Претраживање
Приказ резултата 1-10 од 32
Electrodeposition of Zn-Mn alloys at high current densities from chloride electrolyte
(Springer, New York, 2013)
The Zn-Mn alloy electrodeposition on a steel electrode in chloride electrolyte was investigated with the aim of obtaining deposits with as high as possible Mn percent. It was found that the deposition current density and ...
Service life test of the NiSn coatings as cathodes for hydrogen evolution in industrial chlor-alkali electrolysis
(Pergamon-Elsevier Science Ltd, Oxford, 2014)
In this work the "service life test" (SLT) of the NiSn alloy coatings as cathodes for the hydrogen evolution reaction (HER), deposited onto Ni 40 mesh at different current densities from the bath containing 0.1 mol dm(-3) ...
Formation of the honeycomb-like electrodes by the regime of pulsating overpotential in the second range
(International Association of Physical Chemists, 2012)
In this study the honeycomb-like copper structures electrodeposited by the regime of pulsating overpotential in the second range were analyzed by the technique of scanning electron microscopy. The overpotential amplitude ...
Ni-moo2 cathodes for hydrogen evolution in alkaline solutions. Effect of the conditions of their electrodeposition
(International Association of Physical Chemists, 2013)
The electrodeposition of Ni-MoO2 composite coatings is a specific process taking place under defined hydrodynamic conditions. In this work the influence of hydrodynamics, current density, and MoO2 concentration on the ...
Influence of the complex formation on the morphology of lead powder particles produced by the electrodeposition processes
(Elsevier Science Bv, Amsterdam, 2013)
The processes of lead electrodeposition from the basic (nitrate) and complex (acetate) electrolytes were mutually compared by the analysis of their polarization characteristics and by the scanning electron microscopic (SEM) ...
Morphology and composition of Ni-Co electrodeposited powders
(Elsevier Science Inc, New York, 2011)
The morphology, phase and chemical composition of Ni-Co alloy powders electrodeposited from an ammonium sulfate-boric acid containing electrolyte with different ratio of Ni/Co ions were investigated. The ratios of NVCo ...
Morphology and composition of the Fe-Ni powders electrodeposited from citrate containing electrolytes
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
The electrodeposition of the Fe-Ni powders from citrate containing electrolytes for different Ni/Fe ions concentration ratios, using Fe(Ill) and Fe(II) salts at pH 4.5 and pH 4.0 respectively was investigated by the ...
Characterization of electrodeposited Cd-Co alloy coatings by anodic linear sweep voltammetry
(Pergamon-Elsevier Science Ltd, Oxford, 2009)
The electrodeposited Cd-Co alloys were characterized by the anodic linear sweep voltammetry (ALSV) technique in the solution of 1 M NaCl (pH 2). It is shown that Cd-Co alloys could be deposited with high current efficiency ...
An attempt to produce NiFe2O4 powder from electrodeposited Fe-Ni alloy powders by subsequent recrystallization in air
(Springer, Dordrecht, 2010)
The electrodeposition of the Fe-Ni powders from citrate-ammonium chloride containing electrolytes for different Ni/Fe ions concentration ratios at pH 4.0 was investigated by the polarization measurements. The morphology, ...
Determination of kinetic parameters for the hydrogen evolution reaction on the electrodeposited Ni-MoO2 composite coating in alkaline solution
(Elsevier Science Sa, Lausanne, 2012)
As a result of research on the non-noble metal-based composite electrocatalysts for the hydrogen evolution reaction (HER), the Ni-MoO2 composite coating was produced by electrodeposition from an NH4Cl and NiCl2 containing ...