Baščarević, Z., Komljenović, M. M., Džunuzović, N., Nikolic, V., Petrašinović-Stojkanović, L.,& Ršumović, M.. (2010). Поступак добијања геополимера на бази ЕФП Свилајнац алкалном активацијом електрофилтерског пепела раствором натријум-силиката модула 0,5. .
https://hdl.handle.net/21.15107/rcub_rimsi_2919

Baščarević Z, Komljenović MM, Džunuzović N, Nikolic V, Petrašinović-Stojkanović L, Ršumović M. Поступак добијања геополимера на бази ЕФП Свилајнац алкалном активацијом електрофилтерског пепела раствором натријум-силиката модула 0,5. 2010;.
https://hdl.handle.net/21.15107/rcub_rimsi_2919 .

Baščarević, Zvezdana, Komljenović, Miroslav M, Džunuzović, Nataša, Nikolic, Violeta, Petrašinović-Stojkanović, Ljiljana, Ršumović, Mihailo, "Поступак добијања геополимера на бази ЕФП Свилајнац алкалном активацијом електрофилтерског пепела раствором натријум-силиката модула 0,5" (2010),
https://hdl.handle.net/21.15107/rcub_rimsi_2919 .

Nikolić, V., Komljenović, M. M., Petrašinović-Stojkanović, L., Baščarević, Z., Džunuzović, N.,& Ršumović, M.. (2010). Синтеза геополимера на бази електрофилтерског пепела ТЕ Морава алкалном активацијом раствором воденог стакла модула 1,5. in 2010.
https://hdl.handle.net/21.15107/rcub_rimsi_2750

Nikolić V, Komljenović MM, Petrašinović-Stojkanović L, Baščarević Z, Džunuzović N, Ršumović M. Синтеза геополимера на бази електрофилтерског пепела ТЕ Морава алкалном активацијом раствором воденог стакла модула 1,5. in 2010. 2010;.
https://hdl.handle.net/21.15107/rcub_rimsi_2750 .

Nikolić, Violeta, Komljenović, Miroslav M, Petrašinović-Stojkanović, Ljiljana, Baščarević, Zvezdana, Džunuzović, Nataša, Ršumović, Mihailo, "Синтеза геополимера на бази електрофилтерског пепела ТЕ Морава алкалном активацијом раствором воденог стакла модула 1,5" in 2010 (2010),
https://hdl.handle.net/21.15107/rcub_rimsi_2750 .

Džunuzović, N., Komljenović, M. M., Petrašinović-Stojkanović, L., Nikolić, V., Baščarević, Z., Rosić, A.,& Ršumović, M.. (2010). Синтеза геополимера на бази електрофилтерског пепела ТЕ Костолац Б2 поступком алкалне активације раствором воденог стакла. in 2010.
https://hdl.handle.net/21.15107/rcub_rimsi_2751

Džunuzović N, Komljenović MM, Petrašinović-Stojkanović L, Nikolić V, Baščarević Z, Rosić A, Ršumović M. Синтеза геополимера на бази електрофилтерског пепела ТЕ Костолац Б2 поступком алкалне активације раствором воденог стакла. in 2010. 2010;.
https://hdl.handle.net/21.15107/rcub_rimsi_2751 .

Džunuzović, Nataša, Komljenović, Miroslav M, Petrašinović-Stojkanović, Ljiljana, Nikolić, Violeta, Baščarević, Zvezdana, Rosić, Aleksandra, Ršumović, Mihailo, "Синтеза геополимера на бази електрофилтерског пепела ТЕ Костолац Б2 поступком алкалне активације раствором воденог стакла" in 2010 (2010),
https://hdl.handle.net/21.15107/rcub_rimsi_2751 .

TY  - JOUR
AU  - Komljenović, Miroslav M
AU  - Baščarević, Zvezdana
AU  - Nikolić, Violeta
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/430
AB  - This paper investigates the properties of geopolymer obtained by alkali-activation of fly ash (FA), i.e. the influence of characteristics of the representative group of FA (class F) from Serbia, as well as that of the nature and concentration of various activators on mechanical and microstructural properties of geopolymers. Aqueous solutions of Ca(OH)(2), NaOH, NaOH + Na2CO3, KOH and sodium silicate (water glass) of various concentrations were used as alkali activators. It was established that the nature and concentration of the activator was the most dominant parameter in the alkali-activation process. In respect of physical characteristics of FA, the key parameter was fineness. The geopolymer based on FA with the highest content of fine particles ( lt 43 mu m), showed the highest compressive strength in all cases. Regardless of FA characteristics, nature and concentration of the activator, the alkali-activation products were mainly amorphous. The formation of crystalline phases (zeolites) occurred in some cases, depending on the reaction conditions. The highest compressive strength was obtained using sodium silicate. Together with the increase of sodium silicate SiO2/Na2O mass ratio, the atomic Si/Al ratio in the reaction products was also increased. Under the experimental conditions of this investigation, high strength was directly related to the high Si/Al ratio.
PB  - Elsevier, Amsterdam
T2  - Journal of Hazardous Materials
T1  - Mechanical and microstructural properties of alkali-activated fly ash geopolymers
EP  - 42
IS  - 1-3
SP  - 35
VL  - 181
DO  - 10.1016/j.jhazmat.2010.04.064
ER  - 

@article{
author = "Komljenović, Miroslav M and Baščarević, Zvezdana and Nikolić, Violeta",
year = "2010",
abstract = "This paper investigates the properties of geopolymer obtained by alkali-activation of fly ash (FA), i.e. the influence of characteristics of the representative group of FA (class F) from Serbia, as well as that of the nature and concentration of various activators on mechanical and microstructural properties of geopolymers. Aqueous solutions of Ca(OH)(2), NaOH, NaOH + Na2CO3, KOH and sodium silicate (water glass) of various concentrations were used as alkali activators. It was established that the nature and concentration of the activator was the most dominant parameter in the alkali-activation process. In respect of physical characteristics of FA, the key parameter was fineness. The geopolymer based on FA with the highest content of fine particles ( lt 43 mu m), showed the highest compressive strength in all cases. Regardless of FA characteristics, nature and concentration of the activator, the alkali-activation products were mainly amorphous. The formation of crystalline phases (zeolites) occurred in some cases, depending on the reaction conditions. The highest compressive strength was obtained using sodium silicate. Together with the increase of sodium silicate SiO2/Na2O mass ratio, the atomic Si/Al ratio in the reaction products was also increased. Under the experimental conditions of this investigation, high strength was directly related to the high Si/Al ratio.",
publisher = "Elsevier, Amsterdam",
journal = "Journal of Hazardous Materials",
title = "Mechanical and microstructural properties of alkali-activated fly ash geopolymers",
pages = "42-35",
number = "1-3",
volume = "181",
doi = "10.1016/j.jhazmat.2010.04.064"
}

Komljenović, M. M., Baščarević, Z.,& Nikolić, V.. (2010). Mechanical and microstructural properties of alkali-activated fly ash geopolymers. in Journal of Hazardous Materials
Elsevier, Amsterdam., 181(1-3), 35-42.
https://doi.org/10.1016/j.jhazmat.2010.04.064

Komljenović MM, Baščarević Z, Nikolić V. Mechanical and microstructural properties of alkali-activated fly ash geopolymers. in Journal of Hazardous Materials. 2010;181(1-3):35-42.
doi:10.1016/j.jhazmat.2010.04.064 .

Komljenović, Miroslav M, Baščarević, Zvezdana, Nikolić, Violeta, "Mechanical and microstructural properties of alkali-activated fly ash geopolymers" in Journal of Hazardous Materials, 181, no. 1-3 (2010):35-42,
https://doi.org/10.1016/j.jhazmat.2010.04.064 . .

TY  - JOUR
AU  - Komljenović, Miroslav M
AU  - Petrasinovic-Stojkanović, Lj.
AU  - Baščarević, Zvezdana
AU  - Džunuzović, Nataša
AU  - Rosic, A.
PY  - 2009
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/355
AB  - This paper presents the results of investigation of properties of fly ash from four major thermal power plants in Serbia. Chemical, mineralogical and thermal characterization of fly ash has been performed in order to determine the possibility of its use as the raw material for the construction material industry, primarily the cement industry. Thermal properties of the raw mixtures for Portland cement clinker production based on fly ash were also investigated. The conclusion was reached that the use of fly ash as a component of the raw mixture components for the production of cement clinker not only enables substitution of natural raw materials, but could also have a positive influence on reduction of the sintering temperature of Portland cement clinker.
PB  - Springer, Dordrecht
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Fly ash as the potential raw mixture component for portland cement clinker synthesis
EP  - 368
IS  - 2
SP  - 363
VL  - 96
DO  - 10.1007/s10973-008-8951-0
ER  - 

@article{
author = "Komljenović, Miroslav M and Petrasinovic-Stojkanović, Lj. and Baščarević, Zvezdana and Džunuzović, Nataša and Rosic, A.",
year = "2009",
abstract = "This paper presents the results of investigation of properties of fly ash from four major thermal power plants in Serbia. Chemical, mineralogical and thermal characterization of fly ash has been performed in order to determine the possibility of its use as the raw material for the construction material industry, primarily the cement industry. Thermal properties of the raw mixtures for Portland cement clinker production based on fly ash were also investigated. The conclusion was reached that the use of fly ash as a component of the raw mixture components for the production of cement clinker not only enables substitution of natural raw materials, but could also have a positive influence on reduction of the sintering temperature of Portland cement clinker.",
publisher = "Springer, Dordrecht",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Fly ash as the potential raw mixture component for portland cement clinker synthesis",
pages = "368-363",
number = "2",
volume = "96",
doi = "10.1007/s10973-008-8951-0"
}

Komljenović, M. M., Petrasinovic-Stojkanović, Lj., Baščarević, Z., Džunuzović, N.,& Rosic, A.. (2009). Fly ash as the potential raw mixture component for portland cement clinker synthesis. in Journal of Thermal Analysis and Calorimetry
Springer, Dordrecht., 96(2), 363-368.
https://doi.org/10.1007/s10973-008-8951-0

Komljenović MM, Petrasinovic-Stojkanović L, Baščarević Z, Džunuzović N, Rosic A. Fly ash as the potential raw mixture component for portland cement clinker synthesis. in Journal of Thermal Analysis and Calorimetry. 2009;96(2):363-368.
doi:10.1007/s10973-008-8951-0 .

Komljenović, Miroslav M, Petrasinovic-Stojkanović, Lj., Baščarević, Zvezdana, Džunuzović, Nataša, Rosic, A., "Fly ash as the potential raw mixture component for portland cement clinker synthesis" in Journal of Thermal Analysis and Calorimetry, 96, no. 2 (2009):363-368,
https://doi.org/10.1007/s10973-008-8951-0 . .