Претраживање
Приказ резултата 1-6 од 6
Electrodeposition of Zn-Mn alloys at high current densities from chloride electrolyte
(Springer, New York, 2013)
The Zn-Mn alloy electrodeposition on a steel electrode in chloride electrolyte was investigated with the aim of obtaining deposits with as high as possible Mn percent. It was found that the deposition current density and ...
Mechanochemical synthesis of yttrium manganite
(Elsevier Science Sa, Lausanne, 2013)
Yttrium manganite (YMnO3) is a multiferroic material, which means that it exhibits both ferromagnetic and ferroelectric properties, so making it interesting for a variety of technological applications. In this work, ...
Effect of preparation route on the microstructure and electrical conductivity of co-doped ceria
(Elsevier Sci Ltd, Oxford, 2013)
Dense Ce0.8Sm0.1Gd0.1O2-delta electrolytes were fabricated by sintering of CeO2 solid solutions which were prepared from metal nitrates and NaOH using self propagating room temperature synthesis (SPRT). Three different ...
Electrical properties of antimony doped barium titanate ceramics
(Pergamon-Elsevier Science Ltd, Oxford, 2013)
Antimony doped barium titanate powders were synthesized by polymeric precursors method based on modified Pechini process. Obtained powders were pressed and sintered at 1300 degrees C for 8 h. XRD analysis showed the formation ...
Mechanochemically assisted solid-state synthesis of Cu substituted thermoelectric sodium cobaltite
(2nd Conference of the Serbian Ceramic Society, 2013)
Polycrystalline samples of Cu substituted NaCo2-xCuxO4 (x=0, 0.01, 0.03, 0.05, 0.1) were prepared using mechanochemically assisted solid-state reaction method starting from the Na2CO3, Co3O4 and CuO powders. Each powder ...
Nanoindentation of nickel manganite ceramics obtained by complex polimerization method
(Institute for Multidisciplinary Research, University of Belgrade Kneza Višeslava 1, 11000 Belgrade, Serbia, 2013)
Nickel manganite is very interesting NTC material due to its outstanding
properties and wide field of applications mainly in microelectronics and
optoelectronics and lately in the mobile phone industry. In this work, ...