2 h) followed by calcination at 1200 degrees C for 2 h. According to FESEM analysis the calcined powders consisted of submicronic YMnO3 particles, which were uniform in shape and size. Ceramic samples were obtained by sintering the as-synthesized powders at 1400 degrees C for 2 h. XRD analysis confirmed the presence of the single phase hexagonal YMnO3. SEM analysis showed a dense and homogeneous microstructure with typical inter- and intra-grain cracks. Magnetic measurements indicated ferrimagnetic properties that were explained by non-stoichiometry of the obtained compound and an excess of manganese that was confirmed by ICP analysis.
TY - JOUR
AU - Branković, Zorica
AU - Branković, Goran
AU - Počuča-Nešić, Milica
AU - Marinković-Stanojević, Zorica
AU - Žunić, Milan
AU - Luković Golić, Danijela
AU - Tararam, R.
AU - Cilense, Mario
AU - Zaghete, M. A.
AU - Jaglicic, Z.
AU - Jagodic, M.
AU - Varela, JA
PY - 2015
UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/881
AB - In this work single phase hexagonal YMnO3 powders were prepared starting from Y(CH3COO)(3)center dot xH(2)O, Mn(CH3COO)(2)center dot 4H(2)O, KMnO4 and KOH using methods of conventional (280 degrees C for 6 h) or microwave assisted hydrothermal synthesis (200 degrees C for 2 h) followed by calcination at 1200 degrees C for 2 h. According to FESEM analysis the calcined powders consisted of submicronic YMnO3 particles, which were uniform in shape and size. Ceramic samples were obtained by sintering the as-synthesized powders at 1400 degrees C for 2 h. XRD analysis confirmed the presence of the single phase hexagonal YMnO3. SEM analysis showed a dense and homogeneous microstructure with typical inter- and intra-grain cracks. Magnetic measurements indicated ferrimagnetic properties that were explained by non-stoichiometry of the obtained compound and an excess of manganese that was confirmed by ICP analysis.
PB - Elsevier Sci Ltd, Oxford
T2 - Ceramics International
T1 - Hydrothermally assisted synthesis of YMnO3
EP - 14298
IS - 10
SP - 14293
VL - 41
DO - 10.1016/j.ceramint.2015.07.060
ER -
@article{
author = "Branković, Zorica and Branković, Goran and Počuča-Nešić, Milica and Marinković-Stanojević, Zorica and Žunić, Milan and Luković Golić, Danijela and Tararam, R. and Cilense, Mario and Zaghete, M. A. and Jaglicic, Z. and Jagodic, M. and Varela, JA",
year = "2015",
abstract = "In this work single phase hexagonal YMnO3 powders were prepared starting from Y(CH3COO)(3)center dot xH(2)O, Mn(CH3COO)(2)center dot 4H(2)O, KMnO4 and KOH using methods of conventional (280 degrees C for 6 h) or microwave assisted hydrothermal synthesis (200 degrees C for 2 h) followed by calcination at 1200 degrees C for 2 h. According to FESEM analysis the calcined powders consisted of submicronic YMnO3 particles, which were uniform in shape and size. Ceramic samples were obtained by sintering the as-synthesized powders at 1400 degrees C for 2 h. XRD analysis confirmed the presence of the single phase hexagonal YMnO3. SEM analysis showed a dense and homogeneous microstructure with typical inter- and intra-grain cracks. Magnetic measurements indicated ferrimagnetic properties that were explained by non-stoichiometry of the obtained compound and an excess of manganese that was confirmed by ICP analysis.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Hydrothermally assisted synthesis of YMnO3",
pages = "14298-14293",
number = "10",
volume = "41",
doi = "10.1016/j.ceramint.2015.07.060"
}
Branković, Z., Branković, G., Počuča-Nešić, M., Marinković-Stanojević, Z., Žunić, M., Luković Golić, D., Tararam, R., Cilense, M., Zaghete, M. A., Jaglicic, Z., Jagodic, M.,& Varela, J.. (2015). Hydrothermally assisted synthesis of YMnO3. in Ceramics International
Elsevier Sci Ltd, Oxford., 41(10), 14293-14298.
https://doi.org/10.1016/j.ceramint.2015.07.060
Branković Z, Branković G, Počuča-Nešić M, Marinković-Stanojević Z, Žunić M, Luković Golić D, Tararam R, Cilense M, Zaghete MA, Jaglicic Z, Jagodic M, Varela J. Hydrothermally assisted synthesis of YMnO3. in Ceramics International. 2015;41(10):14293-14298.
doi:10.1016/j.ceramint.2015.07.060 .
Branković, Zorica, Branković, Goran, Počuča-Nešić, Milica, Marinković-Stanojević, Zorica, Žunić, Milan, Luković Golić, Danijela, Tararam, R., Cilense, Mario, Zaghete, M. A., Jaglicic, Z., Jagodic, M., Varela, JA, "Hydrothermally assisted synthesis of YMnO3" in Ceramics International, 41, no. 10 (2015):14293-14298,
https://doi.org/10.1016/j.ceramint.2015.07.060 . .
