Search
Now showing items 31-36 of 36
Structure and properties of chemically synthesized BiFeO3. Influence of fuel and complexing agent
(Elsevier Sci Ltd, Oxford, 2015)
Perovskite, single multiferroic bismuth ferrite was prepared by two chemical methods: auto-combustion and soft chemical route. Influence of different fuels and complexing agents and thermal treatment on purity of bismuth ...
Transformation of Cs-exchanged clinoptilolite to CsAlSi5O12 by hot-pressing
(Elsevier Sci Ltd, Oxford, 2017)
Dense CsAlSi5O12 was successfully obtained by hot pressing of Cs-exchanged clinoptilolite at 900 degrees C. Simultaneous application of high temperature and mechanical pressure allowed formation of CsAlSi5O12 at temperature ...
Magneto-electric properties of xNi(0.7)Zn(0.3)Fe(2)O(4) - (1-x)BaTiO3 multiferroic composites
(Elsevier Sci Ltd, Oxford, 2018)
Di-phase ceramic composites, with general formula xNi(0.7)Zn(0.3)Fe(2)O(4) - (1-x)BaTiO3(x = 0.9, 0.7, 0.5, 0.3, 0.1), were prepared by a mixing method. X-ray analysis, for powder and ceramics, indicated the formation of ...
PZT-nickel ferrite and PZT-cobalt ferrite comparative study: Structural, dielectric, ferroelectric and magnetic properties of composite ceramics
(Elsevier Sci Ltd, Oxford, 2018)
Comparative study of different PZT-based composite materials ((x)PbZr0.52Ti0.48O3 + (1-x)CoFe2O4 and (x) PbZr0.52Ti0.48O3 + (1-x)Ni0.7Zn0.3Fe2O4 (x = 0.8 and 0.9)) is presented in the frame of structural, dielectric, ...
Visible-light active mesoporous, nanocrystalline N,S-doped and co-doped titania photocatalysts synthesized by non-hydrolytic sol-gel route
(Elsevier Sci Ltd, Oxford, 2016)
Visible-light active mesoporous N,S-doped and co-doped anatase TiO2 powders were synthesized by non-hydrolytic sol-gel route, starting from TiCl4 and Ti((OPr)-Pr-i)(4) dissolved in cyclohexane or dimethyl sulfoxide, later ...
Nanoindentation study of nickel manganite ceramics obtained by a complex polymerization method
(Elsevier Sci Ltd, Oxford, 2016)
The chemical synthesis of nickel manganite powder was performed by a complex polymerization method (CPM). The obtained fine nanoscaled powders were uniaxially pressed and sintered at different temperatures: 1000-1200 degrees ...