Pretraživanje
Prikaz rezultata 1-10 od 14
Impedance Response and Dielectric Relaxation in Liquid-Phase Sintered Zn2SnO4-SnO2 Ceramics
(Springer, New York, 2010)
Impedance/admittance and dielectric spectroscopy were used to investigate the effect of temperature on the electrical response of liquid-phase sintered Zn2SnO4-SnO2 ceramics. The measurements were performed over a wide ...
Dielectric and magnetic properties of BaTiO3-NiFe2O4 multiferroic composites
(Elsevier Sci Ltd, Oxford, 2014)
Multiferroic composites with the general formula x BaTiO3-(1-x) NiFe2O4 (x=0.5, 0.7, 0.8) were prepared by mixing chemically obtained nickel ferrite and barium titanate powders. Optimum processing parameters for a reduction ...
The electrical properties of chemically obtained barium titanate improved by attrition milling
(Springer, New York, 2013)
Barium titanate ceramics were prepared using the nanopowder resulting from a polymeric precursor method, a type of modified Pechini process. The obtained nanopowder was observed to agglomerate and in order to de-agglomerate ...
Dielectric and ferroelectric properties of BST ceramics obtained by a hydrothermally assisted complex polymerization method
(Elsevier Sci Ltd, Oxford, 2015)
Ba0.8Sr0.2TiO3 (BST) powder, obtained by a hydrothermal treatment of precursor solution previously prepared by a complex polymerization method (HT-CPM), was uniaxially pressed and sintered at 1280 degrees C for 1-32 h. The ...
Dielectric and ferroelectric properties of Ho-doped BiFeO3 nanopowders across the structural phase transition
(Elsevier Sci Ltd, Oxford, 2017)
We have studied Ho-doped BiFeO3 nanopowders (Bi1-xHoxFeO3, x = 0-0.15), prepared via sol-gel method, in order to analyse the effect of substitution-driven structural transition on dielectric and ferroelectric properties ...
Comparative study of structural and electrical properties of Pr and Ce doped BiFeO3 ceramics synthesized by auto-combustion method
(Elsevier Science Sa, Lausanne, 2016)
Polycrystalline Bi1-xPr(Ce)(x)FeO3 ceramics (x = 0, 0.03, 0.05 and 0.10) were prepared by auto-combustion method using urea as a fuel. The influence of Pr(Ce) doping on structural, vibrational, morphological, dielectric ...
Electrical properties of niobium doped barium bismuth-titanate ceramics
(Pergamon-Elsevier Science Ltd, Oxford, 2012)
BaBi4Ti4-5/4xNbxO15 (BBNTx, x = 0.0.05, 0.15, 0.30) ceramics have been prepared by solid state method. XRD data indicate the formation of single-phase-layered perovskites for all compositions. SEM micrographs suggest that ...
Structural and electrical properties of sintered Fe2O3/TiO2 nanopowder mixtures
(Elsevier Sci Ltd, Oxford, 2014)
Starting nanopowders of TiO2 (anatase 99.7%) and alpha-Fe2O3 (hematite) were mixed in the weight ratios 60:40 and 40:60. Green samples were sintered in the temperature range 750-1250 degrees C in air. Structural, morphological ...
Electrical properties of antimony doped barium titanate ceramics
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
Antimony doped barium titanate powders were synthesized by polymeric precursors method based on modified Pechini process. Obtained powders were pressed and sintered at 1300 degrees C for 8 h. XRD analysis showed the formation ...
Donor-acceptor joint effect in barium titanate systems
(Elsevier Sci Ltd, Oxford, 2015)
Modified Pechini process was used to prepare nanopowders of barium titanate (BT) co-doped with different concentrations of niobium and manganese. Influence of dopants on the grain growth inhibition and microstructure ...