TY  - CONF
AU  - Branković, Goran
AU  - Branković, Zorica
AU  - Vojisavljević, Katarina
AU  - Malešević, Aleksandar
AU  - Marinković Stanojević, Zorica
AU  - Počuča-Nešić, Milica
AU  - Mitrović, Jelena
AU  - Rostovtsev, Yuri
PY  - 2023
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2088
AB  - Numerous methods have been utilized for molecular detection, including optical, calorimetric, acoustic, and techniques based on changes in electrical properties, such as metal oxide semiconductor sensors [1,2]. Recent research endeavors have led to a significant rise in sensitivity, detecting parts per billion (ppb) [3], but the challenges of selectivity and cross-sensing remain crucial areas of investigation. Developing a gas sensor with high selectivity to efficiently analyze multi-gas mixtures would be of great significance, with potential applications in various fields such as technology, environmental control, biology, and medicine.
Quantum sensors are a promising new technology for the detection of gas mixtures. They offer a number of advantages over traditional methods, including high sensitivity, selectivity, and response time. In the presentation, we propose a new method based on the resonant interaction of dipole molecules with ac fields, in the presence of a dc electric and magnetic field that creates Zeeman and Stark splitting of molecular levels specific to certain molecules, ensuring selectivity [4].
In this talk, we present some preliminary experimental results obtained for the molecule NO on the use of quantum sensors for the detection of gas mixtures. Our results demonstrate the potential of quantum sensors for a variety of applications in gas sensing. We believe that quantum sensors have the potential to revolutionize the field of gas sensing.
1. X. Liu, et al. Sensors (Basel), 12 (2012) 9635–9665.
2. S. Lakkis, R. Younes, Y. Alayli, M. Sawan, Sensor Review, 34 (2014) 24–35.
3. J.-H. Lee, J.-Y. Kim, J.-H. Kim, S. S. Kim, Sensors (Basel), 19 (2019) 726.
4. Z. Branković, Y. Rostovtsev, Sci. Rep., 10 (2020) 1537.
PB  - University of Belgrade, Institute for Multidisciplinary Research
C3  - 7th Conference of the Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023, Belgrade, Serbia
T1  - Quantum sensors for gas mixture detection
SP  - 43
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2088
ER  - 

@conference{
author = "Branković, Goran and Branković, Zorica and Vojisavljević, Katarina and Malešević, Aleksandar and Marinković Stanojević, Zorica and Počuča-Nešić, Milica and Mitrović, Jelena and Rostovtsev, Yuri",
year = "2023",
abstract = "Numerous methods have been utilized for molecular detection, including optical, calorimetric, acoustic, and techniques based on changes in electrical properties, such as metal oxide semiconductor sensors [1,2]. Recent research endeavors have led to a significant rise in sensitivity, detecting parts per billion (ppb) [3], but the challenges of selectivity and cross-sensing remain crucial areas of investigation. Developing a gas sensor with high selectivity to efficiently analyze multi-gas mixtures would be of great significance, with potential applications in various fields such as technology, environmental control, biology, and medicine.
Quantum sensors are a promising new technology for the detection of gas mixtures. They offer a number of advantages over traditional methods, including high sensitivity, selectivity, and response time. In the presentation, we propose a new method based on the resonant interaction of dipole molecules with ac fields, in the presence of a dc electric and magnetic field that creates Zeeman and Stark splitting of molecular levels specific to certain molecules, ensuring selectivity [4].
In this talk, we present some preliminary experimental results obtained for the molecule NO on the use of quantum sensors for the detection of gas mixtures. Our results demonstrate the potential of quantum sensors for a variety of applications in gas sensing. We believe that quantum sensors have the potential to revolutionize the field of gas sensing.
1. X. Liu, et al. Sensors (Basel), 12 (2012) 9635–9665.
2. S. Lakkis, R. Younes, Y. Alayli, M. Sawan, Sensor Review, 34 (2014) 24–35.
3. J.-H. Lee, J.-Y. Kim, J.-H. Kim, S. S. Kim, Sensors (Basel), 19 (2019) 726.
4. Z. Branković, Y. Rostovtsev, Sci. Rep., 10 (2020) 1537.",
publisher = "University of Belgrade, Institute for Multidisciplinary Research",
journal = "7th Conference of the Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023, Belgrade, Serbia",
title = "Quantum sensors for gas mixture detection",
pages = "43",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2088"
}

Branković, G., Branković, Z., Vojisavljević, K., Malešević, A., Marinković Stanojević, Z., Počuča-Nešić, M., Mitrović, J.,& Rostovtsev, Y.. (2023). Quantum sensors for gas mixture detection. in 7th Conference of the Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023, Belgrade, Serbia
University of Belgrade, Institute for Multidisciplinary Research., 43.
https://hdl.handle.net/21.15107/rcub_rimsi_2088

Branković G, Branković Z, Vojisavljević K, Malešević A, Marinković Stanojević Z, Počuča-Nešić M, Mitrović J, Rostovtsev Y. Quantum sensors for gas mixture detection. in 7th Conference of the Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023, Belgrade, Serbia. 2023;:43.
https://hdl.handle.net/21.15107/rcub_rimsi_2088 .

Branković, Goran, Branković, Zorica, Vojisavljević, Katarina, Malešević, Aleksandar, Marinković Stanojević, Zorica, Počuča-Nešić, Milica, Mitrović, Jelena, Rostovtsev, Yuri, "Quantum sensors for gas mixture detection" in 7th Conference of the Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023, Belgrade, Serbia (2023):43,
https://hdl.handle.net/21.15107/rcub_rimsi_2088 .

TY  - CONF
AU  - Počuča-Nešić, Milica
AU  - Vukašinović, Jelena
AU  - Dapčević, Aleksandra
AU  - Ribić, Vesna
AU  - Branković, Zorica
AU  - Vojisavljević, Katarina
AU  - Marinković Stanojević, Zorica
AU  - Branković, Goran
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2031
AB  - Dyes released from textile industries present a big threat to the environment, and
remediation of wastewaters became one of the major scientific challenges. In recent
years, there has been a great need for catalysts that would oxidize pollutants under
dark ambient conditions without the use of external stimulants like light,
temperature, or additional chemicals such as O3, H2O2. Efficient work of these
catalysts would significantly reduce the energy consumption. Among other
materials, perovskite-type oxides with general formula ABO3 emerged as possible
catalysts for dye degradation in the dark conditions. Lanthanum nickelates with
single (LaNiO3) and layered perovskite structure (La4Ni3O10, La3Ni2O7, La2NiO4)
showed good catalytic properties, due to the existence of nickel in two oxidation
states (Ni2+ and Ni3+) and the oxygen non-stoichiometry in these materials [1].
This study presents structural, microstructural and catalytic properties of the
LaNi1-xNbxO3-based (xNb = 0.000, 0,005 and 0,010; La-Ni-Nb-O) powders prepared
by mechanical activation method. The XRD (X-Ray Diffraction) analysis revealed
the existence of a multiphase oxide system, including layered structures of
nickelates Lan+1NinO3n+1 (n = 3, 2, 1, 0) and NiO phase in all La-Ni-Nb-O-based
powders. Also, the HRTEM (High Resolution Transmission Electron Microscopy)
analysis confirmed the presence of structural polytypes in these powders. The
catalytic properties of La-Ni-Nb-O-based powders were investigated by degradation
of the anionic azo dye, Reactive Orange 16 (RO16), under dark ambient conditions
at different pH values (3, 6.5, 9.5 and 11) and temperature of 20 °C. The best
catalytic efficiency in the degradation of RO16 dye showed the sample with x(Nb) =
0.010 in acidic solution, where the residual of RO16 dye was about 4.5 % after 330
minutes. The reusability test for this powder in degradation process of RO16 dye
showed that the sample with x(Nb) = 0.010 retained its catalytic activity during three
cycles.
1. W. Zhong et al., Appl. Catal. A, Gen., 549 (2018) 302.
PB  - University of Belgrade, Institute for Multidisciplinary Research
C3  - 6th Conference of the Serbian Society for Ceramic Materials, 6CSCS-2022, June 28-29, 2022, Belgrade, Serbia
T1  - The catalytic degradation of RO16 dye under dark ambient conditions using La-Ni-Nb-O-based powders
SP  - 63
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2031
ER  - 

@conference{
author = "Počuča-Nešić, Milica and Vukašinović, Jelena and Dapčević, Aleksandra and Ribić, Vesna and Branković, Zorica and Vojisavljević, Katarina and Marinković Stanojević, Zorica and Branković, Goran",
year = "2022",
abstract = "Dyes released from textile industries present a big threat to the environment, and
remediation of wastewaters became one of the major scientific challenges. In recent
years, there has been a great need for catalysts that would oxidize pollutants under
dark ambient conditions without the use of external stimulants like light,
temperature, or additional chemicals such as O3, H2O2. Efficient work of these
catalysts would significantly reduce the energy consumption. Among other
materials, perovskite-type oxides with general formula ABO3 emerged as possible
catalysts for dye degradation in the dark conditions. Lanthanum nickelates with
single (LaNiO3) and layered perovskite structure (La4Ni3O10, La3Ni2O7, La2NiO4)
showed good catalytic properties, due to the existence of nickel in two oxidation
states (Ni2+ and Ni3+) and the oxygen non-stoichiometry in these materials [1].
This study presents structural, microstructural and catalytic properties of the
LaNi1-xNbxO3-based (xNb = 0.000, 0,005 and 0,010; La-Ni-Nb-O) powders prepared
by mechanical activation method. The XRD (X-Ray Diffraction) analysis revealed
the existence of a multiphase oxide system, including layered structures of
nickelates Lan+1NinO3n+1 (n = 3, 2, 1, 0) and NiO phase in all La-Ni-Nb-O-based
powders. Also, the HRTEM (High Resolution Transmission Electron Microscopy)
analysis confirmed the presence of structural polytypes in these powders. The
catalytic properties of La-Ni-Nb-O-based powders were investigated by degradation
of the anionic azo dye, Reactive Orange 16 (RO16), under dark ambient conditions
at different pH values (3, 6.5, 9.5 and 11) and temperature of 20 °C. The best
catalytic efficiency in the degradation of RO16 dye showed the sample with x(Nb) =
0.010 in acidic solution, where the residual of RO16 dye was about 4.5 % after 330
minutes. The reusability test for this powder in degradation process of RO16 dye
showed that the sample with x(Nb) = 0.010 retained its catalytic activity during three
cycles.
1. W. Zhong et al., Appl. Catal. A, Gen., 549 (2018) 302.",
publisher = "University of Belgrade, Institute for Multidisciplinary Research",
journal = "6th Conference of the Serbian Society for Ceramic Materials, 6CSCS-2022, June 28-29, 2022, Belgrade, Serbia",
title = "The catalytic degradation of RO16 dye under dark ambient conditions using La-Ni-Nb-O-based powders",
pages = "63",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2031"
}

Počuča-Nešić, M., Vukašinović, J., Dapčević, A., Ribić, V., Branković, Z., Vojisavljević, K., Marinković Stanojević, Z.,& Branković, G.. (2022). The catalytic degradation of RO16 dye under dark ambient conditions using La-Ni-Nb-O-based powders. in 6th Conference of the Serbian Society for Ceramic Materials, 6CSCS-2022, June 28-29, 2022, Belgrade, Serbia
University of Belgrade, Institute for Multidisciplinary Research., 63.
https://hdl.handle.net/21.15107/rcub_rimsi_2031

Počuča-Nešić M, Vukašinović J, Dapčević A, Ribić V, Branković Z, Vojisavljević K, Marinković Stanojević Z, Branković G. The catalytic degradation of RO16 dye under dark ambient conditions using La-Ni-Nb-O-based powders. in 6th Conference of the Serbian Society for Ceramic Materials, 6CSCS-2022, June 28-29, 2022, Belgrade, Serbia. 2022;:63.
https://hdl.handle.net/21.15107/rcub_rimsi_2031 .

Počuča-Nešić, Milica, Vukašinović, Jelena, Dapčević, Aleksandra, Ribić, Vesna, Branković, Zorica, Vojisavljević, Katarina, Marinković Stanojević, Zorica, Branković, Goran, "The catalytic degradation of RO16 dye under dark ambient conditions using La-Ni-Nb-O-based powders" in 6th Conference of the Serbian Society for Ceramic Materials, 6CSCS-2022, June 28-29, 2022, Belgrade, Serbia (2022):63,
https://hdl.handle.net/21.15107/rcub_rimsi_2031 .

TY  - JOUR
AU  - Počuča-Nešić, Milica
AU  - Marinković Stanojević, Zorica
AU  - Radović, Miladin
AU  - Benitez, Rogelio
AU  - Jagodic, Marko
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1420
AB  - Intergranular and intragranular cracks that usually form during sintering of yttrium manganite (YMnO3) ceramic samples hinder the densification process of this ceramic and deteriorate its magnetic and ferroelectric properties. To overcome this problem, mechanochemically synthesized YMnO3 powder was sintered using two different processes: Conventional Sintering (CS) and Pulsed Electric Current Sintering (PECS). All samples were characterized by XRD, SEM and FESEM and their magnetic and ferroelectric properties were investigated. Apart from their phase composition, conventionally sintered ceramic samples showed cracks throughout their whole volume, reaching a maximum relative density of 85 %. However, it was found that PECS process could significantly reduce the presence of cracks within samples whose relative density reached 99.8 %.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods
EP  - 496
IS  - 4
SP  - 485
VL  - 53
DO  - 10.2298/SOS2104485P
ER  - 

@article{
author = "Počuča-Nešić, Milica and Marinković Stanojević, Zorica and Radović, Miladin and Benitez, Rogelio and Jagodic, Marko and Branković, Goran and Branković, Zorica",
year = "2021",
abstract = "Intergranular and intragranular cracks that usually form during sintering of yttrium manganite (YMnO3) ceramic samples hinder the densification process of this ceramic and deteriorate its magnetic and ferroelectric properties. To overcome this problem, mechanochemically synthesized YMnO3 powder was sintered using two different processes: Conventional Sintering (CS) and Pulsed Electric Current Sintering (PECS). All samples were characterized by XRD, SEM and FESEM and their magnetic and ferroelectric properties were investigated. Apart from their phase composition, conventionally sintered ceramic samples showed cracks throughout their whole volume, reaching a maximum relative density of 85 %. However, it was found that PECS process could significantly reduce the presence of cracks within samples whose relative density reached 99.8 %.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods",
pages = "496-485",
number = "4",
volume = "53",
doi = "10.2298/SOS2104485P"
}

Počuča-Nešić, M., Marinković Stanojević, Z., Radović, M., Benitez, R., Jagodic, M., Branković, G.,& Branković, Z.. (2021). Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 53(4), 485-496.
https://doi.org/10.2298/SOS2104485P

Počuča-Nešić M, Marinković Stanojević Z, Radović M, Benitez R, Jagodic M, Branković G, Branković Z. Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods. in Science of Sintering. 2021;53(4):485-496.
doi:10.2298/SOS2104485P .

Počuča-Nešić, Milica, Marinković Stanojević, Zorica, Radović, Miladin, Benitez, Rogelio, Jagodic, Marko, Branković, Goran, Branković, Zorica, "Processing and Properties of Ceramic Yttrium Manganite Sintered by Different Methods" in Science of Sintering, 53, no. 4 (2021):485-496,
https://doi.org/10.2298/SOS2104485P . .

TY  - JOUR
AU  - Počuča-Nešić, Milica
AU  - Marinković Stanojević, Zorica
AU  - Smole, Patricia Cotic
AU  - Dapčević, Aleksandra
AU  - Tasić, Nikola
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1265
AB  - Yttrium manganite (YMnO3) is widely investigated multiferroic material with potential use in many technological applications. In this paper, we report on the preparation and characterization of multiferroic hexagonal YMnO3 ceramics obtained by chemical synthesis route. Precursor powders were prepared by the polymerizable complex method from citrate precursors. After calcination at 900 degrees C the powders contained mixture of Y-Mn-O phases which were further sintered at different temperatures. XRD analysis revealed that sintering at 1400 degrees C resulted in the formation of pure hexagonal YMnO3. Density of the obtained ceramics was 96 %TD. The ceramic samples proved to have multiferroic properties - they are antiferromagnetic below 42 K with linear dependence of magnetization as a function of applied magnetic field. The ferroelectric measurements performed at room temperature showed remanent polarization of 0.21 mu C/cm(2) and the coercive field of 6.0 kV/cm for the YMnO3 sample sintered at 1400 degrees C. The magnetization curves measured at 2 and 5 K for the powder samples calcined at 900 degrees C and ceramic samples sintered at 1300 degrees C exhibited a hysteresis loop due to a small concentration of Mn3O4 in the samples.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Processing and properties of pure antiferromagnetic h-YMnO3
EP  - 434
IS  - 4
SP  - 427
VL  - 13
DO  - 10.2298/PAC1904427P
ER  - 

@article{
author = "Počuča-Nešić, Milica and Marinković Stanojević, Zorica and Smole, Patricia Cotic and Dapčević, Aleksandra and Tasić, Nikola and Branković, Goran and Branković, Zorica",
year = "2019",
abstract = "Yttrium manganite (YMnO3) is widely investigated multiferroic material with potential use in many technological applications. In this paper, we report on the preparation and characterization of multiferroic hexagonal YMnO3 ceramics obtained by chemical synthesis route. Precursor powders were prepared by the polymerizable complex method from citrate precursors. After calcination at 900 degrees C the powders contained mixture of Y-Mn-O phases which were further sintered at different temperatures. XRD analysis revealed that sintering at 1400 degrees C resulted in the formation of pure hexagonal YMnO3. Density of the obtained ceramics was 96 %TD. The ceramic samples proved to have multiferroic properties - they are antiferromagnetic below 42 K with linear dependence of magnetization as a function of applied magnetic field. The ferroelectric measurements performed at room temperature showed remanent polarization of 0.21 mu C/cm(2) and the coercive field of 6.0 kV/cm for the YMnO3 sample sintered at 1400 degrees C. The magnetization curves measured at 2 and 5 K for the powder samples calcined at 900 degrees C and ceramic samples sintered at 1300 degrees C exhibited a hysteresis loop due to a small concentration of Mn3O4 in the samples.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Processing and properties of pure antiferromagnetic h-YMnO3",
pages = "434-427",
number = "4",
volume = "13",
doi = "10.2298/PAC1904427P"
}

Počuča-Nešić, M., Marinković Stanojević, Z., Smole, P. C., Dapčević, A., Tasić, N., Branković, G.,& Branković, Z.. (2019). Processing and properties of pure antiferromagnetic h-YMnO3. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 13(4), 427-434.
https://doi.org/10.2298/PAC1904427P

Počuča-Nešić M, Marinković Stanojević Z, Smole PC, Dapčević A, Tasić N, Branković G, Branković Z. Processing and properties of pure antiferromagnetic h-YMnO3. in Processing and Application of Ceramics. 2019;13(4):427-434.
doi:10.2298/PAC1904427P .

Počuča-Nešić, Milica, Marinković Stanojević, Zorica, Smole, Patricia Cotic, Dapčević, Aleksandra, Tasić, Nikola, Branković, Goran, Branković, Zorica, "Processing and properties of pure antiferromagnetic h-YMnO3" in Processing and Application of Ceramics, 13, no. 4 (2019):427-434,
https://doi.org/10.2298/PAC1904427P . .

TY  - JOUR
AU  - Radojković, Aleksandar
AU  - Luković Golić, Danijela
AU  - Ćirković, Jovana
AU  - Marinković Stanojević, Zorica
AU  - Pajić, Damir
AU  - Toric, Filip
AU  - Dapčević, Aleksandra
AU  - Vulić, Predrag
AU  - Branković, Zorica
AU  - Branković, Goran
PY  - 2018
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1162
AB  - Bulk ceramic samples of BiFeO3 were light doped (up to 1%) with Nb5+ in the place of Fe3+ (B-site doping) and their multiferroic properties were investigated using XRD, SEM, polarization (PMTS) and magnetization (SQUID) techniques. It is shown that even the small percentages of doping can notably change electric and magnetic behavior. Electric conductivity differs by two orders of magnitude between samples doped with 0.2% and 1% Nb. The ferroelectric behavior strongly depended on conduction mechanism, and transition from space-charge-limited current (SCLC) conduction to trap-filled limited (TFL) conduction regime reflected on a change in hysteresis patterns, particularly for the samples with 0.2% and 0.5% Nb. Separation of ZFC-FC magnetization curves occurred for all Nb concentrations and increased with Nb doping. Weak ferromagnetic behavior and the increase of remnant magnetization with Nb concentration was observed from the hysteresis measurements. Coercive field changed drastically compared to the pure BiFeO3, namely, the sample with 1% Nb exhibited very high coercive magnetic field of 10 kOe.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Tuning of BiFeO3 multiferroic properties by light doping with Nb
EP  - 16744
IS  - 14
SP  - 16739
VL  - 44
DO  - 10.1016/j.ceramint.2018.06.103
ER  - 

@article{
author = "Radojković, Aleksandar and Luković Golić, Danijela and Ćirković, Jovana and Marinković Stanojević, Zorica and Pajić, Damir and Toric, Filip and Dapčević, Aleksandra and Vulić, Predrag and Branković, Zorica and Branković, Goran",
year = "2018",
abstract = "Bulk ceramic samples of BiFeO3 were light doped (up to 1%) with Nb5+ in the place of Fe3+ (B-site doping) and their multiferroic properties were investigated using XRD, SEM, polarization (PMTS) and magnetization (SQUID) techniques. It is shown that even the small percentages of doping can notably change electric and magnetic behavior. Electric conductivity differs by two orders of magnitude between samples doped with 0.2% and 1% Nb. The ferroelectric behavior strongly depended on conduction mechanism, and transition from space-charge-limited current (SCLC) conduction to trap-filled limited (TFL) conduction regime reflected on a change in hysteresis patterns, particularly for the samples with 0.2% and 0.5% Nb. Separation of ZFC-FC magnetization curves occurred for all Nb concentrations and increased with Nb doping. Weak ferromagnetic behavior and the increase of remnant magnetization with Nb concentration was observed from the hysteresis measurements. Coercive field changed drastically compared to the pure BiFeO3, namely, the sample with 1% Nb exhibited very high coercive magnetic field of 10 kOe.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Tuning of BiFeO3 multiferroic properties by light doping with Nb",
pages = "16744-16739",
number = "14",
volume = "44",
doi = "10.1016/j.ceramint.2018.06.103"
}

Radojković, A., Luković Golić, D., Ćirković, J., Marinković Stanojević, Z., Pajić, D., Toric, F., Dapčević, A., Vulić, P., Branković, Z.,& Branković, G.. (2018). Tuning of BiFeO3 multiferroic properties by light doping with Nb. in Ceramics International
Elsevier Sci Ltd, Oxford., 44(14), 16739-16744.
https://doi.org/10.1016/j.ceramint.2018.06.103

Radojković A, Luković Golić D, Ćirković J, Marinković Stanojević Z, Pajić D, Toric F, Dapčević A, Vulić P, Branković Z, Branković G. Tuning of BiFeO3 multiferroic properties by light doping with Nb. in Ceramics International. 2018;44(14):16739-16744.
doi:10.1016/j.ceramint.2018.06.103 .

Radojković, Aleksandar, Luković Golić, Danijela, Ćirković, Jovana, Marinković Stanojević, Zorica, Pajić, Damir, Toric, Filip, Dapčević, Aleksandra, Vulić, Predrag, Branković, Zorica, Branković, Goran, "Tuning of BiFeO3 multiferroic properties by light doping with Nb" in Ceramics International, 44, no. 14 (2018):16739-16744,
https://doi.org/10.1016/j.ceramint.2018.06.103 . .

TY  - JOUR
AU  - Tasić, Nikola
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
AU  - Žunić, Milan
AU  - Lačnjevac, Uroš
AU  - Gilic, Martina
AU  - Novaković, Tatjana
AU  - Branković, Goran
PY  - 2018
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1150
AB  - Mesoporous TiO2 films with spherical architectures and promising performance in dye-sensitized solar cells (DSSCs) were prepared. The morphology of the films was investigated by scanning electron microscopy. Transmission electron microscopy analysis of the spheres disclosed the elongated shape of sub-20nm primary particles, while BET analysis revealed their high surface area of 135 m(2)/g. Anatase presence was observed in the films based on X-ray diffractometry, selected-area electron diffraction analysis and Raman spectroscopy analyses. Increased light scattering of the spheres in visible region was observed by UV-VIS-NIR spectroscopy. Photovoltaic performance of the operating N719-sensitized cells was tested using electrochemical impedance spectroscopy and current density-voltage (J-V) curves under simulated AMI. 5 spectrum. The 0.25 cm(2) cells exhibited photo-to-electric power efficiency of 4.9%, which is among noteworthy values for DSSCs with similar photoanodic structures.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Mesoporous TiO2 spheres as a photoanodic material in dye-sensitized solar cells
EP  - 382
IS  - 4
SP  - 374
VL  - 12
DO  - 10.2298/PAC1804374T
ER  - 

@article{
author = "Tasić, Nikola and Marinković Stanojević, Zorica and Branković, Zorica and Žunić, Milan and Lačnjevac, Uroš and Gilic, Martina and Novaković, Tatjana and Branković, Goran",
year = "2018",
abstract = "Mesoporous TiO2 films with spherical architectures and promising performance in dye-sensitized solar cells (DSSCs) were prepared. The morphology of the films was investigated by scanning electron microscopy. Transmission electron microscopy analysis of the spheres disclosed the elongated shape of sub-20nm primary particles, while BET analysis revealed their high surface area of 135 m(2)/g. Anatase presence was observed in the films based on X-ray diffractometry, selected-area electron diffraction analysis and Raman spectroscopy analyses. Increased light scattering of the spheres in visible region was observed by UV-VIS-NIR spectroscopy. Photovoltaic performance of the operating N719-sensitized cells was tested using electrochemical impedance spectroscopy and current density-voltage (J-V) curves under simulated AMI. 5 spectrum. The 0.25 cm(2) cells exhibited photo-to-electric power efficiency of 4.9%, which is among noteworthy values for DSSCs with similar photoanodic structures.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Mesoporous TiO2 spheres as a photoanodic material in dye-sensitized solar cells",
pages = "382-374",
number = "4",
volume = "12",
doi = "10.2298/PAC1804374T"
}

Tasić, N., Marinković Stanojević, Z., Branković, Z., Žunić, M., Lačnjevac, U., Gilic, M., Novaković, T.,& Branković, G.. (2018). Mesoporous TiO2 spheres as a photoanodic material in dye-sensitized solar cells. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 12(4), 374-382.
https://doi.org/10.2298/PAC1804374T

Tasić N, Marinković Stanojević Z, Branković Z, Žunić M, Lačnjevac U, Gilic M, Novaković T, Branković G. Mesoporous TiO2 spheres as a photoanodic material in dye-sensitized solar cells. in Processing and Application of Ceramics. 2018;12(4):374-382.
doi:10.2298/PAC1804374T .

Tasić, Nikola, Marinković Stanojević, Zorica, Branković, Zorica, Žunić, Milan, Lačnjevac, Uroš, Gilic, Martina, Novaković, Tatjana, Branković, Goran, "Mesoporous TiO2 spheres as a photoanodic material in dye-sensitized solar cells" in Processing and Application of Ceramics, 12, no. 4 (2018):374-382,
https://doi.org/10.2298/PAC1804374T . .

TY  - CONF
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Dapčević, Aleksandra
AU  - Ćirković, Jovana
AU  - Tasić, Nikola
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
AU  - Branković, Goran
PY  - 2017
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2375
AB  - Bi1-xGdxFeO3 (x = 0.01; 0.05; 0.075; 0.09; 0.10; 0.20; 0.30) powders were synthesized by hydro-evaporation method. The optimization of sintering conditions indicated that temperature of 870 °C and time of 6 hours (after pressing at 9 t/cm2) provided the densest ceramics samples (up to 88 % of theoretical density) and the lowest amount of secondary phases ( 5.5 wt%). The increase of gadolinium content resulted in polar-to-nonpolar (R3c  Pnma) structural phase transition at about x = 0.10, which was reflected on deterioration of ferroelectric property. Structural analysis indicated decrease of unit cell volume with the increase of x, but the (Bi,Gd)–Fe distance did not exhibit regularity in change. The bismuth ferrite ceramics samples doped with x = 0.075 and x = 0.09 of gadolinium showed the greatest lattice distortion along the [111] axis. These samples also exhibited larger values of remnant electric polarization and less leakage processes than the pure bismuth ferrite ceramics samples. Magnetic behavior of Bi1-xGdxFeO3 samples revealed that the weak ferromagnetic moment strengthened with increase of the gadolinium content.
PB  - Institut za multidisciplinarna istraživanja, Kneza Višeslava 1, 11000 Belgrade, Serbia
C3  - 4th Conference of the Serbian Society for Ceranic Materials, June 14-16, 2017, Belgrade, Serbia, 4CSCS-2017
T1  - The effect of gadolinium substitution on the structural, ferroelectric and magnetic properties of bismuth ferrite ceramics
SP  - 92
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2375
ER  - 

@conference{
author = "Luković Golić, Danijela and Radojković, Aleksandar and Dapčević, Aleksandra and Ćirković, Jovana and Tasić, Nikola and Marinković Stanojević, Zorica and Branković, Zorica and Branković, Goran",
year = "2017",
abstract = "Bi1-xGdxFeO3 (x = 0.01; 0.05; 0.075; 0.09; 0.10; 0.20; 0.30) powders were synthesized by hydro-evaporation method. The optimization of sintering conditions indicated that temperature of 870 °C and time of 6 hours (after pressing at 9 t/cm2) provided the densest ceramics samples (up to 88 % of theoretical density) and the lowest amount of secondary phases ( 5.5 wt%). The increase of gadolinium content resulted in polar-to-nonpolar (R3c  Pnma) structural phase transition at about x = 0.10, which was reflected on deterioration of ferroelectric property. Structural analysis indicated decrease of unit cell volume with the increase of x, but the (Bi,Gd)–Fe distance did not exhibit regularity in change. The bismuth ferrite ceramics samples doped with x = 0.075 and x = 0.09 of gadolinium showed the greatest lattice distortion along the [111] axis. These samples also exhibited larger values of remnant electric polarization and less leakage processes than the pure bismuth ferrite ceramics samples. Magnetic behavior of Bi1-xGdxFeO3 samples revealed that the weak ferromagnetic moment strengthened with increase of the gadolinium content.",
publisher = "Institut za multidisciplinarna istraživanja, Kneza Višeslava 1, 11000 Belgrade, Serbia",
journal = "4th Conference of the Serbian Society for Ceranic Materials, June 14-16, 2017, Belgrade, Serbia, 4CSCS-2017",
title = "The effect of gadolinium substitution on the structural, ferroelectric and magnetic properties of bismuth ferrite ceramics",
pages = "92",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2375"
}

Luković Golić, D., Radojković, A., Dapčević, A., Ćirković, J., Tasić, N., Marinković Stanojević, Z., Branković, Z.,& Branković, G.. (2017). The effect of gadolinium substitution on the structural, ferroelectric and magnetic properties of bismuth ferrite ceramics. in 4th Conference of the Serbian Society for Ceranic Materials, June 14-16, 2017, Belgrade, Serbia, 4CSCS-2017
Institut za multidisciplinarna istraživanja, Kneza Višeslava 1, 11000 Belgrade, Serbia., 92.
https://hdl.handle.net/21.15107/rcub_rimsi_2375

Luković Golić D, Radojković A, Dapčević A, Ćirković J, Tasić N, Marinković Stanojević Z, Branković Z, Branković G. The effect of gadolinium substitution on the structural, ferroelectric and magnetic properties of bismuth ferrite ceramics. in 4th Conference of the Serbian Society for Ceranic Materials, June 14-16, 2017, Belgrade, Serbia, 4CSCS-2017. 2017;:92.
https://hdl.handle.net/21.15107/rcub_rimsi_2375 .

Luković Golić, Danijela, Radojković, Aleksandar, Dapčević, Aleksandra, Ćirković, Jovana, Tasić, Nikola, Marinković Stanojević, Zorica, Branković, Zorica, Branković, Goran, "The effect of gadolinium substitution on the structural, ferroelectric and magnetic properties of bismuth ferrite ceramics" in 4th Conference of the Serbian Society for Ceranic Materials, June 14-16, 2017, Belgrade, Serbia, 4CSCS-2017 (2017):92,
https://hdl.handle.net/21.15107/rcub_rimsi_2375 .

TY  - JOUR
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Ćirković, Jovana
AU  - Dapčević, Aleksandra
AU  - Pajić, Damir
AU  - Tasić, Nikola
AU  - Savić, Slavica M.
AU  - Počuča-Nešić, Milica
AU  - Marković, Smilja
AU  - Branković, Goran
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1017
AB  - BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. Optimization of sintering conditions indicated that temperature of 800 degrees C and time of 2 h after pressing at 9 t/cm(2) provided ceramics samples with"the highest density (up to 96% of theoretical density) and the lowest content of secondary phases. Ferroelectric and magnetic characterization was performed on two selected ceramics samples with the highest densities. Ceramics obtained from the powder synthesized by the hydrothermal method showed greater lattice distortion along [1 1 1] axis and smaller grains, which resulted in larger values of electric polarization at room temperature. It also exhibited less Fe(3d)-O(2p) orbital overlapping due to a larger Fe-O-Fe bond angle, causing lower antiferromagnetic ordering and weak ferromagnetic behavior at low temperatures.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods
EP  - 1631
IS  - 7
SP  - 1623
VL  - 36
DO  - 10.1016/j.jeurceramsoc.2016.01.031
ER  - 

@article{
author = "Luković Golić, Danijela and Radojković, Aleksandar and Ćirković, Jovana and Dapčević, Aleksandra and Pajić, Damir and Tasić, Nikola and Savić, Slavica M. and Počuča-Nešić, Milica and Marković, Smilja and Branković, Goran and Marinković Stanojević, Zorica and Branković, Zorica",
year = "2016",
abstract = "BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. Optimization of sintering conditions indicated that temperature of 800 degrees C and time of 2 h after pressing at 9 t/cm(2) provided ceramics samples with"the highest density (up to 96% of theoretical density) and the lowest content of secondary phases. Ferroelectric and magnetic characterization was performed on two selected ceramics samples with the highest densities. Ceramics obtained from the powder synthesized by the hydrothermal method showed greater lattice distortion along [1 1 1] axis and smaller grains, which resulted in larger values of electric polarization at room temperature. It also exhibited less Fe(3d)-O(2p) orbital overlapping due to a larger Fe-O-Fe bond angle, causing lower antiferromagnetic ordering and weak ferromagnetic behavior at low temperatures.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods",
pages = "1631-1623",
number = "7",
volume = "36",
doi = "10.1016/j.jeurceramsoc.2016.01.031"
}

Luković Golić, D., Radojković, A., Ćirković, J., Dapčević, A., Pajić, D., Tasić, N., Savić, S. M., Počuča-Nešić, M., Marković, S., Branković, G., Marinković Stanojević, Z.,& Branković, Z.. (2016). Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 36(7), 1623-1631.
https://doi.org/10.1016/j.jeurceramsoc.2016.01.031

Luković Golić D, Radojković A, Ćirković J, Dapčević A, Pajić D, Tasić N, Savić SM, Počuča-Nešić M, Marković S, Branković G, Marinković Stanojević Z, Branković Z. Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods. in Journal of the European Ceramic Society. 2016;36(7):1623-1631.
doi:10.1016/j.jeurceramsoc.2016.01.031 .

Luković Golić, Danijela, Radojković, Aleksandar, Ćirković, Jovana, Dapčević, Aleksandra, Pajić, Damir, Tasić, Nikola, Savić, Slavica M., Počuča-Nešić, Milica, Marković, Smilja, Branković, Goran, Marinković Stanojević, Zorica, Branković, Zorica, "Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods" in Journal of the European Ceramic Society, 36, no. 7 (2016):1623-1631,
https://doi.org/10.1016/j.jeurceramsoc.2016.01.031 . .

TY  - JOUR
AU  - Branković, Zorica
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Ćirković, Jovana
AU  - Pajić, Damir
AU  - Marinković Stanojević, Zorica
AU  - Xing, Junwei
AU  - Radović, Miladin
AU  - Li, Guorong
AU  - Branković, Goran
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/964
AB  - Bismuth ferrite, BiFeO3 (BFO), powder was synthesized by hydrothermal method from Bi(NO3)(3)center dot 5H(2)O and Fe(NO3)(3)center dot 9H(2)O as precursors. The synthesized powder was further sintered using spark plasma sintering (SPS). The sintering conditions were optimized in order to achieve high density, minimal amount of secondary phases and improved ferroelectric andmagnetic properties. The optimal structure and properties were achieved after spark plasma sintering at 630 degrees C for 20min, under uniaxial pressure of 90MPa. The composition, microstructure, ferroelectric and magnetic properties of the SPS samples were characterized and compared to those of conventionally sintered ceramics obtained from the same powder. Although the samples sintered using conventional method showed slightly lower amount of secondary phases, the spark plasma sintered samples exhibited favourable microstructure and better ferroelectric properties.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Spark plasma sintering of hydrothermally synthesized bismuth ferrite
EP  - 264
IS  - 4
SP  - 257
VL  - 10
DO  - 10.2298/PAC1604257B
ER  - 

@article{
author = "Branković, Zorica and Luković Golić, Danijela and Radojković, Aleksandar and Ćirković, Jovana and Pajić, Damir and Marinković Stanojević, Zorica and Xing, Junwei and Radović, Miladin and Li, Guorong and Branković, Goran",
year = "2016",
abstract = "Bismuth ferrite, BiFeO3 (BFO), powder was synthesized by hydrothermal method from Bi(NO3)(3)center dot 5H(2)O and Fe(NO3)(3)center dot 9H(2)O as precursors. The synthesized powder was further sintered using spark plasma sintering (SPS). The sintering conditions were optimized in order to achieve high density, minimal amount of secondary phases and improved ferroelectric andmagnetic properties. The optimal structure and properties were achieved after spark plasma sintering at 630 degrees C for 20min, under uniaxial pressure of 90MPa. The composition, microstructure, ferroelectric and magnetic properties of the SPS samples were characterized and compared to those of conventionally sintered ceramics obtained from the same powder. Although the samples sintered using conventional method showed slightly lower amount of secondary phases, the spark plasma sintered samples exhibited favourable microstructure and better ferroelectric properties.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Spark plasma sintering of hydrothermally synthesized bismuth ferrite",
pages = "264-257",
number = "4",
volume = "10",
doi = "10.2298/PAC1604257B"
}

Branković, Z., Luković Golić, D., Radojković, A., Ćirković, J., Pajić, D., Marinković Stanojević, Z., Xing, J., Radović, M., Li, G.,& Branković, G.. (2016). Spark plasma sintering of hydrothermally synthesized bismuth ferrite. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 10(4), 257-264.
https://doi.org/10.2298/PAC1604257B

Branković Z, Luković Golić D, Radojković A, Ćirković J, Pajić D, Marinković Stanojević Z, Xing J, Radović M, Li G, Branković G. Spark plasma sintering of hydrothermally synthesized bismuth ferrite. in Processing and Application of Ceramics. 2016;10(4):257-264.
doi:10.2298/PAC1604257B .

Branković, Zorica, Luković Golić, Danijela, Radojković, Aleksandar, Ćirković, Jovana, Pajić, Damir, Marinković Stanojević, Zorica, Xing, Junwei, Radović, Miladin, Li, Guorong, Branković, Goran, "Spark plasma sintering of hydrothermally synthesized bismuth ferrite" in Processing and Application of Ceramics, 10, no. 4 (2016):257-264,
https://doi.org/10.2298/PAC1604257B . .

TY  - JOUR
AU  - Tasić, Nikola
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
AU  - Lačnjevac, Uroš
AU  - Ribić, Vesna
AU  - Žunić, Milan
AU  - Novaković, Tatjana
AU  - Podlogar, Matejka
AU  - Branković, Goran
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1003
AB  - In this paper, we propose a novel method for preparation of high surface area titania nanoparticles, and investigate their photovoltaic performance in dye sensitized solar cells (DSSCs). The precursor compound titanium(IV)-isopropoxide is hydrolyzed in the presence of nonionic surfactant (Triton X100) and ethylenediaminetetraacetic acid sodium salt (EDTA-Na-2) and thermally transformed into gel. The gel is autoclaved, resulting in submicronic micelles which are further processed into mesoporous films. The films are deposited from paste, composed of ultrasonically broken micelles and the organic ingredients. The crack-free film structures, composed of sub-25 nm pure anatase particles are observed using the appropriate instrumental techniques: scanning electron microscopy (SEM), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), UV-VIS-NIR spectroscopy. The large surface area of 158 m(2) g (1) and mesoporosity are confirmed using the data obtained from the nitrogen adsorption-desorption isotherm. The photovoltaic performance of the operating N719-sensitized solar devices are tested using electrochemical impedance spectroscopy (EIS), open-circuit voltage decay (OCVD) and by recording current density-voltage (J-V) curves. The cell exhibits promising photocurrent density up to 11.7 mA cm (2), and the photo-to-electric power efficiency of 5.22%, for cell area of 0.24 cm(2), under 100 mW cm (2) halogen light source.
PB  - Pergamon-Elsevier Science Ltd, Oxford
T2  - Electrochimica Acta
T1  - Mesoporous films prepared from synthesized TiO2 nanoparticles and their application in dye-sensitized solar cells (DSSCs)
EP  - 614
SP  - 606
VL  - 210
DO  - 10.1016/j.electacta.2016.05.179
ER  - 

@article{
author = "Tasić, Nikola and Marinković Stanojević, Zorica and Branković, Zorica and Lačnjevac, Uroš and Ribić, Vesna and Žunić, Milan and Novaković, Tatjana and Podlogar, Matejka and Branković, Goran",
year = "2016",
abstract = "In this paper, we propose a novel method for preparation of high surface area titania nanoparticles, and investigate their photovoltaic performance in dye sensitized solar cells (DSSCs). The precursor compound titanium(IV)-isopropoxide is hydrolyzed in the presence of nonionic surfactant (Triton X100) and ethylenediaminetetraacetic acid sodium salt (EDTA-Na-2) and thermally transformed into gel. The gel is autoclaved, resulting in submicronic micelles which are further processed into mesoporous films. The films are deposited from paste, composed of ultrasonically broken micelles and the organic ingredients. The crack-free film structures, composed of sub-25 nm pure anatase particles are observed using the appropriate instrumental techniques: scanning electron microscopy (SEM), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), UV-VIS-NIR spectroscopy. The large surface area of 158 m(2) g (1) and mesoporosity are confirmed using the data obtained from the nitrogen adsorption-desorption isotherm. The photovoltaic performance of the operating N719-sensitized solar devices are tested using electrochemical impedance spectroscopy (EIS), open-circuit voltage decay (OCVD) and by recording current density-voltage (J-V) curves. The cell exhibits promising photocurrent density up to 11.7 mA cm (2), and the photo-to-electric power efficiency of 5.22%, for cell area of 0.24 cm(2), under 100 mW cm (2) halogen light source.",
publisher = "Pergamon-Elsevier Science Ltd, Oxford",
journal = "Electrochimica Acta",
title = "Mesoporous films prepared from synthesized TiO2 nanoparticles and their application in dye-sensitized solar cells (DSSCs)",
pages = "614-606",
volume = "210",
doi = "10.1016/j.electacta.2016.05.179"
}

Tasić, N., Marinković Stanojević, Z., Branković, Z., Lačnjevac, U., Ribić, V., Žunić, M., Novaković, T., Podlogar, M.,& Branković, G.. (2016). Mesoporous films prepared from synthesized TiO2 nanoparticles and their application in dye-sensitized solar cells (DSSCs). in Electrochimica Acta
Pergamon-Elsevier Science Ltd, Oxford., 210, 606-614.
https://doi.org/10.1016/j.electacta.2016.05.179

Tasić N, Marinković Stanojević Z, Branković Z, Lačnjevac U, Ribić V, Žunić M, Novaković T, Podlogar M, Branković G. Mesoporous films prepared from synthesized TiO2 nanoparticles and their application in dye-sensitized solar cells (DSSCs). in Electrochimica Acta. 2016;210:606-614.
doi:10.1016/j.electacta.2016.05.179 .

Tasić, Nikola, Marinković Stanojević, Zorica, Branković, Zorica, Lačnjevac, Uroš, Ribić, Vesna, Žunić, Milan, Novaković, Tatjana, Podlogar, Matejka, Branković, Goran, "Mesoporous films prepared from synthesized TiO2 nanoparticles and their application in dye-sensitized solar cells (DSSCs)" in Electrochimica Acta, 210 (2016):606-614,
https://doi.org/10.1016/j.electacta.2016.05.179 . .

TY  - JOUR
AU  - Branković, Zorica
AU  - Branković, Goran
AU  - Počuča-Nešić, Milica
AU  - Marinković Stanojević, Zorica
AU  - Žunić, Milan
AU  - Luković Golić, Danijela
AU  - Tararam, R.
AU  - Cilense, Mario
AU  - Zaghete, M. A.
AU  - Jaglicic, Z.
AU  - Jagodic, M.
AU  - Varela, JA
PY  - 2015
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/881
AB  - In this work single phase hexagonal YMnO3 powders were prepared starting from Y(CH3COO)(3)center dot xH(2)O, Mn(CH3COO)(2)center dot 4H(2)O, KMnO4 and KOH using methods of conventional (280 degrees C for 6 h) or microwave assisted hydrothermal synthesis (200 degrees C for 2 h) followed by calcination at 1200 degrees C for 2 h. According to FESEM analysis the calcined powders consisted of submicronic YMnO3 particles, which were uniform in shape and size. Ceramic samples were obtained by sintering the as-synthesized powders at 1400 degrees C for 2 h. XRD analysis confirmed the presence of the single phase hexagonal YMnO3. SEM analysis showed a dense and homogeneous microstructure with typical inter- and intra-grain cracks. Magnetic measurements indicated ferrimagnetic properties that were explained by non-stoichiometry of the obtained compound and an excess of manganese that was confirmed by ICP analysis.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Hydrothermally assisted synthesis of YMnO3
EP  - 14298
IS  - 10
SP  - 14293
VL  - 41
DO  - 10.1016/j.ceramint.2015.07.060
ER  - 

@article{
author = "Branković, Zorica and Branković, Goran and Počuča-Nešić, Milica and Marinković Stanojević, Zorica and Žunić, Milan and Luković Golić, Danijela and Tararam, R. and Cilense, Mario and Zaghete, M. A. and Jaglicic, Z. and Jagodic, M. and Varela, JA",
year = "2015",
abstract = "In this work single phase hexagonal YMnO3 powders were prepared starting from Y(CH3COO)(3)center dot xH(2)O, Mn(CH3COO)(2)center dot 4H(2)O, KMnO4 and KOH using methods of conventional (280 degrees C for 6 h) or microwave assisted hydrothermal synthesis (200 degrees C for 2 h) followed by calcination at 1200 degrees C for 2 h. According to FESEM analysis the calcined powders consisted of submicronic YMnO3 particles, which were uniform in shape and size. Ceramic samples were obtained by sintering the as-synthesized powders at 1400 degrees C for 2 h. XRD analysis confirmed the presence of the single phase hexagonal YMnO3. SEM analysis showed a dense and homogeneous microstructure with typical inter- and intra-grain cracks. Magnetic measurements indicated ferrimagnetic properties that were explained by non-stoichiometry of the obtained compound and an excess of manganese that was confirmed by ICP analysis.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Hydrothermally assisted synthesis of YMnO3",
pages = "14298-14293",
number = "10",
volume = "41",
doi = "10.1016/j.ceramint.2015.07.060"
}

Branković, Z., Branković, G., Počuča-Nešić, M., Marinković Stanojević, Z., Žunić, M., Luković Golić, D., Tararam, R., Cilense, M., Zaghete, M. A., Jaglicic, Z., Jagodic, M.,& Varela, J.. (2015). Hydrothermally assisted synthesis of YMnO3. in Ceramics International
Elsevier Sci Ltd, Oxford., 41(10), 14293-14298.
https://doi.org/10.1016/j.ceramint.2015.07.060

Branković Z, Branković G, Počuča-Nešić M, Marinković Stanojević Z, Žunić M, Luković Golić D, Tararam R, Cilense M, Zaghete MA, Jaglicic Z, Jagodic M, Varela J. Hydrothermally assisted synthesis of YMnO3. in Ceramics International. 2015;41(10):14293-14298.
doi:10.1016/j.ceramint.2015.07.060 .

Branković, Zorica, Branković, Goran, Počuča-Nešić, Milica, Marinković Stanojević, Zorica, Žunić, Milan, Luković Golić, Danijela, Tararam, R., Cilense, Mario, Zaghete, M. A., Jaglicic, Z., Jagodic, M., Varela, JA, "Hydrothermally assisted synthesis of YMnO3" in Ceramics International, 41, no. 10 (2015):14293-14298,
https://doi.org/10.1016/j.ceramint.2015.07.060 . .

TY  - JOUR
AU  - Vuković, Marina
AU  - Branković, Goran
AU  - Marinković Stanojević, Zorica
AU  - Poleti, Dejan
AU  - Branković, Zorica
PY  - 2015
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/874
AB  - Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 degrees C for 1 h. An amount of 30 mass% of secondary phases and sintering temperature of 770 degrees C were found to be optimal for obtaining varistor with prominent properties. Achieved density was 97% of the theoretical value. Post-sintering phase composition included ZnO, gamma-Bi2O3 and pyrochlore-type with Zn2Bi3Sb3O14 nominal formula. Fine grained microstructure was accompanied with good phase distribution and excellent electrical characteristics: extraordinary high breakdown field of 3200 V mm(-1), high nonlinearity coefficients of 71 and 51 in 0.1-1 and 1-10 mA cm(-2) current density ranges, respectively, and low leakage current of 7.7 mu A cm(-2).
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors
EP  - 1814
IS  - 6
SP  - 1807
VL  - 35
DO  - 10.1016/j.jeurceramsoc.2014.12.015
ER  - 

@article{
author = "Vuković, Marina and Branković, Goran and Marinković Stanojević, Zorica and Poleti, Dejan and Branković, Zorica",
year = "2015",
abstract = "Previously synthesized nanocrystalline ZnO doped with cobalt and manganese, Bi2O3 and Sb2O3 were the precursors for high voltage varistors preparation. Varistor ceramics were sintered at 750 degrees C, 770 degrees C or 900 degrees C for 1 h. An amount of 30 mass% of secondary phases and sintering temperature of 770 degrees C were found to be optimal for obtaining varistor with prominent properties. Achieved density was 97% of the theoretical value. Post-sintering phase composition included ZnO, gamma-Bi2O3 and pyrochlore-type with Zn2Bi3Sb3O14 nominal formula. Fine grained microstructure was accompanied with good phase distribution and excellent electrical characteristics: extraordinary high breakdown field of 3200 V mm(-1), high nonlinearity coefficients of 71 and 51 in 0.1-1 and 1-10 mA cm(-2) current density ranges, respectively, and low leakage current of 7.7 mu A cm(-2).",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors",
pages = "1814-1807",
number = "6",
volume = "35",
doi = "10.1016/j.jeurceramsoc.2014.12.015"
}

Vuković, M., Branković, G., Marinković Stanojević, Z., Poleti, D.,& Branković, Z.. (2015). Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 35(6), 1807-1814.
https://doi.org/10.1016/j.jeurceramsoc.2014.12.015

Vuković M, Branković G, Marinković Stanojević Z, Poleti D, Branković Z. Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors. in Journal of the European Ceramic Society. 2015;35(6):1807-1814.
doi:10.1016/j.jeurceramsoc.2014.12.015 .

Vuković, Marina, Branković, Goran, Marinković Stanojević, Zorica, Poleti, Dejan, Branković, Zorica, "Ultra-high breakdown field varistors prepared from individually synthesized nanoprecursors" in Journal of the European Ceramic Society, 35, no. 6 (2015):1807-1814,
https://doi.org/10.1016/j.jeurceramsoc.2014.12.015 . .

TY  - JOUR
AU  - Počuča-Nešić, Milica
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
AU  - Cotic, P
AU  - Bernik, Slavko
AU  - Sousa, Goes M
AU  - Marinković, Bojan A
AU  - Varela, JA
AU  - Branković, Goran
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/737
AB  - Yttrium manganite (YMnO3) is a multiferroic material, which means that it exhibits both ferromagnetic and ferroelectric properties, so making it interesting for a variety of technological applications. In this work, single-phase YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 was formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time. During prolonged milling, the growth of the particles occurred. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. The X-ray powder-diffraction analysis indicates that the as-prepared samples crystallize with an orthorhombic (Pnma) YMnO3 structure. The morphology and chemical composition of the powder were investigated by SEM and FESEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of the milling time in a manner consistent with the variation in the nanocomposite microstructure.
PB  - Elsevier Science Sa, Lausanne
T2  - Journal of Alloys and Compounds
T1  - Mechanochemical synthesis of yttrium manganite
EP  - 456
SP  - 451
VL  - 552
DO  - 10.1016/j.jallcom.2012.11.031
ER  - 

@article{
author = "Počuča-Nešić, Milica and Marinković Stanojević, Zorica and Branković, Zorica and Cotic, P and Bernik, Slavko and Sousa, Goes M and Marinković, Bojan A and Varela, JA and Branković, Goran",
year = "2013",
abstract = "Yttrium manganite (YMnO3) is a multiferroic material, which means that it exhibits both ferromagnetic and ferroelectric properties, so making it interesting for a variety of technological applications. In this work, single-phase YMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. The YMnO3 was formed directly from the highly activated constituent oxides, Y2O3 and Mn2O3, after 60 min of milling time. During prolonged milling, the growth of the particles occurred. The cumulative energy introduced into the system during milling for 60 min was 86 kJ/g. The X-ray powder-diffraction analysis indicates that the as-prepared samples crystallize with an orthorhombic (Pnma) YMnO3 structure. The morphology and chemical composition of the powder were investigated by SEM and FESEM. The magnetic properties of the obtained YMnO3 powders were found to change as a function of the milling time in a manner consistent with the variation in the nanocomposite microstructure.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Journal of Alloys and Compounds",
title = "Mechanochemical synthesis of yttrium manganite",
pages = "456-451",
volume = "552",
doi = "10.1016/j.jallcom.2012.11.031"
}

Počuča-Nešić, M., Marinković Stanojević, Z., Branković, Z., Cotic, P., Bernik, S., Sousa, G. M., Marinković, B. A., Varela, J.,& Branković, G.. (2013). Mechanochemical synthesis of yttrium manganite. in Journal of Alloys and Compounds
Elsevier Science Sa, Lausanne., 552, 451-456.
https://doi.org/10.1016/j.jallcom.2012.11.031

Počuča-Nešić M, Marinković Stanojević Z, Branković Z, Cotic P, Bernik S, Sousa GM, Marinković BA, Varela J, Branković G. Mechanochemical synthesis of yttrium manganite. in Journal of Alloys and Compounds. 2013;552:451-456.
doi:10.1016/j.jallcom.2012.11.031 .

Počuča-Nešić, Milica, Marinković Stanojević, Zorica, Branković, Zorica, Cotic, P, Bernik, Slavko, Sousa, Goes M, Marinković, Bojan A, Varela, JA, Branković, Goran, "Mechanochemical synthesis of yttrium manganite" in Journal of Alloys and Compounds, 552 (2013):451-456,
https://doi.org/10.1016/j.jallcom.2012.11.031 . .

TY  - JOUR
AU  - Aleksić, Obrad
AU  - Vasiljević, Zorka Z
AU  - Nikolić, Maria Vesna
AU  - Tasić, Nikola
AU  - Vuković, Marina
AU  - Marinković Stanojević, Zorica
AU  - Nikolić, Nenad
AU  - Nikolić, Pantelija M.
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/711
AB  - Nanostructured single layered (pure TiO2, pure alpha-Fe2O3 and mixed Fe2O3/TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 degrees C and sintered at 650 degrees C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3/TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
EP  - 134
IS  - 3
SP  - 129
VL  - 7
DO  - 10.2298/PAC1303129A
ER  - 

@article{
author = "Aleksić, Obrad and Vasiljević, Zorka Z and Nikolić, Maria Vesna and Tasić, Nikola and Vuković, Marina and Marinković Stanojević, Zorica and Nikolić, Nenad and Nikolić, Pantelija M.",
year = "2013",
abstract = "Nanostructured single layered (pure TiO2, pure alpha-Fe2O3 and mixed Fe2O3/TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 degrees C and sintered at 650 degrees C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3/TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Nanostructured Fe2O3/TiO2 thick films prepared by screen printing",
pages = "134-129",
number = "3",
volume = "7",
doi = "10.2298/PAC1303129A"
}

Aleksić, O., Vasiljević, Z. Z., Nikolić, M. V., Tasić, N., Vuković, M., Marinković Stanojević, Z., Nikolić, N.,& Nikolić, P. M.. (2013). Nanostructured Fe2O3/TiO2 thick films prepared by screen printing. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 7(3), 129-134.
https://doi.org/10.2298/PAC1303129A

Aleksić O, Vasiljević ZZ, Nikolić MV, Tasić N, Vuković M, Marinković Stanojević Z, Nikolić N, Nikolić PM. Nanostructured Fe2O3/TiO2 thick films prepared by screen printing. in Processing and Application of Ceramics. 2013;7(3):129-134.
doi:10.2298/PAC1303129A .

Aleksić, Obrad, Vasiljević, Zorka Z, Nikolić, Maria Vesna, Tasić, Nikola, Vuković, Marina, Marinković Stanojević, Zorica, Nikolić, Nenad, Nikolić, Pantelija M., "Nanostructured Fe2O3/TiO2 thick films prepared by screen printing" in Processing and Application of Ceramics, 7, no. 3 (2013):129-134,
https://doi.org/10.2298/PAC1303129A . .

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija T
AU  - Srećković, Tatjana
AU  - Stojanović, Biljana D
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/687
AB  - A powder mixture of Bi2O3 and Fe2O3 was mechanically treated in a planetary ball mill in an air from 30 to 720 minutes. It was shown that the mechanochemical formation of BiFeO3 (BFO) phase was initiated after 60 min and its amount increased gradually with increasing milling time. A detailed XRPD structural analysis is realized by Rietveld's structure refinement method. The resulting lattice parameters, relative phase abundances, crystallite sizes and crystal lattice microstrains were determined as a function of milling time. Microstructural analysis showed a little difference in morphology of obtained powders. The primary particles, irregular in shape and smaller than 400 nm are observed clearly, although they have assembled together to form agglomerates with varying size and morphology. Dense BFO ceramics were prepared by conventional solid-state reaction at the temperature of 810oC for 1h followed immediately by quenching process.
PB  - Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd
T2  - Journal of Mining and Metallurgy B: Metallurgy
T1  - Mechanochemical synthesis of bismuth ferrite
EP  - 31
IS  - 1
SP  - 27
VL  - 49
DO  - 10.2298/JMMB120430039M
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Mančić, Lidija T and Srećković, Tatjana and Stojanović, Biljana D",
year = "2013",
abstract = "A powder mixture of Bi2O3 and Fe2O3 was mechanically treated in a planetary ball mill in an air from 30 to 720 minutes. It was shown that the mechanochemical formation of BiFeO3 (BFO) phase was initiated after 60 min and its amount increased gradually with increasing milling time. A detailed XRPD structural analysis is realized by Rietveld's structure refinement method. The resulting lattice parameters, relative phase abundances, crystallite sizes and crystal lattice microstrains were determined as a function of milling time. Microstructural analysis showed a little difference in morphology of obtained powders. The primary particles, irregular in shape and smaller than 400 nm are observed clearly, although they have assembled together to form agglomerates with varying size and morphology. Dense BFO ceramics were prepared by conventional solid-state reaction at the temperature of 810oC for 1h followed immediately by quenching process.",
publisher = "Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd",
journal = "Journal of Mining and Metallurgy B: Metallurgy",
title = "Mechanochemical synthesis of bismuth ferrite",
pages = "31-27",
number = "1",
volume = "49",
doi = "10.2298/JMMB120430039M"
}

Marinković Stanojević, Z., Mančić, L. T., Srećković, T.,& Stojanović, B. D.. (2013). Mechanochemical synthesis of bismuth ferrite. in Journal of Mining and Metallurgy B: Metallurgy
Univerzitet u Beogradu - Tehnički fakultet u Boru, Beograd., 49(1), 27-31.
https://doi.org/10.2298/JMMB120430039M

Marinković Stanojević Z, Mančić LT, Srećković T, Stojanović BD. Mechanochemical synthesis of bismuth ferrite. in Journal of Mining and Metallurgy B: Metallurgy. 2013;49(1):27-31.
doi:10.2298/JMMB120430039M .

Marinković Stanojević, Zorica, Mančić, Lidija T, Srećković, Tatjana, Stojanović, Biljana D, "Mechanochemical synthesis of bismuth ferrite" in Journal of Mining and Metallurgy B: Metallurgy, 49, no. 1 (2013):27-31,
https://doi.org/10.2298/JMMB120430039M . .

TY  - JOUR
AU  - Tasić, Nikola
AU  - Branković, Zorica
AU  - Marinković Stanojević, Zorica
AU  - Branković, Goran
PY  - 2012
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/567
AB  - Titanium(IV) oxide in the form of anatase has proven to be the best choice for photoanodic material in dye-sensitized solar cells (DSCs). The aim of the work was to study the influence of binder molecular weight on the morphology of deposited films, and consequently, DSC parameters. For this study, five different TiO2 tape casting slips were prepared from commercially available nanoanatase powder and polyethylene glycol (PEG) as a binder. The process of drying and sintering was carefully designed, so that the organic template was slowly decomposed, leaving favorable crack-free, porous structure. It was found that there is an optimal region of binder molecular weight for obtaining homogeneous, non-agglomerated and porous microstructure which is a necessary condition for application of TiO2 films in DSCs.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Effect of Binder Molecular Weight on Morphology of TiO2 Films Prepared by Tape Casting and Their Photovoltaic Performance
EP  - 372
IS  - 3
SP  - 365
VL  - 44
DO  - 10.2298/SOS1203365T
ER  - 

@article{
author = "Tasić, Nikola and Branković, Zorica and Marinković Stanojević, Zorica and Branković, Goran",
year = "2012",
abstract = "Titanium(IV) oxide in the form of anatase has proven to be the best choice for photoanodic material in dye-sensitized solar cells (DSCs). The aim of the work was to study the influence of binder molecular weight on the morphology of deposited films, and consequently, DSC parameters. For this study, five different TiO2 tape casting slips were prepared from commercially available nanoanatase powder and polyethylene glycol (PEG) as a binder. The process of drying and sintering was carefully designed, so that the organic template was slowly decomposed, leaving favorable crack-free, porous structure. It was found that there is an optimal region of binder molecular weight for obtaining homogeneous, non-agglomerated and porous microstructure which is a necessary condition for application of TiO2 films in DSCs.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Effect of Binder Molecular Weight on Morphology of TiO2 Films Prepared by Tape Casting and Their Photovoltaic Performance",
pages = "372-365",
number = "3",
volume = "44",
doi = "10.2298/SOS1203365T"
}

Tasić, N., Branković, Z., Marinković Stanojević, Z.,& Branković, G.. (2012). Effect of Binder Molecular Weight on Morphology of TiO2 Films Prepared by Tape Casting and Their Photovoltaic Performance. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 44(3), 365-372.
https://doi.org/10.2298/SOS1203365T

Tasić N, Branković Z, Marinković Stanojević Z, Branković G. Effect of Binder Molecular Weight on Morphology of TiO2 Films Prepared by Tape Casting and Their Photovoltaic Performance. in Science of Sintering. 2012;44(3):365-372.
doi:10.2298/SOS1203365T .

Tasić, Nikola, Branković, Zorica, Marinković Stanojević, Zorica, Branković, Goran, "Effect of Binder Molecular Weight on Morphology of TiO2 Films Prepared by Tape Casting and Their Photovoltaic Performance" in Science of Sintering, 44, no. 3 (2012):365-372,
https://doi.org/10.2298/SOS1203365T . .

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Branković, Zorica
AU  - Jaglicic, Zvonko
AU  - Jagodic, M
AU  - Mančić, Lidija T
AU  - Bernik, Slavko
AU  - Recnik, Aleksander
AU  - Branković, Goran
PY  - 2011
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/463
AB  - We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T (C) similar to 66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.
PB  - Springer, Dordrecht
T2  - Journal of Nanoparticle Research
T1  - Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis
EP  - 3439
IS  - 8
SP  - 3431
VL  - 13
DO  - 10.1007/s11051-011-0265-7
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Branković, Zorica and Jaglicic, Zvonko and Jagodic, M and Mančić, Lidija T and Bernik, Slavko and Recnik, Aleksander and Branković, Goran",
year = "2011",
abstract = "We have studied the formation of BiMnO3 (BMO) nanocrystalline perovskite powder produced by high-energy milling of the constituent oxides. The crystal structure and the amount of crystalline and amorphous phases in the powder as a function of the milling time were determined with XRPD using Rietveld refinement. BMO perovskite formed directly from highly activated nano-sized constituent oxides after 240 min of milling and subsequently grew during prolonged milling. The morphology, structure, and chemical composition of the powder were investigated by SEM and TEM. A clear ferromagnetic transition was observed at T (C) similar to 66 K for a sample milled for 240 min and increased with milling time. The magnetic hysteresis behavior is similar to that of a soft ferromagnet. The magnetic properties of the obtained BMO powders were found to change as a function of milling time in a manner consistent with variations in the nanocomposite microstructure.",
publisher = "Springer, Dordrecht",
journal = "Journal of Nanoparticle Research",
title = "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis",
pages = "3439-3431",
number = "8",
volume = "13",
doi = "10.1007/s11051-011-0265-7"
}

Marinković Stanojević, Z., Branković, Z., Jaglicic, Z., Jagodic, M., Mančić, L. T., Bernik, S., Recnik, A.,& Branković, G.. (2011). Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research
Springer, Dordrecht., 13(8), 3431-3439.
https://doi.org/10.1007/s11051-011-0265-7

Marinković Stanojević Z, Branković Z, Jaglicic Z, Jagodic M, Mančić LT, Bernik S, Recnik A, Branković G. Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis. in Journal of Nanoparticle Research. 2011;13(8):3431-3439.
doi:10.1007/s11051-011-0265-7 .

Marinković Stanojević, Zorica, Branković, Zorica, Jaglicic, Zvonko, Jagodic, M, Mančić, Lidija T, Bernik, Slavko, Recnik, Aleksander, Branković, Goran, "Structural and magnetic properties of nanocrystalline bismuth manganite obtained by mechanochemical synthesis" in Journal of Nanoparticle Research, 13, no. 8 (2011):3431-3439,
https://doi.org/10.1007/s11051-011-0265-7 . .

TY  - JOUR
AU  - Branković, Zorica
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija T
AU  - Vukotić, Vesna M
AU  - Bernik, Slavko
AU  - Branković, Goran
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/412
AB  - Multiferroic bismuth manganite (BiMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. Unfortunately, preparation of BiMnO3 is not possible by a conventional solid-state reaction and it can form only from mixture of oxides at high pressures (>40 kbar). In this work single-phased BiMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. A mixture of Bi2O3 and Mn2O3 was intensively milled in air atmosphere, using stainless steel vials and balls. According to analysis of XPRD results BiMnO3 obtained after milling for 240 min has a tetragonal structure with lattice parameters a = 3.9230 angstrom, c = 3.920 angstrom and a crystallite size of 16.8 nm. The cumulative energy introduced into the system during milling for 240 min was 401 kJ/g. It was found that the obtained powders were agglomerated. Corresponding agglomeration factors were calculated from the results of BET and particle size distribution analysis.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Multiferroic bismuth manganite prepared by mechanochemical synthesis
EP  - 281
IS  - 2
SP  - 277
VL  - 30
DO  - 10.1016/j.jeurceramsoc.2009.06.030
ER  - 

@article{
author = "Branković, Zorica and Marinković Stanojević, Zorica and Mančić, Lidija T and Vukotić, Vesna M and Bernik, Slavko and Branković, Goran",
year = "2010",
abstract = "Multiferroic bismuth manganite (BiMnO3) is known as a material that exhibits both ferromagnetic and ferroelectric properties making it interesting for various technological applications. Unfortunately, preparation of BiMnO3 is not possible by a conventional solid-state reaction and it can form only from mixture of oxides at high pressures (>40 kbar). In this work single-phased BiMnO3 was prepared for the first time by mechanochemical synthesis in a planetary ball mill. A mixture of Bi2O3 and Mn2O3 was intensively milled in air atmosphere, using stainless steel vials and balls. According to analysis of XPRD results BiMnO3 obtained after milling for 240 min has a tetragonal structure with lattice parameters a = 3.9230 angstrom, c = 3.920 angstrom and a crystallite size of 16.8 nm. The cumulative energy introduced into the system during milling for 240 min was 401 kJ/g. It was found that the obtained powders were agglomerated. Corresponding agglomeration factors were calculated from the results of BET and particle size distribution analysis.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Multiferroic bismuth manganite prepared by mechanochemical synthesis",
pages = "281-277",
number = "2",
volume = "30",
doi = "10.1016/j.jeurceramsoc.2009.06.030"
}

Branković, Z., Marinković Stanojević, Z., Mančić, L. T., Vukotić, V. M., Bernik, S.,& Branković, G.. (2010). Multiferroic bismuth manganite prepared by mechanochemical synthesis. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 30(2), 277-281.
https://doi.org/10.1016/j.jeurceramsoc.2009.06.030

Branković Z, Marinković Stanojević Z, Mančić LT, Vukotić VM, Bernik S, Branković G. Multiferroic bismuth manganite prepared by mechanochemical synthesis. in Journal of the European Ceramic Society. 2010;30(2):277-281.
doi:10.1016/j.jeurceramsoc.2009.06.030 .

Branković, Zorica, Marinković Stanojević, Zorica, Mančić, Lidija T, Vukotić, Vesna M, Bernik, Slavko, Branković, Goran, "Multiferroic bismuth manganite prepared by mechanochemical synthesis" in Journal of the European Ceramic Society, 30, no. 2 (2010):277-281,
https://doi.org/10.1016/j.jeurceramsoc.2009.06.030 . .

TY  - JOUR
AU  - Pavlović, V. P.
AU  - Stojanović, Biljana D
AU  - Pavlović, Vladimir B
AU  - Marinković Stanojević, Zorica
AU  - Živković, Lj.
AU  - Ristic, M. M.
PY  - 2008
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/286
AB  - In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200 degrees C. The eject of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system
EP  - 26
IS  - 1
SP  - 21
VL  - 40
DO  - 10.2298/SOS0801021P
ER  - 

@article{
author = "Pavlović, V. P. and Stojanović, Biljana D and Pavlović, Vladimir B and Marinković Stanojević, Zorica and Živković, Lj. and Ristic, M. M.",
year = "2008",
abstract = "In this article the solid state reaction of BaTiO3 formation from a mechanically activated BaCO3-TiO2 system has been investigated. An equimolar mixture of BaCO3 and TiO2 powders was activated in a planetary ball mill in a continual regime for 0, 30 and 90 min, pressed and thermally treated up to 1200 degrees C. The eject of the milling and firing regime on the phase formation was investigated by the X-ray diffraction (XRD) method and differential thermal analysis (DTA). Deconvolution of the experimental DTA curve corresponding to the BaTiO3 synthesis process has been performed. The influence of the activation time on the change of characteristic temperature for each elementary step in the complete solid-state reaction of BaTiO3 formation, was analyzed. These results were correlated with the ones obtained by SEM characterization and by XRD analysis.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system",
pages = "26-21",
number = "1",
volume = "40",
doi = "10.2298/SOS0801021P"
}

Pavlović, V. P., Stojanović, B. D., Pavlović, V. B., Marinković Stanojević, Z., Živković, Lj.,& Ristic, M. M.. (2008). Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 40(1), 21-26.
https://doi.org/10.2298/SOS0801021P

Pavlović VP, Stojanović BD, Pavlović VB, Marinković Stanojević Z, Živković L, Ristic MM. Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system. in Science of Sintering. 2008;40(1):21-26.
doi:10.2298/SOS0801021P .

Pavlović, V. P., Stojanović, Biljana D, Pavlović, Vladimir B, Marinković Stanojević, Zorica, Živković, Lj., Ristic, M. M., "Synthesis of BaTiO3 from a mechanically activated BaCO3-TiO2 system" in Science of Sintering, 40, no. 1 (2008):21-26,
https://doi.org/10.2298/SOS0801021P . .

TY  - JOUR
AU  - Mančić, Lidija T
AU  - Del, Rosario, G.
AU  - Marinković Stanojević, Zorica
AU  - Milošević, Olivera
PY  - 2007
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/200
AB  - The common nitrates precursor solution leading to the Y3Al5O12:Ce3+ (YAG:Ce) composition with 2 at.% of cerium, is ultrasonically atomised and introduced into the tubular flow reactor at 320 degrees C. Having in mind that extremely high heating rates and short residence time are associated with spray pyrolysis, the low temperature regime is used for aerosol decomposition for the production of segregation-free precursor powder that is additionally heated at 900 and 1000 degrees C (2-6h) for the purpose to determine the phase evolution. Formation of uniform and submicron-sized spherical particles with nano-clustered inner structure is proved by different analysing techniques (X-ray powder diffraction, scanning electron microscopy and energy dispersive spectroscopy). The effect of processing parameters and post-annealing treatment is discussed from the viewpoint of the targeted garnet phase formation.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Phase evolution in Ce-doped yttrium-aluminum-based particles derived from aerosol
EP  - 4332
IS  - 13-15
SP  - 4329
VL  - 27
DO  - 10.1016/j.jeurceramsoc.2007.02.153
ER  - 

@article{
author = "Mančić, Lidija T and Del, Rosario, G. and Marinković Stanojević, Zorica and Milošević, Olivera",
year = "2007",
abstract = "The common nitrates precursor solution leading to the Y3Al5O12:Ce3+ (YAG:Ce) composition with 2 at.% of cerium, is ultrasonically atomised and introduced into the tubular flow reactor at 320 degrees C. Having in mind that extremely high heating rates and short residence time are associated with spray pyrolysis, the low temperature regime is used for aerosol decomposition for the production of segregation-free precursor powder that is additionally heated at 900 and 1000 degrees C (2-6h) for the purpose to determine the phase evolution. Formation of uniform and submicron-sized spherical particles with nano-clustered inner structure is proved by different analysing techniques (X-ray powder diffraction, scanning electron microscopy and energy dispersive spectroscopy). The effect of processing parameters and post-annealing treatment is discussed from the viewpoint of the targeted garnet phase formation.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Phase evolution in Ce-doped yttrium-aluminum-based particles derived from aerosol",
pages = "4332-4329",
number = "13-15",
volume = "27",
doi = "10.1016/j.jeurceramsoc.2007.02.153"
}

Mančić, L. T., Del, R. G., Marinković Stanojević, Z.,& Milošević, O.. (2007). Phase evolution in Ce-doped yttrium-aluminum-based particles derived from aerosol. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 27(13-15), 4329-4332.
https://doi.org/10.1016/j.jeurceramsoc.2007.02.153

Mančić LT, Del RG, Marinković Stanojević Z, Milošević O. Phase evolution in Ce-doped yttrium-aluminum-based particles derived from aerosol. in Journal of the European Ceramic Society. 2007;27(13-15):4329-4332.
doi:10.1016/j.jeurceramsoc.2007.02.153 .

Mančić, Lidija T, Del, Rosario, G., Marinković Stanojević, Zorica, Milošević, Olivera, "Phase evolution in Ce-doped yttrium-aluminum-based particles derived from aerosol" in Journal of the European Ceramic Society, 27, no. 13-15 (2007):4329-4332,
https://doi.org/10.1016/j.jeurceramsoc.2007.02.153 . .

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Romčević, Nebojša
AU  - Stojanović, Biljana D
PY  - 2007
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/224
AB  - A mixture of starting ZnO and Cr2O3 powders in equimolar quantities was mechanically activated by grinding using a high energy vibro-mil I for 0, 40 and 80 min. The spinet ZnCr2O4 was prepared from activated mixtures by a conventional solid-state reaction at the temperature of 900 degrees C during 240 min. Raman scattering (RS) and Far-infrared (IR) spectroscopy were applied to study the local structure of zinc chromium oxide spinels. We report on an analysis of the vibrational spectra of the spinet ZnCr2O4 structure using both the classical factor-group theory (O-h(7) spectroscopic symmetry) and a local environmental model. The structural modifications were studied on the basis of vibrations of ZnO4 tetrahedral and CrO6 octahedral units building the crystal lattice. The RS and IR line intensities and positions remained in good agreement with the Fd3m space group. The broadness of IR and Raman bands and the fact that more vibration modes than expected were observed, may be attributed to certain disorder in the crystal symmetry of cubic spinet ZnCr2O4. Formation of the defect spinel structure can be assigned to mechanical activation of the starting oxide mixture.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Spectroscopic study of spinel ZnCr2O4 obtained from mechanically activated ZnO-Cr2O3 mixtures
EP  - 907
IS  - 2-3
SP  - 903
VL  - 27
DO  - 10.1016/j.jeurceramsoc.2006.04.057
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Romčević, Nebojša and Stojanović, Biljana D",
year = "2007",
abstract = "A mixture of starting ZnO and Cr2O3 powders in equimolar quantities was mechanically activated by grinding using a high energy vibro-mil I for 0, 40 and 80 min. The spinet ZnCr2O4 was prepared from activated mixtures by a conventional solid-state reaction at the temperature of 900 degrees C during 240 min. Raman scattering (RS) and Far-infrared (IR) spectroscopy were applied to study the local structure of zinc chromium oxide spinels. We report on an analysis of the vibrational spectra of the spinet ZnCr2O4 structure using both the classical factor-group theory (O-h(7) spectroscopic symmetry) and a local environmental model. The structural modifications were studied on the basis of vibrations of ZnO4 tetrahedral and CrO6 octahedral units building the crystal lattice. The RS and IR line intensities and positions remained in good agreement with the Fd3m space group. The broadness of IR and Raman bands and the fact that more vibration modes than expected were observed, may be attributed to certain disorder in the crystal symmetry of cubic spinet ZnCr2O4. Formation of the defect spinel structure can be assigned to mechanical activation of the starting oxide mixture.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Spectroscopic study of spinel ZnCr2O4 obtained from mechanically activated ZnO-Cr2O3 mixtures",
pages = "907-903",
number = "2-3",
volume = "27",
doi = "10.1016/j.jeurceramsoc.2006.04.057"
}

Marinković Stanojević, Z., Romčević, N.,& Stojanović, B. D.. (2007). Spectroscopic study of spinel ZnCr2O4 obtained from mechanically activated ZnO-Cr2O3 mixtures. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 27(2-3), 903-907.
https://doi.org/10.1016/j.jeurceramsoc.2006.04.057

Marinković Stanojević Z, Romčević N, Stojanović BD. Spectroscopic study of spinel ZnCr2O4 obtained from mechanically activated ZnO-Cr2O3 mixtures. in Journal of the European Ceramic Society. 2007;27(2-3):903-907.
doi:10.1016/j.jeurceramsoc.2006.04.057 .

Marinković Stanojević, Zorica, Romčević, Nebojša, Stojanović, Biljana D, "Spectroscopic study of spinel ZnCr2O4 obtained from mechanically activated ZnO-Cr2O3 mixtures" in Journal of the European Ceramic Society, 27, no. 2-3 (2007):903-907,
https://doi.org/10.1016/j.jeurceramsoc.2006.04.057 . .

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija T
AU  - Vulić, Predrag
AU  - Milošević, Olivera
PY  - 2005
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/113
AB  - An equimolar mixtures of starting ZnO and Cr2O3 powders were mechanically activated by grinding using a planetary ball mill for various periods of time (40-320min). Formation of nanocrystalline ZnCr2O4 as normal spine] structure at room temperature is detected in all samples-after ball-milling. A detailed XRD structural analysis (the relative phase abundances of different phases, lattice parameter changes, site occupancy, the average primary crystallite sizes, crystal lattice microstrains) is realized by the pattern decomposition technique, performed in accordance with the procedure based on Rietveld software KOALARIET-XFIT. Due to the importance of cation distribution on the chemical and physical properties of spinels, a study of site occupation factors of ZnCr2O4 spinels has been undertaken. The calculation based on the atomistic methods for the description of the perfect and defect spinel ZnCr2O4 crystal lattice is applied and the presence of the individual structural defects is determined.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - Microstructural characterization of mechanically activated ZnO-Cr2O3 system
EP  - 2084
IS  - 12
SP  - 2081
VL  - 25
DO  - 10.1016/j.jeurceramsoc.2005.03.085
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Mančić, Lidija T and Vulić, Predrag and Milošević, Olivera",
year = "2005",
abstract = "An equimolar mixtures of starting ZnO and Cr2O3 powders were mechanically activated by grinding using a planetary ball mill for various periods of time (40-320min). Formation of nanocrystalline ZnCr2O4 as normal spine] structure at room temperature is detected in all samples-after ball-milling. A detailed XRD structural analysis (the relative phase abundances of different phases, lattice parameter changes, site occupancy, the average primary crystallite sizes, crystal lattice microstrains) is realized by the pattern decomposition technique, performed in accordance with the procedure based on Rietveld software KOALARIET-XFIT. Due to the importance of cation distribution on the chemical and physical properties of spinels, a study of site occupation factors of ZnCr2O4 spinels has been undertaken. The calculation based on the atomistic methods for the description of the perfect and defect spinel ZnCr2O4 crystal lattice is applied and the presence of the individual structural defects is determined.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "Microstructural characterization of mechanically activated ZnO-Cr2O3 system",
pages = "2084-2081",
number = "12",
volume = "25",
doi = "10.1016/j.jeurceramsoc.2005.03.085"
}

Marinković Stanojević, Z., Mančić, L. T., Vulić, P.,& Milošević, O.. (2005). Microstructural characterization of mechanically activated ZnO-Cr2O3 system. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 25(12), 2081-2084.
https://doi.org/10.1016/j.jeurceramsoc.2005.03.085

Marinković Stanojević Z, Mančić LT, Vulić P, Milošević O. Microstructural characterization of mechanically activated ZnO-Cr2O3 system. in Journal of the European Ceramic Society. 2005;25(12):2081-2084.
doi:10.1016/j.jeurceramsoc.2005.03.085 .

Marinković Stanojević, Zorica, Mančić, Lidija T, Vulić, Predrag, Milošević, Olivera, "Microstructural characterization of mechanically activated ZnO-Cr2O3 system" in Journal of the European Ceramic Society, 25, no. 12 (2005):2081-2084,
https://doi.org/10.1016/j.jeurceramsoc.2005.03.085 . .

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija T
AU  - Vulić, P.
AU  - Milošević, Olivera
PY  - 2004
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/110
AB  - Mixtures of starting ZnO and Cr2O3 powders in equimolar quantities were mechanically activated by grinding using a high energy vibro-mill for 0, 40 and 80 minutes. Qualitative X-ray diffraction analysis made after sintering at 900degreesC for 240 min showed the presence of a well-crystallized spinel-type phase, ZnCr2O4, in all examined samples. A detailed structural analysis of lattice parameters, average primary crystallite sizes, and crystal lattice microstrains was made by the pattern decomposition technique, performed in accordance with the procedure based on the KOALARIET-XFIT program. Due to importance of cation distributions for the chemical and physical properties of spinels, a study of site occupation factors of ZnCr2O4 spinels, i.e. changes in the stoichiometry, was conducted. Calculations based on atomistic methods for the simulation and description of perfect and defect spinel ZnCr2O4 crystal lattices were made, and the presence of individual structural defects was determined.
PB  - Trans Tech Publications Ltd
T2  - Materials Science Forum
T1  - The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system
EP  - 428
SP  - 423
VL  - 453-454
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_110
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Mančić, Lidija T and Vulić, P. and Milošević, Olivera",
year = "2004",
abstract = "Mixtures of starting ZnO and Cr2O3 powders in equimolar quantities were mechanically activated by grinding using a high energy vibro-mill for 0, 40 and 80 minutes. Qualitative X-ray diffraction analysis made after sintering at 900degreesC for 240 min showed the presence of a well-crystallized spinel-type phase, ZnCr2O4, in all examined samples. A detailed structural analysis of lattice parameters, average primary crystallite sizes, and crystal lattice microstrains was made by the pattern decomposition technique, performed in accordance with the procedure based on the KOALARIET-XFIT program. Due to importance of cation distributions for the chemical and physical properties of spinels, a study of site occupation factors of ZnCr2O4 spinels, i.e. changes in the stoichiometry, was conducted. Calculations based on atomistic methods for the simulation and description of perfect and defect spinel ZnCr2O4 crystal lattices were made, and the presence of individual structural defects was determined.",
publisher = "Trans Tech Publications Ltd",
journal = "Materials Science Forum",
title = "The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system",
pages = "428-423",
volume = "453-454",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_110"
}

Marinković Stanojević, Z., Mančić, L. T., Vulić, P.,& Milošević, O.. (2004). The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system. in Materials Science Forum
Trans Tech Publications Ltd., 453-454, 423-428.
https://hdl.handle.net/21.15107/rcub_rimsi_110

Marinković Stanojević Z, Mančić LT, Vulić P, Milošević O. The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system. in Materials Science Forum. 2004;453-454:423-428.
https://hdl.handle.net/21.15107/rcub_rimsi_110 .

Marinković Stanojević, Zorica, Mančić, Lidija T, Vulić, P., Milošević, Olivera, "The influence of mechanical activation on the stoichiometry and defect structure of a sintered ZnO-Cr2O3 system" in Materials Science Forum, 453-454 (2004):423-428,
https://hdl.handle.net/21.15107/rcub_rimsi_110 .

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija T
AU  - Milošević, Olivera
PY  - 2004
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/108
AB  - The nature of exothermal and irreversible structural changes observed during linear heating of nanocrystalline ZnO powders was investigated using differential scanning calorimetry, X ray, SEM and TEM analysis. Nanocrystalline ZnO powders were obtained by ultrasonic spray pyrolysis of 0.8 mol/dm(3) zinc nitrate solution and subsequent decomposition of 2.7 mum sized droplets in the temperature range up to 600 degreesC, F-air = 1.2 dm(3)/min. Produced particles are characterized by uniform and submicronic size, BET = 4.94 m(2)/g, high phase purity and granular or circular "open" surface as the consequence of primary crystallites presence with average size of d = 20 nm. The observed quasi nucleation-growth process during heating of this powder was discussed in the terms of primary crystallites structural changes.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of the European Ceramic Society
T1  - The nature of structural changes in nanocrystalline ZnO powders under linear heating conditions
EP  - 1933
IS  - 6
SP  - 1929
VL  - 24
DO  - 10.1016/S0955-2219(03)00523-5
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Mančić, Lidija T and Milošević, Olivera",
year = "2004",
abstract = "The nature of exothermal and irreversible structural changes observed during linear heating of nanocrystalline ZnO powders was investigated using differential scanning calorimetry, X ray, SEM and TEM analysis. Nanocrystalline ZnO powders were obtained by ultrasonic spray pyrolysis of 0.8 mol/dm(3) zinc nitrate solution and subsequent decomposition of 2.7 mum sized droplets in the temperature range up to 600 degreesC, F-air = 1.2 dm(3)/min. Produced particles are characterized by uniform and submicronic size, BET = 4.94 m(2)/g, high phase purity and granular or circular "open" surface as the consequence of primary crystallites presence with average size of d = 20 nm. The observed quasi nucleation-growth process during heating of this powder was discussed in the terms of primary crystallites structural changes.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of the European Ceramic Society",
title = "The nature of structural changes in nanocrystalline ZnO powders under linear heating conditions",
pages = "1933-1929",
number = "6",
volume = "24",
doi = "10.1016/S0955-2219(03)00523-5"
}

Marinković Stanojević, Z., Mančić, L. T.,& Milošević, O.. (2004). The nature of structural changes in nanocrystalline ZnO powders under linear heating conditions. in Journal of the European Ceramic Society
Elsevier Sci Ltd, Oxford., 24(6), 1929-1933.
https://doi.org/10.1016/S0955-2219(03)00523-5

Marinković Stanojević Z, Mančić LT, Milošević O. The nature of structural changes in nanocrystalline ZnO powders under linear heating conditions. in Journal of the European Ceramic Society. 2004;24(6):1929-1933.
doi:10.1016/S0955-2219(03)00523-5 .

Marinković Stanojević, Zorica, Mančić, Lidija T, Milošević, Olivera, "The nature of structural changes in nanocrystalline ZnO powders under linear heating conditions" in Journal of the European Ceramic Society, 24, no. 6 (2004):1929-1933,
https://doi.org/10.1016/S0955-2219(03)00523-5 . .

TY  - JOUR
AU  - Marinković Stanojević, Zorica
AU  - Mančić, Lidija T
AU  - Cribier, JF
AU  - Ohara, S
AU  - Fukui, T
AU  - Milošević, Olivera
PY  - 2004
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/107
AB  - Nanocomposite powders in the system (La1-xSx)(a)MnO3-YSZ((1-y)) [LSM-YSZ], as an attractive cathode material for high operating solid oxide fuel cell (SOFC), were obtained through ultrasonic spray pyrolysis (1.7 MHz) method. The principle of the synthesis is based on a single-step high temperature aerosol decomposition of atomized precursor solutions composed from yttria stabilized ZrO2 sol (average particle size similar to 60 nm) and corresponding aqueous nitrate and hydrogen peroxide solutions of La, Sr and Mn. Two starting systems were examined: (a) (La0.76Sr0.24)(0.93)MnO3 with 0% YSZ, and (b) (La0.77Sr0.23)(0.92)MnO3-YSZ(0.81) with corresponding molar ratio LSM/YSZ = 48:52. X-ray diffraction analysis of as-prepared powders showed the presence of a lanthanum magnesium oxide and yttrium zirconium oxide. Compositional homogeneity and particle morphology were determined by SEM analysis. LSM-YSZ obtained particles are spherical in shape, submicron in size and composed of primary subgrains. TEM analysis of ultra-cross section revealed dense-packed nanosized grains, several tens of nanometers in diameter. After powders calcination TEM observations confirmed dense particle structure composed of primary grains, with a mean diameter of around 100 nm. The structural changes expressed through the crystallite growth were analyzed by nonisothermal differential scanning calorimetry (DSC).
PB  - Elsevier Science Sa, Lausanne
T2  - Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing
T1  - Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments
EP  - 619
SP  - 615
VL  - 375
DO  - 10.1016/j.msea.2003.10.270
ER  - 

@article{
author = "Marinković Stanojević, Zorica and Mančić, Lidija T and Cribier, JF and Ohara, S and Fukui, T and Milošević, Olivera",
year = "2004",
abstract = "Nanocomposite powders in the system (La1-xSx)(a)MnO3-YSZ((1-y)) [LSM-YSZ], as an attractive cathode material for high operating solid oxide fuel cell (SOFC), were obtained through ultrasonic spray pyrolysis (1.7 MHz) method. The principle of the synthesis is based on a single-step high temperature aerosol decomposition of atomized precursor solutions composed from yttria stabilized ZrO2 sol (average particle size similar to 60 nm) and corresponding aqueous nitrate and hydrogen peroxide solutions of La, Sr and Mn. Two starting systems were examined: (a) (La0.76Sr0.24)(0.93)MnO3 with 0% YSZ, and (b) (La0.77Sr0.23)(0.92)MnO3-YSZ(0.81) with corresponding molar ratio LSM/YSZ = 48:52. X-ray diffraction analysis of as-prepared powders showed the presence of a lanthanum magnesium oxide and yttrium zirconium oxide. Compositional homogeneity and particle morphology were determined by SEM analysis. LSM-YSZ obtained particles are spherical in shape, submicron in size and composed of primary subgrains. TEM analysis of ultra-cross section revealed dense-packed nanosized grains, several tens of nanometers in diameter. After powders calcination TEM observations confirmed dense particle structure composed of primary grains, with a mean diameter of around 100 nm. The structural changes expressed through the crystallite growth were analyzed by nonisothermal differential scanning calorimetry (DSC).",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing",
title = "Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments",
pages = "619-615",
volume = "375",
doi = "10.1016/j.msea.2003.10.270"
}

Marinković Stanojević, Z., Mančić, L. T., Cribier, J., Ohara, S., Fukui, T.,& Milošević, O.. (2004). Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments. in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing
Elsevier Science Sa, Lausanne., 375, 615-619.
https://doi.org/10.1016/j.msea.2003.10.270

Marinković Stanojević Z, Mančić LT, Cribier J, Ohara S, Fukui T, Milošević O. Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments. in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing. 2004;375:615-619.
doi:10.1016/j.msea.2003.10.270 .

Marinković Stanojević, Zorica, Mančić, Lidija T, Cribier, JF, Ohara, S, Fukui, T, Milošević, Olivera, "Nature of structural changes in LSM-YSZ nanocomposite material during thermal treatments" in Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 375 (2004):615-619,
https://doi.org/10.1016/j.msea.2003.10.270 . .