Fly ash as the potential raw mixture component for portland cement clinker synthesis
Само за регистроване кориснике
2009
Аутори
Komljenović, Miroslav MPetrasinovic-Stojkanović, Lj.
Baščarević, Zvezdana
Džunuzović, Nataša
Rosic, A.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
This paper presents the results of investigation of properties of fly ash from four major thermal power plants in Serbia. Chemical, mineralogical and thermal characterization of fly ash has been performed in order to determine the possibility of its use as the raw material for the construction material industry, primarily the cement industry. Thermal properties of the raw mixtures for Portland cement clinker production based on fly ash were also investigated. The conclusion was reached that the use of fly ash as a component of the raw mixture components for the production of cement clinker not only enables substitution of natural raw materials, but could also have a positive influence on reduction of the sintering temperature of Portland cement clinker.
Кључне речи:
thermal properties / fly ash / characterizationИзвор:
Journal of Thermal Analysis and Calorimetry, 2009, 96, 2, 363-368Издавач:
- Springer, Dordrecht
Финансирање / пројекти:
- Гeoпoлимeри – нови материјали на бази eлeктрoфилтeрскoг пeпeла тeрмoeлeктрана у oквиру кoнцeпта oдрживoг развoја (RS-MESTD-MPN2006-2010-19001)
DOI: 10.1007/s10973-008-8951-0
ISSN: 1388-6150
WoS: 000266482600004
Scopus: 2-s2.0-67349141378
Институција/група
Institut za multidisciplinarna istraživanjaTY - JOUR AU - Komljenović, Miroslav M AU - Petrasinovic-Stojkanović, Lj. AU - Baščarević, Zvezdana AU - Džunuzović, Nataša AU - Rosic, A. PY - 2009 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/355 AB - This paper presents the results of investigation of properties of fly ash from four major thermal power plants in Serbia. Chemical, mineralogical and thermal characterization of fly ash has been performed in order to determine the possibility of its use as the raw material for the construction material industry, primarily the cement industry. Thermal properties of the raw mixtures for Portland cement clinker production based on fly ash were also investigated. The conclusion was reached that the use of fly ash as a component of the raw mixture components for the production of cement clinker not only enables substitution of natural raw materials, but could also have a positive influence on reduction of the sintering temperature of Portland cement clinker. PB - Springer, Dordrecht T2 - Journal of Thermal Analysis and Calorimetry T1 - Fly ash as the potential raw mixture component for portland cement clinker synthesis EP - 368 IS - 2 SP - 363 VL - 96 DO - 10.1007/s10973-008-8951-0 ER -
@article{ author = "Komljenović, Miroslav M and Petrasinovic-Stojkanović, Lj. and Baščarević, Zvezdana and Džunuzović, Nataša and Rosic, A.", year = "2009", abstract = "This paper presents the results of investigation of properties of fly ash from four major thermal power plants in Serbia. Chemical, mineralogical and thermal characterization of fly ash has been performed in order to determine the possibility of its use as the raw material for the construction material industry, primarily the cement industry. Thermal properties of the raw mixtures for Portland cement clinker production based on fly ash were also investigated. The conclusion was reached that the use of fly ash as a component of the raw mixture components for the production of cement clinker not only enables substitution of natural raw materials, but could also have a positive influence on reduction of the sintering temperature of Portland cement clinker.", publisher = "Springer, Dordrecht", journal = "Journal of Thermal Analysis and Calorimetry", title = "Fly ash as the potential raw mixture component for portland cement clinker synthesis", pages = "368-363", number = "2", volume = "96", doi = "10.1007/s10973-008-8951-0" }
Komljenović, M. M., Petrasinovic-Stojkanović, Lj., Baščarević, Z., Džunuzović, N.,& Rosic, A.. (2009). Fly ash as the potential raw mixture component for portland cement clinker synthesis. in Journal of Thermal Analysis and Calorimetry Springer, Dordrecht., 96(2), 363-368. https://doi.org/10.1007/s10973-008-8951-0
Komljenović MM, Petrasinovic-Stojkanović L, Baščarević Z, Džunuzović N, Rosic A. Fly ash as the potential raw mixture component for portland cement clinker synthesis. in Journal of Thermal Analysis and Calorimetry. 2009;96(2):363-368. doi:10.1007/s10973-008-8951-0 .
Komljenović, Miroslav M, Petrasinovic-Stojkanović, Lj., Baščarević, Zvezdana, Džunuzović, Nataša, Rosic, A., "Fly ash as the potential raw mixture component for portland cement clinker synthesis" in Journal of Thermal Analysis and Calorimetry, 96, no. 2 (2009):363-368, https://doi.org/10.1007/s10973-008-8951-0 . .