Претраживање
Приказ резултата 1-6 од 6
The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
(Trans Tech Publications Ltd, Durnten-Zurich, 2006)
In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., ...
Correlation between densification rate and microstructure evolution of mechanically activated BaTiO3
(Taylor & Francis Ltd, Abingdon, 2005)
Increasing demands on the quality of electronic ceramics requires a well-controlled correlation between particle morphology and processing conditions. Since mechanical activation is one of the methods for modification of ...
Far infrared properties of sintered Pb0.9Sn0.1Te doped with palladium
(Springer, New York, 2009)
Far infrared reflectivity spectra of sintered Pb0.9Sn0.1Te doped with 0.2 and 2 at.% Pd are measured. The experimental results are analyzed using a fitting procedure based on a modified plasmon-phonon interaction model. ...
Structural analysis of Zn2TiO4 doped with mgo
(Springer New York LLC, 2009)
The starting mixtures of ZnO, TiO2, and MgO (0, 1.25, and 2.5 wt.%) powders are mechanically activated in a high-energy planetary mill for 15 min and then sintered between 800 and 1100 degrees C for 2 h. The influence of ...
Thermal diffusivity of sintered 12CaO x 7Al(2)O(3)
(Springer Heidelberg, Heidelberg, 2008)
The thermal diffusivity and free carrier diffusion coefficient of 12CaO x 7 Al2O3 ( C12A7) sintered for different times in air or hydrogen followed by treatment with UV light were determined from photoacoustic phase and ...
Application of the master sintering curve theory to non-isothermal sintering of BaTiO3 ceramics
(Trans Tech Publications Ltd, 2005)
In this paper a practical approach to the analysis of sintering of BaTiO3 using the Master Sintering Curve concept has been presented. Non-isothermal sintering of high-purity non-doped BaTiO3 ceramics was monitored using ...