TY  - CONF
AU  - Radojković, Aleksandar
AU  - Luković Golić, Danijela
AU  - JOVIĆ ORSINI, Nataša
AU  - Ćirković, Jovana
AU  - Nikolić, Nenad
AU  - Branković, Zorica
AU  - Branković, Goran
PY  - 2023
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2386
AB  - In this study, we tried various cation substitutions at Bi-site (La3+, Eu3+) and Fesite (Nb5+
, Zr4+
) to explore their possible synergism and improvement of the
ferroelectric properties of bismuth ferrite. The cations with higher valence ought to
suppress the formation of structural defects during syntheses, such as oxygen and
bismuth vacancies. These defects are responsible for high leakage currents and low
breakdown voltages characteristic of pure BiFeO3. On the other hand, rare earth
cations at the Bi-site usually enable densification of the ceramics at a broader range
of temperatures, preventing bismuth loss and formation of defects and secondary
phases during sintering. However, dopant concentrations above 10–15 mol% may
give rise to a transition from polar, rhombohedral (R3c) to non-polar, orthorhombic
(Pnma) symmetry.
Thus, we synthesized pure and selected compositions doped BiFeO3 by a hydroevaporation method and determined the optimal calcination temperature by thermal
analyses of the precursor powders. Then we characterized ceramics samples using
X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and
polarization techniques. Although only 1 mol% Nb5+ decreased the leakage current,
it surprisingly deteriorated the ferroelectric properties of BiFeO3. Similar effect
exhibited the samples containing Zr4+ that showed no improvement compared with
undoped bismuth ferrite. On the contrary, La3+ and Eu3+ (incorporated at the Bi-site)
improved the ferroelectric properties as their concentrations increased, whereby the
samples doped with 15 mol% La exhibited higher remnant electric polarizations at
observed electric fields. The highest remnant electric polarization of 31.9 µC/cm2
at 150 kV/cm, was measured for Bi0.85La0.15Fe0.998Zr0.002O3, indicating the synergetic
effect of La3+ and Zr4+, which is limited to low Zr4+ concentrations.
PB  - Društvo za keramičke materijale Srbije
C3  - 7th Conference of the Serbian Ceramic Society
T1  - TUNING OF FERROELECTRIC PROPERTIES OF BiFeO3 CERAMICS BY CATION SUBSTITUTIONS AT Bi-SITE AND Fe-SITE
SP  - 79
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2386
ER  - 

@conference{
author = "Radojković, Aleksandar and Luković Golić, Danijela and JOVIĆ ORSINI, Nataša and Ćirković, Jovana and Nikolić, Nenad and Branković, Zorica and Branković, Goran",
year = "2023",
abstract = "In this study, we tried various cation substitutions at Bi-site (La3+, Eu3+) and Fesite (Nb5+
, Zr4+
) to explore their possible synergism and improvement of the
ferroelectric properties of bismuth ferrite. The cations with higher valence ought to
suppress the formation of structural defects during syntheses, such as oxygen and
bismuth vacancies. These defects are responsible for high leakage currents and low
breakdown voltages characteristic of pure BiFeO3. On the other hand, rare earth
cations at the Bi-site usually enable densification of the ceramics at a broader range
of temperatures, preventing bismuth loss and formation of defects and secondary
phases during sintering. However, dopant concentrations above 10–15 mol% may
give rise to a transition from polar, rhombohedral (R3c) to non-polar, orthorhombic
(Pnma) symmetry.
Thus, we synthesized pure and selected compositions doped BiFeO3 by a hydroevaporation method and determined the optimal calcination temperature by thermal
analyses of the precursor powders. Then we characterized ceramics samples using
X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) and
polarization techniques. Although only 1 mol% Nb5+ decreased the leakage current,
it surprisingly deteriorated the ferroelectric properties of BiFeO3. Similar effect
exhibited the samples containing Zr4+ that showed no improvement compared with
undoped bismuth ferrite. On the contrary, La3+ and Eu3+ (incorporated at the Bi-site)
improved the ferroelectric properties as their concentrations increased, whereby the
samples doped with 15 mol% La exhibited higher remnant electric polarizations at
observed electric fields. The highest remnant electric polarization of 31.9 µC/cm2
at 150 kV/cm, was measured for Bi0.85La0.15Fe0.998Zr0.002O3, indicating the synergetic
effect of La3+ and Zr4+, which is limited to low Zr4+ concentrations.",
publisher = "Društvo za keramičke materijale Srbije",
journal = "7th Conference of the Serbian Ceramic Society",
title = "TUNING OF FERROELECTRIC PROPERTIES OF BiFeO3 CERAMICS BY CATION SUBSTITUTIONS AT Bi-SITE AND Fe-SITE",
pages = "79",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2386"
}

Radojković, A., Luković Golić, D., JOVIĆ ORSINI, N., Ćirković, J., Nikolić, N., Branković, Z.,& Branković, G.. (2023). TUNING OF FERROELECTRIC PROPERTIES OF BiFeO3 CERAMICS BY CATION SUBSTITUTIONS AT Bi-SITE AND Fe-SITE. in 7th Conference of the Serbian Ceramic Society
Društvo za keramičke materijale Srbije., 79.
https://hdl.handle.net/21.15107/rcub_rimsi_2386

Radojković A, Luković Golić D, JOVIĆ ORSINI N, Ćirković J, Nikolić N, Branković Z, Branković G. TUNING OF FERROELECTRIC PROPERTIES OF BiFeO3 CERAMICS BY CATION SUBSTITUTIONS AT Bi-SITE AND Fe-SITE. in 7th Conference of the Serbian Ceramic Society. 2023;:79.
https://hdl.handle.net/21.15107/rcub_rimsi_2386 .

Radojković, Aleksandar, Luković Golić, Danijela, JOVIĆ ORSINI, Nataša, Ćirković, Jovana, Nikolić, Nenad, Branković, Zorica, Branković, Goran, "TUNING OF FERROELECTRIC PROPERTIES OF BiFeO3 CERAMICS BY CATION SUBSTITUTIONS AT Bi-SITE AND Fe-SITE" in 7th Conference of the Serbian Ceramic Society (2023):79,
https://hdl.handle.net/21.15107/rcub_rimsi_2386 .

TY  - CONF
AU  - Simović, Nemanja
AU  - Dobrosavljević, Jovan N.
AU  - Milenković, Ivan
AU  - Branković, Goran
AU  - Branković, Zorica
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Perać, Sanja
AU  - Jovanović, Jelena
AU  - Jovanović, Dušan
AU  - Milanovic, Slobodan
PY  - 2023
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2208
AB  - With the significant loss of biodiversity in the 20th and 21st century, pollution of air, soil, and water, alternatives to chemical pesticides are needed to preserve nature. One of the alternatives is the usage of plant components as pest insect control. They are an appropriate alternative to chemical pesticides as they are cost-effective, easy, and safe to use, do not affect the environment or beneficial insects negatively, and are still an effective measure against pest insects. The biggest challenge with plant components is that they are biologically unstable. That is why further insight into the effectiveness of different extracts and oils against different pest insects is needed. We tested the antifeedant activity of plant products derived from neem (Azadirachta indica A.Juss.), and linalool on the Spongy moth (Lymantria dispar L, 1758) larvae. To test the efficiency of these compounds, we conducted choice tests in laboratory conditions. Two disks (treatment and control) cut from red oak (Quercus rubra L.) leaves were presented to the second instar spongy moth larvae in Petri dishes for the testing. Twenty-five Petri dishes were used for each of the tested compounds at four concentrations (200 in total). The tested compounds showed the most significant effect at higher concentrations.
C3  - XIV International Scientific Agriculture Symposium "AGROSYM 2023"
T1  - Antifeedant activity of the plant products derived from the neem and linalool on the spongy moth larvae
SP  - 345
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2208
ER  - 

@conference{
author = "Simović, Nemanja and Dobrosavljević, Jovan N. and Milenković, Ivan and Branković, Goran and Branković, Zorica and Ćirković, Jovana and Radojković, Aleksandar and Perać, Sanja and Jovanović, Jelena and Jovanović, Dušan and Milanovic, Slobodan",
year = "2023",
abstract = "With the significant loss of biodiversity in the 20th and 21st century, pollution of air, soil, and water, alternatives to chemical pesticides are needed to preserve nature. One of the alternatives is the usage of plant components as pest insect control. They are an appropriate alternative to chemical pesticides as they are cost-effective, easy, and safe to use, do not affect the environment or beneficial insects negatively, and are still an effective measure against pest insects. The biggest challenge with plant components is that they are biologically unstable. That is why further insight into the effectiveness of different extracts and oils against different pest insects is needed. We tested the antifeedant activity of plant products derived from neem (Azadirachta indica A.Juss.), and linalool on the Spongy moth (Lymantria dispar L, 1758) larvae. To test the efficiency of these compounds, we conducted choice tests in laboratory conditions. Two disks (treatment and control) cut from red oak (Quercus rubra L.) leaves were presented to the second instar spongy moth larvae in Petri dishes for the testing. Twenty-five Petri dishes were used for each of the tested compounds at four concentrations (200 in total). The tested compounds showed the most significant effect at higher concentrations.",
journal = "XIV International Scientific Agriculture Symposium "AGROSYM 2023"",
title = "Antifeedant activity of the plant products derived from the neem and linalool on the spongy moth larvae",
pages = "345",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2208"
}

Simović, N., Dobrosavljević, J. N., Milenković, I., Branković, G., Branković, Z., Ćirković, J., Radojković, A., Perać, S., Jovanović, J., Jovanović, D.,& Milanovic, S.. (2023). Antifeedant activity of the plant products derived from the neem and linalool on the spongy moth larvae. in XIV International Scientific Agriculture Symposium "AGROSYM 2023", 345.
https://hdl.handle.net/21.15107/rcub_rimsi_2208

Simović N, Dobrosavljević JN, Milenković I, Branković G, Branković Z, Ćirković J, Radojković A, Perać S, Jovanović J, Jovanović D, Milanovic S. Antifeedant activity of the plant products derived from the neem and linalool on the spongy moth larvae. in XIV International Scientific Agriculture Symposium "AGROSYM 2023". 2023;:345.
https://hdl.handle.net/21.15107/rcub_rimsi_2208 .

Simović, Nemanja, Dobrosavljević, Jovan N., Milenković, Ivan, Branković, Goran, Branković, Zorica, Ćirković, Jovana, Radojković, Aleksandar, Perać, Sanja, Jovanović, Jelena, Jovanović, Dušan, Milanovic, Slobodan, "Antifeedant activity of the plant products derived from the neem and linalool on the spongy moth larvae" in XIV International Scientific Agriculture Symposium "AGROSYM 2023" (2023):345,
https://hdl.handle.net/21.15107/rcub_rimsi_2208 .

TY  - JOUR
AU  - Vujancevic, Jelena
AU  - Andričević, Pavao
AU  - Djokic, Veljko
AU  - Blagojevic, Vladimir
AU  - Pavlović, Vera
AU  - Ćirković, Jovana
AU  - Horvath, Endre
AU  - Forro, Laszlo
AU  - Karoui, Abdennaceur
AU  - Pavlović, Vladimir
AU  - Janackovic, Djordje
PY  - 2023
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2863
AB  - In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs
PB  - MDPI
T2  - Catalysts
T1  - Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal
VL  - 13
DO  - 10.3390/catal13020352
ER  - 

@article{
author = "Vujancevic, Jelena and Andričević, Pavao and Djokic, Veljko and Blagojevic, Vladimir and Pavlović, Vera and Ćirković, Jovana and Horvath, Endre and Forro, Laszlo and Karoui, Abdennaceur and Pavlović, Vladimir and Janackovic, Djordje",
year = "2023",
abstract = "In this study, we report the influence of vanadium oxide (VO), as a photosensitive component, on the photoactivity of TiO2 nanotubes (TNTs). A series of TNTs of varying tube diameter were synthesized by the anodization of titanium foils at different voltages, while vanadium oxide was deposited on TNTs by wet chemical deposition. An improvement in the optical properties of nanotubes was observed after the deposition of vanadium oxide. An improvement in the optical properties (redshift in UV-Vis spectra) of TNTs and TNT/VO was noted. The photocatalytic activity was improved with increasing tube diameter, while it was weakened after the deposition of VO. Furthermore, photoactivity was investigated in photodiodes based on TNTs or TNT/VO and single crystals of CH3NH3PbI3. The photoelectric measurement revealed that different TNT diameters did not influence the I-V characteristic of the photodiodes, while the deposition of VO improved the photocurrent for smaller TNTs",
publisher = "MDPI",
journal = "Catalysts",
title = "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal",
volume = "13",
doi = "10.3390/catal13020352"
}

Vujancevic, J., Andričević, P., Djokic, V., Blagojevic, V., Pavlović, V., Ćirković, J., Horvath, E., Forro, L., Karoui, A., Pavlović, V.,& Janackovic, D.. (2023). Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts
MDPI., 13.
https://doi.org/10.3390/catal13020352

Vujancevic J, Andričević P, Djokic V, Blagojevic V, Pavlović V, Ćirković J, Horvath E, Forro L, Karoui A, Pavlović V, Janackovic D. Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal. in Catalysts. 2023;13.
doi:10.3390/catal13020352 .

Vujancevic, Jelena, Andričević, Pavao, Djokic, Veljko, Blagojevic, Vladimir, Pavlović, Vera, Ćirković, Jovana, Horvath, Endre, Forro, Laszlo, Karoui, Abdennaceur, Pavlović, Vladimir, Janackovic, Djordje, "Effect of the Deposition of Vanadium-Oxide on the Photocatalytic Activity of TiO2 Nanotubes and Its Photodiode Performance Interfaced with CH3NH3PbI3 Single Crystal" in Catalysts, 13 (2023),
https://doi.org/10.3390/catal13020352 . .

TY  - CONF
AU  - Jelić, Stefan
AU  - Ćirković, Jovana
AU  - Jovanović, Jelena
AU  - Radojković, Aleksandar
AU  - Novaković, Tatjana
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2023
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2296
AB  - Efficiency of a semiconductor catalyst is directly correlated to its surface to
which a reactant species is adsorbed. There are several ways to optimize the active
surface, such as synthesis, processing or any aftertreatment of a photocatalytic
material. Our research was focused on modifying the existing sonochemically
assisted synthesis of bismuth vanadate.
Two optimization methods were used in order to increase specific surface of the
photocatalyst and number of its active sites. The first method was to change
concentration of reactants used in the synthesis to reduce agglomeration of bismuth
vanadate. Sonochemically assisted synthesis was performed with three different
concentrations of reactants to observe agglomeration tendency of the catalyst. The
other method included the use of sodium dodecyl sulfate (SDS) as a surfactant in
synthesis at highest concentration in order to hinder the particle growth.
Bismuth vanadate was shown to degrade mordant blue 9 dye (MB9) most
effectively in alkaline medium (pH = 13) under visible light, discoloring the solution
in under 2 hours, while the highest adsorption of MB9 is observed in acidic solution
(pH = 1).
PB  - Serbian Society for Ceramic Materials
T1  - Synthesis of Bismuth Vanadate Photocatalyst with Enhanced Adsorption Properties
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2296
ER  - 

@conference{
author = "Jelić, Stefan and Ćirković, Jovana and Jovanović, Jelena and Radojković, Aleksandar and Novaković, Tatjana and Branković, Goran and Branković, Zorica",
year = "2023",
abstract = "Efficiency of a semiconductor catalyst is directly correlated to its surface to
which a reactant species is adsorbed. There are several ways to optimize the active
surface, such as synthesis, processing or any aftertreatment of a photocatalytic
material. Our research was focused on modifying the existing sonochemically
assisted synthesis of bismuth vanadate.
Two optimization methods were used in order to increase specific surface of the
photocatalyst and number of its active sites. The first method was to change
concentration of reactants used in the synthesis to reduce agglomeration of bismuth
vanadate. Sonochemically assisted synthesis was performed with three different
concentrations of reactants to observe agglomeration tendency of the catalyst. The
other method included the use of sodium dodecyl sulfate (SDS) as a surfactant in
synthesis at highest concentration in order to hinder the particle growth.
Bismuth vanadate was shown to degrade mordant blue 9 dye (MB9) most
effectively in alkaline medium (pH = 13) under visible light, discoloring the solution
in under 2 hours, while the highest adsorption of MB9 is observed in acidic solution
(pH = 1).",
publisher = "Serbian Society for Ceramic Materials",
title = "Synthesis of Bismuth Vanadate Photocatalyst with Enhanced Adsorption Properties",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2296"
}

Jelić, S., Ćirković, J., Jovanović, J., Radojković, A., Novaković, T., Branković, G.,& Branković, Z.. (2023). Synthesis of Bismuth Vanadate Photocatalyst with Enhanced Adsorption Properties. 
Serbian Society for Ceramic Materials..
https://hdl.handle.net/21.15107/rcub_rimsi_2296

Jelić S, Ćirković J, Jovanović J, Radojković A, Novaković T, Branković G, Branković Z. Synthesis of Bismuth Vanadate Photocatalyst with Enhanced Adsorption Properties. 2023;.
https://hdl.handle.net/21.15107/rcub_rimsi_2296 .

Jelić, Stefan, Ćirković, Jovana, Jovanović, Jelena, Radojković, Aleksandar, Novaković, Tatjana, Branković, Goran, Branković, Zorica, "Synthesis of Bismuth Vanadate Photocatalyst with Enhanced Adsorption Properties" (2023),
https://hdl.handle.net/21.15107/rcub_rimsi_2296 .

TY  - JOUR
AU  - Armaković,Sanja J.
AU  - Jovanoski Kostić,Aleksandra
AU  - Bilić,Andrijana
AU  - Savanović,Maria M.
AU  - Tomić,Nataša
AU  - Kremenović,Aleksandar
AU  - Šćepanović,Maja
AU  - Grujić-Brojčin,Mirjana
AU  - Ćirković, Jovana
AU  - Armaković,Stevan
PY  - 2023
AB  - Due to the inability of conventional wastewater treatment procedures to remove organic
pharmaceutical pollutants, active pharmaceutical components remain in wastewater and even reach
tap water. In terms of pharmaceutical pollutants, the scientific community focuses on  -blockers due
to their extensive (over)usage and moderately high solubility. In this study, the photocatalytic activity
of V2O5 was investigated through the degradation of nadolol (NAD), pindolol (PIN), metoprolol
(MET), and their mixture under ultraviolet (UV) irradiation in water. For the preparation of V2O5,
facile hydrothermal synthesis was used. The structural, morphological, and surface properties
and purity of synthesized V2O5 powder were investigated by scanning electron microscopy (SEM),
X-ray, and Raman spectroscopy. SEM micrographs showed hexagonal-shaped platelets with welldefined
morphology of materials with diameters in the range of 10–65 μm and thickness of around
a few microns. X-ray diffraction identified only one crystalline phase in the sample. The Raman
scattering measurements taken on the catalyst confirmed the result of XRPD. Degradation kinetics
were monitored by ultra-fast liquid chromatography with diode array detection. The results showed
that in individual solutions, photocatalytic degradation of MET and NAD was relatively insignificant
(<10%). However, in the PIN case, the degradation was significant (64%). In the mixture, the
photodegradation efficiency of MET and NAD slightly increased (15% and 13%). Conversely, it
reduced the PIN to the still satisfactory value of 40%. Computational analysis based on molecular and
periodic density functional theory calculations was used to complement our experimental findings.
Calculations of the average local ionization energy indicate that the PIN is the most reactive of all
three considered molecules in terms of removing an electron from it.
PB  - MDPI
T2  - Molecules
T1  - Photocatalytic Activity of the V2O5 Catalyst toward Selected
Pharmaceuticals and Their Mixture: Influence of the Molecular
Structure on the Efficiency of the Process
EP  - 18
SP  - 1
VL  - 28
DO  - 10.3390/molecules28020655
ER  - 

@article{
author = "Armaković,Sanja J. and Jovanoski Kostić,Aleksandra and Bilić,Andrijana and Savanović,Maria M. and Tomić,Nataša and Kremenović,Aleksandar and Šćepanović,Maja and Grujić-Brojčin,Mirjana and Ćirković, Jovana and Armaković,Stevan",
year = "2023",
abstract = "Due to the inability of conventional wastewater treatment procedures to remove organic
pharmaceutical pollutants, active pharmaceutical components remain in wastewater and even reach
tap water. In terms of pharmaceutical pollutants, the scientific community focuses on  -blockers due
to their extensive (over)usage and moderately high solubility. In this study, the photocatalytic activity
of V2O5 was investigated through the degradation of nadolol (NAD), pindolol (PIN), metoprolol
(MET), and their mixture under ultraviolet (UV) irradiation in water. For the preparation of V2O5,
facile hydrothermal synthesis was used. The structural, morphological, and surface properties
and purity of synthesized V2O5 powder were investigated by scanning electron microscopy (SEM),
X-ray, and Raman spectroscopy. SEM micrographs showed hexagonal-shaped platelets with welldefined
morphology of materials with diameters in the range of 10–65 μm and thickness of around
a few microns. X-ray diffraction identified only one crystalline phase in the sample. The Raman
scattering measurements taken on the catalyst confirmed the result of XRPD. Degradation kinetics
were monitored by ultra-fast liquid chromatography with diode array detection. The results showed
that in individual solutions, photocatalytic degradation of MET and NAD was relatively insignificant
(<10%). However, in the PIN case, the degradation was significant (64%). In the mixture, the
photodegradation efficiency of MET and NAD slightly increased (15% and 13%). Conversely, it
reduced the PIN to the still satisfactory value of 40%. Computational analysis based on molecular and
periodic density functional theory calculations was used to complement our experimental findings.
Calculations of the average local ionization energy indicate that the PIN is the most reactive of all
three considered molecules in terms of removing an electron from it.",
publisher = "MDPI",
journal = "Molecules",
title = "Photocatalytic Activity of the V2O5 Catalyst toward Selected
Pharmaceuticals and Their Mixture: Influence of the Molecular
Structure on the Efficiency of the Process",
pages = "18-1",
volume = "28",
doi = "10.3390/molecules28020655"
}

Armaković, S. J., Jovanoski Kostić, A., Bilić, A., Savanović, M. M., Tomić, N., Kremenović, A., Šćepanović, M., Grujić-Brojčin, M., Ćirković, J.,& Armaković, S.. (2023). Photocatalytic Activity of the V2O5 Catalyst toward Selected
Pharmaceuticals and Their Mixture: Influence of the Molecular
Structure on the Efficiency of the Process. in Molecules
MDPI., 28, 1-18.
https://doi.org/10.3390/molecules28020655

Armaković SJ, Jovanoski Kostić A, Bilić A, Savanović MM, Tomić N, Kremenović A, Šćepanović M, Grujić-Brojčin M, Ćirković J, Armaković S. Photocatalytic Activity of the V2O5 Catalyst toward Selected
Pharmaceuticals and Their Mixture: Influence of the Molecular
Structure on the Efficiency of the Process. in Molecules. 2023;28:1-18.
doi:10.3390/molecules28020655 .

Armaković,Sanja J., Jovanoski Kostić,Aleksandra, Bilić,Andrijana, Savanović,Maria M., Tomić,Nataša, Kremenović,Aleksandar, Šćepanović,Maja, Grujić-Brojčin,Mirjana, Ćirković, Jovana, Armaković,Stevan, "Photocatalytic Activity of the V2O5 Catalyst toward Selected
Pharmaceuticals and Their Mixture: Influence of the Molecular
Structure on the Efficiency of the Process" in Molecules, 28 (2023):1-18,
https://doi.org/10.3390/molecules28020655 . .

TY  - CONF
AU  - Živojinović, Jelena
AU  - Kosanović, Darko
AU  - Blagojevic, Vladimir
AU  - Pavlović, Vera
AU  - Ćirković, Jovana
AU  - Pavlović, Vladimir
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2946
AB  - Manganese doped SrTiO3 powders with various manganese dioxide weight percentages in the range of 1.5, 3 and 6 wp% were prepared by a solid-state method in the presence of mechanical activation (10, 30 and 120 minutes). A systematic investigation by X-ray diffraction (XRD), scanning electron microscopy (SEM), particle size analisys (PSA), Brunauer-Emmett-Teller (BET) methods and Raman spectroscopy has been undertaken to evaluate the role of dopants on the microstructural and morphological study of the perovskite oxide obtained. The optical properties of the different manganese doped and activated SrTiO3 powders have been also evaluated. Mn insertion in SrTiO3 is discussed considering the possibility for Mn ions to occupy both Ti4+ and Sr2+ sites as well as manganese segregation and Mn incorporation-related non-homogeneities. The results demonstrated that Mn has substituted into the lattice and surface layers of the particles of SrTiO3 powders and the absorption onset shifted to higher values of wavelengths with increasing time of activation and dopant concentration. The lowest value of the band gap (Eg=3.10 eV) was registered with the longest activation for 120 minutes and the highest concentration of dopant (6 wp%). Combining doping with mechanical activation lower values of band gap can be achieved and that fact could be used in subsequent studies to make Mn-SrTiO3 more suitable visible-light photocatalysts.
PB  - Belgrade : Innovation Center of Faculty of Mechanical Engineering
C3  - The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2022
T1  - Influence of MN doping on the evolution of microstructure and optical properties of mechanically activated SrTiO3 powders
SP  - 82
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2946
ER  - 

@conference{
author = "Živojinović, Jelena and Kosanović, Darko and Blagojevic, Vladimir and Pavlović, Vera and Ćirković, Jovana and Pavlović, Vladimir",
year = "2022",
abstract = "Manganese doped SrTiO3 powders with various manganese dioxide weight percentages in the range of 1.5, 3 and 6 wp% were prepared by a solid-state method in the presence of mechanical activation (10, 30 and 120 minutes). A systematic investigation by X-ray diffraction (XRD), scanning electron microscopy (SEM), particle size analisys (PSA), Brunauer-Emmett-Teller (BET) methods and Raman spectroscopy has been undertaken to evaluate the role of dopants on the microstructural and morphological study of the perovskite oxide obtained. The optical properties of the different manganese doped and activated SrTiO3 powders have been also evaluated. Mn insertion in SrTiO3 is discussed considering the possibility for Mn ions to occupy both Ti4+ and Sr2+ sites as well as manganese segregation and Mn incorporation-related non-homogeneities. The results demonstrated that Mn has substituted into the lattice and surface layers of the particles of SrTiO3 powders and the absorption onset shifted to higher values of wavelengths with increasing time of activation and dopant concentration. The lowest value of the band gap (Eg=3.10 eV) was registered with the longest activation for 120 minutes and the highest concentration of dopant (6 wp%). Combining doping with mechanical activation lower values of band gap can be achieved and that fact could be used in subsequent studies to make Mn-SrTiO3 more suitable visible-light photocatalysts.",
publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering",
journal = "The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2022",
title = "Influence of MN doping on the evolution of microstructure and optical properties of mechanically activated SrTiO3 powders",
pages = "82",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2946"
}

Živojinović, J., Kosanović, D., Blagojevic, V., Pavlović, V., Ćirković, J.,& Pavlović, V.. (2022). Influence of MN doping on the evolution of microstructure and optical properties of mechanically activated SrTiO3 powders. in The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2022
Belgrade : Innovation Center of Faculty of Mechanical Engineering., 82.
https://hdl.handle.net/21.15107/rcub_rimsi_2946

Živojinović J, Kosanović D, Blagojevic V, Pavlović V, Ćirković J, Pavlović V. Influence of MN doping on the evolution of microstructure and optical properties of mechanically activated SrTiO3 powders. in The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2022. 2022;:82.
https://hdl.handle.net/21.15107/rcub_rimsi_2946 .

Živojinović, Jelena, Kosanović, Darko, Blagojevic, Vladimir, Pavlović, Vera, Ćirković, Jovana, Pavlović, Vladimir, "Influence of MN doping on the evolution of microstructure and optical properties of mechanically activated SrTiO3 powders" in The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2022 (2022):82,
https://hdl.handle.net/21.15107/rcub_rimsi_2946 .

TY  - CONF
AU  - Radojković, Aleksandar
AU  - Luković Golić, Danijela
AU  - JOVIĆ ORSINI, Nataša
AU  - Ćirković, Jovana
AU  - Branković, Zorica
AU  - Branković, Goran
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1738
AB  - BiFeO3 is one of the few multiferroic perovskites that exhibits magnetic and ferroelectric properties
at room temperature. However, it is also distinguished by high leakage current, low remnant electric
and magnetic polarization, and high electric coercive field. These features keep it away from any practical
use in electronics. Therefore, many attempts have been made to improve the properties of BiFeO3 by
Bi- or Fe-site doping or by both. Previous investigations suggest that doping with Nbat Fe-site can
positively affect the magnetic behavior of BiFeO3 and decrease the leakage current.
In this study, various cation substitutions at Bi-site (La3+, Eu3+) and Fe-site (Nb5+, Zr4+) were examined
to investigate their possible synergism and benefit for the ferroelectric properties. The role of the cations
with higher valence is to suppress the formation of structural defects during synthesis, such as oxygen
and bismuth vacancies. These defects are responsible for high leakage currents and, consequently, low
breakdown voltages characteristic of the pure BiFeO3. On the other hand, rare earth cations at the Bisite
usually enable densification of the ceramics in a wider range of temperatures, preventing bismuth
loss and forming defects and secondary phases during sintering. However, do pant concentrations above
10–15mol% may give rise to transition from polar, rhombohedral (R3c) to non-polar, orthorhombic
(Pnma) symmetry.
The carefully selected compositions of doped BiFeO3 were synthesized by a simple hydro-evaporation
method. The ceramics samples were characterized using X-ray diffraction (XRD) analysis, scanning
electron microscopy (SEM), and polarization techniques, including leakage current measurements.
Although the introduction of Nb5+or Zr4+decreased the leakage current, they surprisingly deteriorated
the ferroelectric properties even at concentrations as low as 1 mol%. This effect was more pronounced for
the samples containing Nb. On the contrary, both La3+ and Eu3+ (incorporated at the Bi-site) improved
the ferroelectric properties as their concentrations increased. The La-doped samples exhibited higher
remnant electric polarizations at observed electric fields. The highest remnant electric polarization of31.9
μC/cm2at 150 kV/cm was measured for Bi0.85La0.15Fe0.998Zr0.002O3, indicating the synergetic
effect of La3+ and Zr4+, which is limited to very low Zr4+concentrations.
PB  - Linkin Science Pvt. Ltd
C3  - 5TH EDITION OF NANOTECHNOLOGY, NANOMEDICINE & OPTICS PHOTONICS HYBRID CONFERENCE
T1  - Ferroelectric properties of BiFeO3 ceramics with cation substitutions at Bi-site (La3+, Eu3+) and Fe-site (Nb5+, Zr4+)
SP  - 10
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1738
ER  - 

@conference{
author = "Radojković, Aleksandar and Luković Golić, Danijela and JOVIĆ ORSINI, Nataša and Ćirković, Jovana and Branković, Zorica and Branković, Goran",
year = "2022",
abstract = "BiFeO3 is one of the few multiferroic perovskites that exhibits magnetic and ferroelectric properties
at room temperature. However, it is also distinguished by high leakage current, low remnant electric
and magnetic polarization, and high electric coercive field. These features keep it away from any practical
use in electronics. Therefore, many attempts have been made to improve the properties of BiFeO3 by
Bi- or Fe-site doping or by both. Previous investigations suggest that doping with Nbat Fe-site can
positively affect the magnetic behavior of BiFeO3 and decrease the leakage current.
In this study, various cation substitutions at Bi-site (La3+, Eu3+) and Fe-site (Nb5+, Zr4+) were examined
to investigate their possible synergism and benefit for the ferroelectric properties. The role of the cations
with higher valence is to suppress the formation of structural defects during synthesis, such as oxygen
and bismuth vacancies. These defects are responsible for high leakage currents and, consequently, low
breakdown voltages characteristic of the pure BiFeO3. On the other hand, rare earth cations at the Bisite
usually enable densification of the ceramics in a wider range of temperatures, preventing bismuth
loss and forming defects and secondary phases during sintering. However, do pant concentrations above
10–15mol% may give rise to transition from polar, rhombohedral (R3c) to non-polar, orthorhombic
(Pnma) symmetry.
The carefully selected compositions of doped BiFeO3 were synthesized by a simple hydro-evaporation
method. The ceramics samples were characterized using X-ray diffraction (XRD) analysis, scanning
electron microscopy (SEM), and polarization techniques, including leakage current measurements.
Although the introduction of Nb5+or Zr4+decreased the leakage current, they surprisingly deteriorated
the ferroelectric properties even at concentrations as low as 1 mol%. This effect was more pronounced for
the samples containing Nb. On the contrary, both La3+ and Eu3+ (incorporated at the Bi-site) improved
the ferroelectric properties as their concentrations increased. The La-doped samples exhibited higher
remnant electric polarizations at observed electric fields. The highest remnant electric polarization of31.9
μC/cm2at 150 kV/cm was measured for Bi0.85La0.15Fe0.998Zr0.002O3, indicating the synergetic
effect of La3+ and Zr4+, which is limited to very low Zr4+concentrations.",
publisher = "Linkin Science Pvt. Ltd",
journal = "5TH EDITION OF NANOTECHNOLOGY, NANOMEDICINE & OPTICS PHOTONICS HYBRID CONFERENCE",
title = "Ferroelectric properties of BiFeO3 ceramics with cation substitutions at Bi-site (La3+, Eu3+) and Fe-site (Nb5+, Zr4+)",
pages = "10",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1738"
}

Radojković, A., Luković Golić, D., JOVIĆ ORSINI, N., Ćirković, J., Branković, Z.,& Branković, G.. (2022). Ferroelectric properties of BiFeO3 ceramics with cation substitutions at Bi-site (La3+, Eu3+) and Fe-site (Nb5+, Zr4+). in 5TH EDITION OF NANOTECHNOLOGY, NANOMEDICINE & OPTICS PHOTONICS HYBRID CONFERENCE
Linkin Science Pvt. Ltd., 10.
https://hdl.handle.net/21.15107/rcub_rimsi_1738

Radojković A, Luković Golić D, JOVIĆ ORSINI N, Ćirković J, Branković Z, Branković G. Ferroelectric properties of BiFeO3 ceramics with cation substitutions at Bi-site (La3+, Eu3+) and Fe-site (Nb5+, Zr4+). in 5TH EDITION OF NANOTECHNOLOGY, NANOMEDICINE & OPTICS PHOTONICS HYBRID CONFERENCE. 2022;:10.
https://hdl.handle.net/21.15107/rcub_rimsi_1738 .

Radojković, Aleksandar, Luković Golić, Danijela, JOVIĆ ORSINI, Nataša, Ćirković, Jovana, Branković, Zorica, Branković, Goran, "Ferroelectric properties of BiFeO3 ceramics with cation substitutions at Bi-site (La3+, Eu3+) and Fe-site (Nb5+, Zr4+)" in 5TH EDITION OF NANOTECHNOLOGY, NANOMEDICINE & OPTICS PHOTONICS HYBRID CONFERENCE (2022):10,
https://hdl.handle.net/21.15107/rcub_rimsi_1738 .

TY  - JOUR
AU  - Tasić, Nikola
AU  - Ćirković, Jovana
AU  - Ribić, Vesna
AU  - Žunić, Milan
AU  - Dapčević, Aleksandra
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1517
AB  - We present the synthesis and photocatalytic properties of mixed-phase TiO2 nanoparticles decorated with silver nanodots obtained by environmental-friendly wet chemical method using low molecular weight chitosan as the silver reducing agent. Structural analysis of synthesized Ag nanoparticles revealed that they crystallized in a rare hexagonal modification. High-resolution transmission electron microscopy study shows that  lt 3-nm hexagonal-Ag nanoparticles are implanted on the surface of  lt 20-nm anatase grains. Compared to Ag-free TiO2 powders, implantation with Ag results in important increase in visible light absorption. The photocatalytic activity of the samples was measured by monitoring decolorization of concentrated textile dye solution (50 mg L-1 of Reactive Orange 16) under simulated solar irradiation of 280 W m(-2). The optimum photocatalytic properties are achieved with 5 wt% of silver. Based on the collected results, the operating mechanism of the degradation process is suggested, and the effects of the silver addition are explained.
PB  - Wiley, Hoboken
T2  - Journal of the American Ceramic Society
T1  - Effects of the silver nanodots on the photocatalytic activity of mixed-phase TiO2
EP  - 347
IS  - 1
SP  - 336
VL  - 105
DO  - 10.1111/jace.18059
ER  - 

@article{
author = "Tasić, Nikola and Ćirković, Jovana and Ribić, Vesna and Žunić, Milan and Dapčević, Aleksandra and Branković, Goran and Branković, Zorica",
year = "2022",
abstract = "We present the synthesis and photocatalytic properties of mixed-phase TiO2 nanoparticles decorated with silver nanodots obtained by environmental-friendly wet chemical method using low molecular weight chitosan as the silver reducing agent. Structural analysis of synthesized Ag nanoparticles revealed that they crystallized in a rare hexagonal modification. High-resolution transmission electron microscopy study shows that  lt 3-nm hexagonal-Ag nanoparticles are implanted on the surface of  lt 20-nm anatase grains. Compared to Ag-free TiO2 powders, implantation with Ag results in important increase in visible light absorption. The photocatalytic activity of the samples was measured by monitoring decolorization of concentrated textile dye solution (50 mg L-1 of Reactive Orange 16) under simulated solar irradiation of 280 W m(-2). The optimum photocatalytic properties are achieved with 5 wt% of silver. Based on the collected results, the operating mechanism of the degradation process is suggested, and the effects of the silver addition are explained.",
publisher = "Wiley, Hoboken",
journal = "Journal of the American Ceramic Society",
title = "Effects of the silver nanodots on the photocatalytic activity of mixed-phase TiO2",
pages = "347-336",
number = "1",
volume = "105",
doi = "10.1111/jace.18059"
}

Tasić, N., Ćirković, J., Ribić, V., Žunić, M., Dapčević, A., Branković, G.,& Branković, Z.. (2022). Effects of the silver nanodots on the photocatalytic activity of mixed-phase TiO2. in Journal of the American Ceramic Society
Wiley, Hoboken., 105(1), 336-347.
https://doi.org/10.1111/jace.18059

Tasić N, Ćirković J, Ribić V, Žunić M, Dapčević A, Branković G, Branković Z. Effects of the silver nanodots on the photocatalytic activity of mixed-phase TiO2. in Journal of the American Ceramic Society. 2022;105(1):336-347.
doi:10.1111/jace.18059 .

Tasić, Nikola, Ćirković, Jovana, Ribić, Vesna, Žunić, Milan, Dapčević, Aleksandra, Branković, Goran, Branković, Zorica, "Effects of the silver nanodots on the photocatalytic activity of mixed-phase TiO2" in Journal of the American Ceramic Society, 105, no. 1 (2022):336-347,
https://doi.org/10.1111/jace.18059 . .

TY  - CONF
AU  - Jelić, Stefan
AU  - Ćirković, Jovana
AU  - Jovanović, Jelena
AU  - Radojković, Aleksandar
AU  - Novaković, Tatjana
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1776
AB  - The BiVO4 sample was successfully synthesized from a mixture of ammonium vanadate, bismuth(III) nitrate, and nitric acid exposed to ultrasound irradiation. Structure, microstructure and optical properties of the obtained BiVO4 nanopowder were investigated. X-ray diffraction (XRD) analysis confirmed single phase monoclinic lattice system with average crystallite size of 50 nm in diameter. Scanning electron microscopy (SEM) micrographs revealed the tendency of crystallites to agglomerate forming larger irregular sub-micron spheres. Brunauer-Emmett-Teller (BET) method was used to estimate the specific surface area of the sample and determine pore shape and size. UV–vis spectroscopy measurements have revealed favorably high absorbance of the visible light with the calculated band-gap value of 2.48 eV. Calculated values of valence and conducting band energies are +2.77 eV and +0.29 eV respectively, suggested that BiVO4 can be used for photocatalytic degradation under sunlight irradiation as evident from the UV–vis spectrum.
PB  - Institut za multidisciplinarna istraživanja Kneza Višeslava 1, 11000 Belgrade, Serbia
C3  - The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia
T1  - Ultrasonic synthesis and characterization of mesoporous monoclinic BiVO4 nanopowder
SP  - 64
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1776
ER  - 

@conference{
author = "Jelić, Stefan and Ćirković, Jovana and Jovanović, Jelena and Radojković, Aleksandar and Novaković, Tatjana and Branković, Goran and Branković, Zorica",
year = "2022",
abstract = "The BiVO4 sample was successfully synthesized from a mixture of ammonium vanadate, bismuth(III) nitrate, and nitric acid exposed to ultrasound irradiation. Structure, microstructure and optical properties of the obtained BiVO4 nanopowder were investigated. X-ray diffraction (XRD) analysis confirmed single phase monoclinic lattice system with average crystallite size of 50 nm in diameter. Scanning electron microscopy (SEM) micrographs revealed the tendency of crystallites to agglomerate forming larger irregular sub-micron spheres. Brunauer-Emmett-Teller (BET) method was used to estimate the specific surface area of the sample and determine pore shape and size. UV–vis spectroscopy measurements have revealed favorably high absorbance of the visible light with the calculated band-gap value of 2.48 eV. Calculated values of valence and conducting band energies are +2.77 eV and +0.29 eV respectively, suggested that BiVO4 can be used for photocatalytic degradation under sunlight irradiation as evident from the UV–vis spectrum.",
publisher = "Institut za multidisciplinarna istraživanja Kneza Višeslava 1, 11000 Belgrade, Serbia",
journal = "The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia",
title = "Ultrasonic synthesis and characterization of mesoporous monoclinic BiVO4 nanopowder",
pages = "64",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1776"
}

Jelić, S., Ćirković, J., Jovanović, J., Radojković, A., Novaković, T., Branković, G.,& Branković, Z.. (2022). Ultrasonic synthesis and characterization of mesoporous monoclinic BiVO4 nanopowder. in The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia
Institut za multidisciplinarna istraživanja Kneza Višeslava 1, 11000 Belgrade, Serbia., 64.
https://hdl.handle.net/21.15107/rcub_rimsi_1776

Jelić S, Ćirković J, Jovanović J, Radojković A, Novaković T, Branković G, Branković Z. Ultrasonic synthesis and characterization of mesoporous monoclinic BiVO4 nanopowder. in The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia. 2022;:64.
https://hdl.handle.net/21.15107/rcub_rimsi_1776 .

Jelić, Stefan, Ćirković, Jovana, Jovanović, Jelena, Radojković, Aleksandar, Novaković, Tatjana, Branković, Goran, Branković, Zorica, "Ultrasonic synthesis and characterization of mesoporous monoclinic BiVO4 nanopowder" in The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia (2022):64,
https://hdl.handle.net/21.15107/rcub_rimsi_1776 .

TY  - CONF
AU  - Jovanović, Jelena
AU  - Jelić, Stefan
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1751
AB  - The photocatalytic degradation of highly toxic azo dye Mordant Blue 9 (MB 9) was investigated using single-phase monoclinic BiVO4 nanopowder as a photocatalyst under the simulated solar irradiation. The photodegradation process as a function of different pH values of aqueous dye solution (pH = 1 – 13) and irradiation time was investigated, and the complete degradation mechanism was proposed. MB 9 was resistant to direct photolysis and the BiVO4 nanoparticles exhibited higher photocatalytic activity in a basic medium than in neutral and acid media. Photodegradation of the dye molecules occurred primarily due to a reaction with the photo-generated holes and OH– anions forming ∙OH radicals. The alkaline pH range favors the formation of more ∙OH radicals through the oxidation of hydroxide ions existing at the BiVO4 surface, thus the effectiveness of the photocatalytic process significantly increased. BiVO4 photocatalyst was stable and active under simulated solar irradiation over four consecutive cycles, which confirms its good photocatalytic properties.
PB  - Institut za multidisciplinarna istraživanja Kneza Višeslava 1, 11000 Belgrade, Serbia
C3  - The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia
T1  - Visible-light photocatalytic degradation of mordant blue 9 by BiVO4 nanopowder
VL  - 55
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1751
ER  - 

@conference{
author = "Jovanović, Jelena and Jelić, Stefan and Ćirković, Jovana and Radojković, Aleksandar and Branković, Goran and Branković, Zorica",
year = "2022",
abstract = "The photocatalytic degradation of highly toxic azo dye Mordant Blue 9 (MB 9) was investigated using single-phase monoclinic BiVO4 nanopowder as a photocatalyst under the simulated solar irradiation. The photodegradation process as a function of different pH values of aqueous dye solution (pH = 1 – 13) and irradiation time was investigated, and the complete degradation mechanism was proposed. MB 9 was resistant to direct photolysis and the BiVO4 nanoparticles exhibited higher photocatalytic activity in a basic medium than in neutral and acid media. Photodegradation of the dye molecules occurred primarily due to a reaction with the photo-generated holes and OH– anions forming ∙OH radicals. The alkaline pH range favors the formation of more ∙OH radicals through the oxidation of hydroxide ions existing at the BiVO4 surface, thus the effectiveness of the photocatalytic process significantly increased. BiVO4 photocatalyst was stable and active under simulated solar irradiation over four consecutive cycles, which confirms its good photocatalytic properties.",
publisher = "Institut za multidisciplinarna istraživanja Kneza Višeslava 1, 11000 Belgrade, Serbia",
journal = "The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia",
title = "Visible-light photocatalytic degradation of mordant blue 9 by BiVO4 nanopowder",
volume = "55",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1751"
}

Jovanović, J., Jelić, S., Ćirković, J., Radojković, A., Branković, G.,& Branković, Z.. (2022). Visible-light photocatalytic degradation of mordant blue 9 by BiVO4 nanopowder. in The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia
Institut za multidisciplinarna istraživanja Kneza Višeslava 1, 11000 Belgrade, Serbia., 55.
https://hdl.handle.net/21.15107/rcub_rimsi_1751

Jovanović J, Jelić S, Ćirković J, Radojković A, Branković G, Branković Z. Visible-light photocatalytic degradation of mordant blue 9 by BiVO4 nanopowder. in The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia. 2022;55.
https://hdl.handle.net/21.15107/rcub_rimsi_1751 .

Jovanović, Jelena, Jelić, Stefan, Ćirković, Jovana, Radojković, Aleksandar, Branković, Goran, Branković, Zorica, "Visible-light photocatalytic degradation of mordant blue 9 by BiVO4 nanopowder" in The 6 th Conference of The Serbian Society for Ceramic Materials: 6CSCS-2022, Belgrade, Serbia, 55 (2022),
https://hdl.handle.net/21.15107/rcub_rimsi_1751 .

TY  - CONF
AU  - Jovanović, Jelena
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Joksimović, Kristina
AU  - Omerović, Nejra
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1740
AB  - The subject of this research was the development of biodegradable and eco-friendly material based on natural biopolymers from renewable sources, with the addition of active components for application in active food packaging. The main principle was the incorporation of the active components (lemongrass (Cymbopogon citratus L.) essential oil, ZnO nanoparticles, or Zn(CH3COO)2∙2H2O) with antimicrobial activity in the polymer matrix (chitosan, pectin, and gelatin), and their slow release during the time. All of the used components are listed as GRAS (Generally Recognized as Safe) by the U.S. Food and Drug Administration. Different formulations of emulsions and dispersions were processed for mutual comparison. The stability of chitosan and pectin emulsions was determined by using laser diffraction methods. Chitosan emulsions exhibited higher stability during 30 days of storage. The chitosan emulsions and dispersions exhibited a higher antibacterial effect in vitro against Escherichia coli, Bacillus subtilis, and Staphylococcus aureus. Biopolymer coatings were formed by the spraying of emulsions on existing packaging. The effects of biopolymer coatings on the development of microorganisms on fresh raspberries (Rubus idaeus L.) were performed in vivo during eight days of raspberry storage at refrigerator temperature. The tested coatings extended the shelf life of stored raspberries from four to eight days. The synergistic effect between lemongrass essential oil and ZnO nanoparticles or Zn(CH3COO)2∙2H2O was observed both in vivo and in vitro.
PB  - University of Novi Sad, Faculty of Technology Novi Sad
C3  - 2nd International Conference on Advanced Production and Processing (ICAPP), Novi Sad, Serbia
T1  - CHITOSAN- AND PECTIN-BASED COATINGS WITH
INCORPORATED ACTIVE COMPONENTS FOR APPLICATION IN
ACTIVE FOOD PACKAGING
SP  - 115
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1740
ER  - 

@conference{
author = "Jovanović, Jelena and Ćirković, Jovana and Radojković, Aleksandar and Joksimović, Kristina and Omerović, Nejra and Branković, Goran and Branković, Zorica",
year = "2022",
abstract = "The subject of this research was the development of biodegradable and eco-friendly material based on natural biopolymers from renewable sources, with the addition of active components for application in active food packaging. The main principle was the incorporation of the active components (lemongrass (Cymbopogon citratus L.) essential oil, ZnO nanoparticles, or Zn(CH3COO)2∙2H2O) with antimicrobial activity in the polymer matrix (chitosan, pectin, and gelatin), and their slow release during the time. All of the used components are listed as GRAS (Generally Recognized as Safe) by the U.S. Food and Drug Administration. Different formulations of emulsions and dispersions were processed for mutual comparison. The stability of chitosan and pectin emulsions was determined by using laser diffraction methods. Chitosan emulsions exhibited higher stability during 30 days of storage. The chitosan emulsions and dispersions exhibited a higher antibacterial effect in vitro against Escherichia coli, Bacillus subtilis, and Staphylococcus aureus. Biopolymer coatings were formed by the spraying of emulsions on existing packaging. The effects of biopolymer coatings on the development of microorganisms on fresh raspberries (Rubus idaeus L.) were performed in vivo during eight days of raspberry storage at refrigerator temperature. The tested coatings extended the shelf life of stored raspberries from four to eight days. The synergistic effect between lemongrass essential oil and ZnO nanoparticles or Zn(CH3COO)2∙2H2O was observed both in vivo and in vitro.",
publisher = "University of Novi Sad, Faculty of Technology Novi Sad",
journal = "2nd International Conference on Advanced Production and Processing (ICAPP), Novi Sad, Serbia",
title = "CHITOSAN- AND PECTIN-BASED COATINGS WITH
INCORPORATED ACTIVE COMPONENTS FOR APPLICATION IN
ACTIVE FOOD PACKAGING",
pages = "115",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1740"
}

Jovanović, J., Ćirković, J., Radojković, A., Joksimović, K., Omerović, N., Branković, G.,& Branković, Z.. (2022). CHITOSAN- AND PECTIN-BASED COATINGS WITH
INCORPORATED ACTIVE COMPONENTS FOR APPLICATION IN
ACTIVE FOOD PACKAGING. in 2nd International Conference on Advanced Production and Processing (ICAPP), Novi Sad, Serbia
University of Novi Sad, Faculty of Technology Novi Sad., 115.
https://hdl.handle.net/21.15107/rcub_rimsi_1740

Jovanović J, Ćirković J, Radojković A, Joksimović K, Omerović N, Branković G, Branković Z. CHITOSAN- AND PECTIN-BASED COATINGS WITH
INCORPORATED ACTIVE COMPONENTS FOR APPLICATION IN
ACTIVE FOOD PACKAGING. in 2nd International Conference on Advanced Production and Processing (ICAPP), Novi Sad, Serbia. 2022;:115.
https://hdl.handle.net/21.15107/rcub_rimsi_1740 .

Jovanović, Jelena, Ćirković, Jovana, Radojković, Aleksandar, Joksimović, Kristina, Omerović, Nejra, Branković, Goran, Branković, Zorica, "CHITOSAN- AND PECTIN-BASED COATINGS WITH
INCORPORATED ACTIVE COMPONENTS FOR APPLICATION IN
ACTIVE FOOD PACKAGING" in 2nd International Conference on Advanced Production and Processing (ICAPP), Novi Sad, Serbia (2022):115,
https://hdl.handle.net/21.15107/rcub_rimsi_1740 .

TY  - JOUR
AU  - Milićević, Z.
AU  - Krnjajić, Slobodan
AU  - Stević, M.
AU  - Ćirković, Jovana
AU  - Jelušić, Aleksandra
AU  - Pucarević, M.
AU  - Popović, Tatjana
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1549
AB  - In this work by encapsulation technique we have synthetized three new clove bud essential oil (CEO) Emulsifiable Concentrate (EC) formulations depending on the carrier (synthetic zeolite-F-CSZ, nature zeolite-F-CNZ and gelatin-F-CG). The main idea was to develop an eco-friendly biopesticide that can find use in plant protection as an alternative to the use of conventional pesticides. By encapsulation we wanted to enable water solubility and ensure prolonged efficacy of the essential oil. Biological activity of designed CEO formulations was tested on potato tuber moth Phthorimaea operculella (fumigant mode of action), gray mold fungal pathogen Botrytis cinerea (preserver coatings), and soft rotting bacterial pathogens Pectobacterium carotovorum (subsp. carotovorum and brasiliensis) and Dickeya dianthicola (direct competition). CEO formulations evinced a prolonged action on mortality of P. operculella during the insects’ exposure to the concentration of the emulsions of 40 µL L−1 air. The mortality gradually decreased from a probability of 100% after the first 24 h to 50% after 5 days for F-CSZ or after 4 days for F-CNZ and F-CG. The most promising formulation is F-CSZ enabling activity during 14 days of exposure, while the effect of the other two formulations lasted 10 days. All three formulations produced a strong fungicidal effect against B. cinerea by preventing infection and disease development. The best efficacy was evidenced with F-CSZ (synthetic zeolite as a carrier) showing 100% efficacy when it was used even at the lowest tested concentration of active CEO (1%). The results of in vitro testing against soft rot pathogens determined the MIC value of CEO formulations to be 1% of active CEO. By this research, we present a novel perspective on the use of essential oils as an alternative, environmental biopesticide. CEO formulations can be commercially exploited as a fumigant or preserver coatings to extend the shelf life of stored products or the fresh-fruit market.
PB  - MDPI
T2  - Agriculture (Switzerland)
T1  - Encapsulated Clove Bud Essential Oil: A New Perspective as an Eco-Friendly Biopesticide
IS  - 3
VL  - 12
DO  - 10.3390/agriculture12030338
ER  - 

@article{
author = "Milićević, Z. and Krnjajić, Slobodan and Stević, M. and Ćirković, Jovana and Jelušić, Aleksandra and Pucarević, M. and Popović, Tatjana",
year = "2022",
abstract = "In this work by encapsulation technique we have synthetized three new clove bud essential oil (CEO) Emulsifiable Concentrate (EC) formulations depending on the carrier (synthetic zeolite-F-CSZ, nature zeolite-F-CNZ and gelatin-F-CG). The main idea was to develop an eco-friendly biopesticide that can find use in plant protection as an alternative to the use of conventional pesticides. By encapsulation we wanted to enable water solubility and ensure prolonged efficacy of the essential oil. Biological activity of designed CEO formulations was tested on potato tuber moth Phthorimaea operculella (fumigant mode of action), gray mold fungal pathogen Botrytis cinerea (preserver coatings), and soft rotting bacterial pathogens Pectobacterium carotovorum (subsp. carotovorum and brasiliensis) and Dickeya dianthicola (direct competition). CEO formulations evinced a prolonged action on mortality of P. operculella during the insects’ exposure to the concentration of the emulsions of 40 µL L−1 air. The mortality gradually decreased from a probability of 100% after the first 24 h to 50% after 5 days for F-CSZ or after 4 days for F-CNZ and F-CG. The most promising formulation is F-CSZ enabling activity during 14 days of exposure, while the effect of the other two formulations lasted 10 days. All three formulations produced a strong fungicidal effect against B. cinerea by preventing infection and disease development. The best efficacy was evidenced with F-CSZ (synthetic zeolite as a carrier) showing 100% efficacy when it was used even at the lowest tested concentration of active CEO (1%). The results of in vitro testing against soft rot pathogens determined the MIC value of CEO formulations to be 1% of active CEO. By this research, we present a novel perspective on the use of essential oils as an alternative, environmental biopesticide. CEO formulations can be commercially exploited as a fumigant or preserver coatings to extend the shelf life of stored products or the fresh-fruit market.",
publisher = "MDPI",
journal = "Agriculture (Switzerland)",
title = "Encapsulated Clove Bud Essential Oil: A New Perspective as an Eco-Friendly Biopesticide",
number = "3",
volume = "12",
doi = "10.3390/agriculture12030338"
}

Milićević, Z., Krnjajić, S., Stević, M., Ćirković, J., Jelušić, A., Pucarević, M.,& Popović, T.. (2022). Encapsulated Clove Bud Essential Oil: A New Perspective as an Eco-Friendly Biopesticide. in Agriculture (Switzerland)
MDPI., 12(3).
https://doi.org/10.3390/agriculture12030338

Milićević Z, Krnjajić S, Stević M, Ćirković J, Jelušić A, Pucarević M, Popović T. Encapsulated Clove Bud Essential Oil: A New Perspective as an Eco-Friendly Biopesticide. in Agriculture (Switzerland). 2022;12(3).
doi:10.3390/agriculture12030338 .

Milićević, Z., Krnjajić, Slobodan, Stević, M., Ćirković, Jovana, Jelušić, Aleksandra, Pucarević, M., Popović, Tatjana, "Encapsulated Clove Bud Essential Oil: A New Perspective as an Eco-Friendly Biopesticide" in Agriculture (Switzerland), 12, no. 3 (2022),
https://doi.org/10.3390/agriculture12030338 . .

TY  - JOUR
AU  - Jakubauskas, Gediminas
AU  - Gilic, Martina
AU  - Paluckiene, Edita
AU  - Mitric, Jelena
AU  - Ćirković, Jovana
AU  - Ralevic, Uros
AU  - Usoviene, Egle
AU  - Griskonis, Egidijus
AU  - Petrasauskiene, Neringa
PY  - 2022
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1571
AB  - Thin copper selenide films were synthesized on polyamide sheets using the successive ionic layer adsorption and reaction (SILAR) method at three different temperatures. It was found that elevating the temperature of the solution led to the creation of copper selenide films with different features. X-ray diffraction characterization revealed that all films crystallized into a cubic Cu2−xSe, but with different crystallinity parameters. With elevating the temperature, grain size increased (6.61–14.33 and 15.81 for 40, 60 and 80 °C, respectively), while dislocation density and the strain decreased. Surface topology was investigated with Scanning Electron Microscopy and Atomic Force Microscopy, which revealed that the grains combined into agglomerates of up to 100 nm (80 °C) to 1 μm (40 °C). The value of the direct band gap of the copper selenide thin films, obtained with UV/VIS spectroscopy, varied in the range of 2.28–1.98 eV. The formation of Cu2−xSe was confirmed by Raman analysis; the most prominent Raman peak is located at 260 cm−1, which is attributed to binary copper selenides. The thin Cu2−xSe films deposited on polyamide showed p-type conductivity, and the electrical resistivity varied in the range of 20–50 Ω. Our results suggest that elevated temperatures prevent large agglomeration, leading to higher resistance behavior.
PB  - MDPI
T2  - Chemosensors
T1  - Characterization of Flexible Copper Selenide Films on Polyamide Substrate Obtained by SILAR Method—Towards Application in Electronic Devices
IS  - 8
SP  - 313
VL  - 10
DO  - 10.3390/chemosensors10080313
ER  - 

@article{
author = "Jakubauskas, Gediminas and Gilic, Martina and Paluckiene, Edita and Mitric, Jelena and Ćirković, Jovana and Ralevic, Uros and Usoviene, Egle and Griskonis, Egidijus and Petrasauskiene, Neringa",
year = "2022",
abstract = "Thin copper selenide films were synthesized on polyamide sheets using the successive ionic layer adsorption and reaction (SILAR) method at three different temperatures. It was found that elevating the temperature of the solution led to the creation of copper selenide films with different features. X-ray diffraction characterization revealed that all films crystallized into a cubic Cu2−xSe, but with different crystallinity parameters. With elevating the temperature, grain size increased (6.61–14.33 and 15.81 for 40, 60 and 80 °C, respectively), while dislocation density and the strain decreased. Surface topology was investigated with Scanning Electron Microscopy and Atomic Force Microscopy, which revealed that the grains combined into agglomerates of up to 100 nm (80 °C) to 1 μm (40 °C). The value of the direct band gap of the copper selenide thin films, obtained with UV/VIS spectroscopy, varied in the range of 2.28–1.98 eV. The formation of Cu2−xSe was confirmed by Raman analysis; the most prominent Raman peak is located at 260 cm−1, which is attributed to binary copper selenides. The thin Cu2−xSe films deposited on polyamide showed p-type conductivity, and the electrical resistivity varied in the range of 20–50 Ω. Our results suggest that elevated temperatures prevent large agglomeration, leading to higher resistance behavior.",
publisher = "MDPI",
journal = "Chemosensors",
title = "Characterization of Flexible Copper Selenide Films on Polyamide Substrate Obtained by SILAR Method—Towards Application in Electronic Devices",
number = "8",
pages = "313",
volume = "10",
doi = "10.3390/chemosensors10080313"
}

Jakubauskas, G., Gilic, M., Paluckiene, E., Mitric, J., Ćirković, J., Ralevic, U., Usoviene, E., Griskonis, E.,& Petrasauskiene, N.. (2022). Characterization of Flexible Copper Selenide Films on Polyamide Substrate Obtained by SILAR Method—Towards Application in Electronic Devices. in Chemosensors
MDPI., 10(8), 313.
https://doi.org/10.3390/chemosensors10080313

Jakubauskas G, Gilic M, Paluckiene E, Mitric J, Ćirković J, Ralevic U, Usoviene E, Griskonis E, Petrasauskiene N. Characterization of Flexible Copper Selenide Films on Polyamide Substrate Obtained by SILAR Method—Towards Application in Electronic Devices. in Chemosensors. 2022;10(8):313.
doi:10.3390/chemosensors10080313 .

Jakubauskas, Gediminas, Gilic, Martina, Paluckiene, Edita, Mitric, Jelena, Ćirković, Jovana, Ralevic, Uros, Usoviene, Egle, Griskonis, Egidijus, Petrasauskiene, Neringa, "Characterization of Flexible Copper Selenide Films on Polyamide Substrate Obtained by SILAR Method—Towards Application in Electronic Devices" in Chemosensors, 10, no. 8 (2022):313,
https://doi.org/10.3390/chemosensors10080313 . .

TY  - JOUR
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Luković Golić, Danijela
AU  - Tasić, Nikola
AU  - Cizmic, Mirta
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1437
AB  - This paper presents a systematic study on the photocatalytic activity of single-phase BiFeO3 (BFO) nanopowder, under the simulated solar irradiation in the presence of highly polluting textile dye (Mordant Blue 9). BFO nanopowder was synthesized by the means of the ultrasound-assisted sol-gel route. The structural and morphology analyses confirmed phase-pure crystalline BFO nanopowder with particle size of 70 nm. UV-vis spectroscopy measurements have revealed favorably high absorbance of the visible light with the calculated band-gap value of 2.21 eV. Photodegradation process as a function of different pH values of dye aqueous solution (pH = 1, 6.7 and 12) and irradiation time was investigated and the complete degradation mechanism was revealed. Related photodegradation products were detected by high-performance liquid chromatography equipped with mass spectrometer (HPLC/MS-MS). BFO nanoparticles exhibited higher photocatalytic activity in the basic medium than in neutral and acidic medium. HPLC/MS-MS analysis of the solutions at pH = 1 and pH = 6.7 showed only decolorization process, with no detectable degradation products, while at pH = 12 three different degradation products were observed, and their concentration slightly decreased with time. Reusability test showed that BFO nanoparticles can be used in four successive photodegradation cycles, with no significant activity losses.
PB  - Elsevier Sci Ltd, Oxford
T2  - Journal of Environmental Chemical Engineering
T1  - Visible-light photocatalytic degradation of Mordant Blue 9 by single-phase BiFeO3 nanoparticles
IS  - 1
VL  - 9
DO  - 10.1016/j.jece.2020.104587
ER  - 

@article{
author = "Ćirković, Jovana and Radojković, Aleksandar and Luković Golić, Danijela and Tasić, Nikola and Cizmic, Mirta and Branković, Goran and Branković, Zorica",
year = "2021",
abstract = "This paper presents a systematic study on the photocatalytic activity of single-phase BiFeO3 (BFO) nanopowder, under the simulated solar irradiation in the presence of highly polluting textile dye (Mordant Blue 9). BFO nanopowder was synthesized by the means of the ultrasound-assisted sol-gel route. The structural and morphology analyses confirmed phase-pure crystalline BFO nanopowder with particle size of 70 nm. UV-vis spectroscopy measurements have revealed favorably high absorbance of the visible light with the calculated band-gap value of 2.21 eV. Photodegradation process as a function of different pH values of dye aqueous solution (pH = 1, 6.7 and 12) and irradiation time was investigated and the complete degradation mechanism was revealed. Related photodegradation products were detected by high-performance liquid chromatography equipped with mass spectrometer (HPLC/MS-MS). BFO nanoparticles exhibited higher photocatalytic activity in the basic medium than in neutral and acidic medium. HPLC/MS-MS analysis of the solutions at pH = 1 and pH = 6.7 showed only decolorization process, with no detectable degradation products, while at pH = 12 three different degradation products were observed, and their concentration slightly decreased with time. Reusability test showed that BFO nanoparticles can be used in four successive photodegradation cycles, with no significant activity losses.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Journal of Environmental Chemical Engineering",
title = "Visible-light photocatalytic degradation of Mordant Blue 9 by single-phase BiFeO3 nanoparticles",
number = "1",
volume = "9",
doi = "10.1016/j.jece.2020.104587"
}

Ćirković, J., Radojković, A., Luković Golić, D., Tasić, N., Cizmic, M., Branković, G.,& Branković, Z.. (2021). Visible-light photocatalytic degradation of Mordant Blue 9 by single-phase BiFeO3 nanoparticles. in Journal of Environmental Chemical Engineering
Elsevier Sci Ltd, Oxford., 9(1).
https://doi.org/10.1016/j.jece.2020.104587

Ćirković J, Radojković A, Luković Golić D, Tasić N, Cizmic M, Branković G, Branković Z. Visible-light photocatalytic degradation of Mordant Blue 9 by single-phase BiFeO3 nanoparticles. in Journal of Environmental Chemical Engineering. 2021;9(1).
doi:10.1016/j.jece.2020.104587 .

Ćirković, Jovana, Radojković, Aleksandar, Luković Golić, Danijela, Tasić, Nikola, Cizmic, Mirta, Branković, Goran, Branković, Zorica, "Visible-light photocatalytic degradation of Mordant Blue 9 by single-phase BiFeO3 nanoparticles" in Journal of Environmental Chemical Engineering, 9, no. 1 (2021),
https://doi.org/10.1016/j.jece.2020.104587 . .

TY  - JOUR
AU  - Jovanović, Jelena
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Mutavdžić, Dragosav
AU  - Tanasijević, Gordana
AU  - Joksimović, Kristina
AU  - Bakic, Gordana
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1422
AB  - This investigation was aimed to develop films and coatings based on natural biopolymers and active components, with physicochemical and functional properties for application in antimicrobial packaging. Biopolymer films were obtained from emulsions and dispersions by casting method. Coatings were formed by the application of emulsions on existing packaging. Synthesis of emulsions and dispersions were performed by combining biopolymers (chitosan-gelatin, pectin-gelatin) with lemongrass essential oil (LEO), Zn(CH3COO)2.2H2O, or ZnO, as active components. Fourier transform infrared (FTIR) spectra of the films showed that the addition of glycerol contributed to the forming of strong hydrogen bonds between glycerol and chitosan-gelatin or pectin-gelatin composites, facilitating the process of polymer branching, which is substantial for encapsulation. Thermal analyses revealed two characteristic processes occurring at 110 degrees C (water evaporation) and within 215-235 degrees C (degradation of polysaccharide and glycerol). Major weight losses were observed at 290 degrees C (chitosan-gelatin films) and 215 degrees C (pectin-gelatin films). The chitosan-gelatin films exhibited a lower degree of solubility (31-21%), and better mechanical properties comparing with the pectin-gelatin films. The chitosan-gelatin emulsions and dispersions exhibited a higher antibacterial effect in vitro against E. coli, B. subtilis, and S. aureus. In the case of the pectin-gelatin emulsions, the impact of LEO on the antibacterial activity was evident. The effects of biopolymer coatings on the development of microorganisms on fresh raspberries (Rubus idaeus L.) were performed in vivo during eight days of raspberry storage at refrigerator temperature. The tested coatings extended the shelf life of stored raspberries from four to eight days. The synergistic effect between LEO and ZnO or Zn-Ac was observed both in vivo and in vitro.
PB  - Elsevier Science Sa, Lausanne
T2  - Progress in Organic Coatings
T1  - Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging
VL  - 158
DO  - 10.1016/j.porgcoat.2021.106349
ER  - 

@article{
author = "Jovanović, Jelena and Ćirković, Jovana and Radojković, Aleksandar and Mutavdžić, Dragosav and Tanasijević, Gordana and Joksimović, Kristina and Bakic, Gordana and Branković, Goran and Branković, Zorica",
year = "2021",
abstract = "This investigation was aimed to develop films and coatings based on natural biopolymers and active components, with physicochemical and functional properties for application in antimicrobial packaging. Biopolymer films were obtained from emulsions and dispersions by casting method. Coatings were formed by the application of emulsions on existing packaging. Synthesis of emulsions and dispersions were performed by combining biopolymers (chitosan-gelatin, pectin-gelatin) with lemongrass essential oil (LEO), Zn(CH3COO)2.2H2O, or ZnO, as active components. Fourier transform infrared (FTIR) spectra of the films showed that the addition of glycerol contributed to the forming of strong hydrogen bonds between glycerol and chitosan-gelatin or pectin-gelatin composites, facilitating the process of polymer branching, which is substantial for encapsulation. Thermal analyses revealed two characteristic processes occurring at 110 degrees C (water evaporation) and within 215-235 degrees C (degradation of polysaccharide and glycerol). Major weight losses were observed at 290 degrees C (chitosan-gelatin films) and 215 degrees C (pectin-gelatin films). The chitosan-gelatin films exhibited a lower degree of solubility (31-21%), and better mechanical properties comparing with the pectin-gelatin films. The chitosan-gelatin emulsions and dispersions exhibited a higher antibacterial effect in vitro against E. coli, B. subtilis, and S. aureus. In the case of the pectin-gelatin emulsions, the impact of LEO on the antibacterial activity was evident. The effects of biopolymer coatings on the development of microorganisms on fresh raspberries (Rubus idaeus L.) were performed in vivo during eight days of raspberry storage at refrigerator temperature. The tested coatings extended the shelf life of stored raspberries from four to eight days. The synergistic effect between LEO and ZnO or Zn-Ac was observed both in vivo and in vitro.",
publisher = "Elsevier Science Sa, Lausanne",
journal = "Progress in Organic Coatings",
title = "Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging",
volume = "158",
doi = "10.1016/j.porgcoat.2021.106349"
}

Jovanović, J., Ćirković, J., Radojković, A., Mutavdžić, D., Tanasijević, G., Joksimović, K., Bakic, G., Branković, G.,& Branković, Z.. (2021). Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging. in Progress in Organic Coatings
Elsevier Science Sa, Lausanne., 158.
https://doi.org/10.1016/j.porgcoat.2021.106349

Jovanović J, Ćirković J, Radojković A, Mutavdžić D, Tanasijević G, Joksimović K, Bakic G, Branković G, Branković Z. Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging. in Progress in Organic Coatings. 2021;158.
doi:10.1016/j.porgcoat.2021.106349 .

Jovanović, Jelena, Ćirković, Jovana, Radojković, Aleksandar, Mutavdžić, Dragosav, Tanasijević, Gordana, Joksimović, Kristina, Bakic, Gordana, Branković, Goran, Branković, Zorica, "Chitosan and pectin-based films and coatings with active components for application in antimicrobial food packaging" in Progress in Organic Coatings, 158 (2021),
https://doi.org/10.1016/j.porgcoat.2021.106349 . .

TY  - CONF
AU  - Vujancevic, Jelena
AU  - Ćirković, Jovana
AU  - Horvath, Endre
AU  - Laszlo, Forro
AU  - Pavlović, Vladimir
AU  - Janackovic, Djordje
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2874
AB  - TiO2 under UV light generates charge carriers (electrons and holes) that take part in the process of decomposition of pollutants, which is a well-known fact for the past few decades. For this reason, TiO2 is used for photocatalytic purification water and air. Photoactivity of TiO2 depends on the amount of generated charge carriers, and one part of those carriers are lost through the process of recombination. In order to improve photoactivity, it is necessary to speed up transport of electrons and holes. For better and faster charge carrier transport a unidirectional path is desired, which can be obtained by synthesizing 1D morphology. Anodization of titanium foil is a good way to obtain perpendicular nanotubular morphology onto a substrate. Nanotubular morphology can be optimized via operative conditions of anodization: applied voltage, anodization time and type of electrolyte. In this work, TiO2 nanotube arrays were synthesized by anodization of titanium foil at different voltages: 10 V, 15 V, 20 V and 25 V. Based on FESEM (Field Emission Scanning Electron Microscopy) micrographs, the microstructure of nanotubes was analysed and data concerning wall thickness, outer diameter of nanotubes and active surface were considered. Also, the influence of nanotube morphology on optical properties was determined. Results of our research show that the increasement in anodization voltage influenced on the appearance of redshift in the absorption spectrum. The sample synthesized at 20 V showed the highest photocatalytic activity due to the optimal nanotube length and nanotube diameter.
PB  - Belgrade : Innovation Center of Faculty of Mechanical Engineering
C3  - Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021
T1  - Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes
SP  - 23
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2874
ER  - 

@conference{
author = "Vujancevic, Jelena and Ćirković, Jovana and Horvath, Endre and Laszlo, Forro and Pavlović, Vladimir and Janackovic, Djordje",
year = "2021",
abstract = "TiO2 under UV light generates charge carriers (electrons and holes) that take part in the process of decomposition of pollutants, which is a well-known fact for the past few decades. For this reason, TiO2 is used for photocatalytic purification water and air. Photoactivity of TiO2 depends on the amount of generated charge carriers, and one part of those carriers are lost through the process of recombination. In order to improve photoactivity, it is necessary to speed up transport of electrons and holes. For better and faster charge carrier transport a unidirectional path is desired, which can be obtained by synthesizing 1D morphology. Anodization of titanium foil is a good way to obtain perpendicular nanotubular morphology onto a substrate. Nanotubular morphology can be optimized via operative conditions of anodization: applied voltage, anodization time and type of electrolyte. In this work, TiO2 nanotube arrays were synthesized by anodization of titanium foil at different voltages: 10 V, 15 V, 20 V and 25 V. Based on FESEM (Field Emission Scanning Electron Microscopy) micrographs, the microstructure of nanotubes was analysed and data concerning wall thickness, outer diameter of nanotubes and active surface were considered. Also, the influence of nanotube morphology on optical properties was determined. Results of our research show that the increasement in anodization voltage influenced on the appearance of redshift in the absorption spectrum. The sample synthesized at 20 V showed the highest photocatalytic activity due to the optimal nanotube length and nanotube diameter.",
publisher = "Belgrade : Innovation Center of Faculty of Mechanical Engineering",
journal = "Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021",
title = "Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes",
pages = "23",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2874"
}

Vujancevic, J., Ćirković, J., Horvath, E., Laszlo, F., Pavlović, V.,& Janackovic, D.. (2021). Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021
Belgrade : Innovation Center of Faculty of Mechanical Engineering., 23.
https://hdl.handle.net/21.15107/rcub_rimsi_2874

Vujancevic J, Ćirković J, Horvath E, Laszlo F, Pavlović V, Janackovic D. Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes. in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021. 2021;:23.
https://hdl.handle.net/21.15107/rcub_rimsi_2874 .

Vujancevic, Jelena, Ćirković, Jovana, Horvath, Endre, Laszlo, Forro, Pavlović, Vladimir, Janackovic, Djordje, "Influence of anodization voltage on photocatalztic activity of TiO2 nanotubes" in Programme and The Book of Abstracts / International Conference of Experimental and Numerical Investigations and New Technologies - CNN TECH 2021 (2021):23,
https://hdl.handle.net/21.15107/rcub_rimsi_2874 .

TY  - JOUR
AU  - Ristic, Predrag
AU  - Filipović, Nenad
AU  - Blagojević, Vladimir
AU  - Ćirković, Jovana
AU  - Hollo, Berta Barta
AU  - Dokic, Veljko R.
AU  - Donnard, Morgan
AU  - Gulea, Mihaela
AU  - Marjanović, Ivana
AU  - Klisuric, Olivera R.
AU  - Todorović, Tamara R.
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1461
AB  - Four silver-based coordination polymers, {[Ag(L1)(2)]NO3}(infinity) (1), {[Ag(L1)(2)]ClO4}(infinity) (2), {[Ag(L2)(2)]NO3 center dot H2O}(infinity) (3) and {[Ag(L2)(2)]ClO4}(infinity) (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(i) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min(-1). The best result was obtained for compound 4, which can be correlated to its largest lattice volume.
PB  - Royal Soc Chemistry, Cambridge
T2  - Crystengcomm
T1  - 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior
EP  - 4815
IS  - 27
SP  - 4799
VL  - 23
DO  - 10.1039/d1ce00394a
ER  - 

@article{
author = "Ristic, Predrag and Filipović, Nenad and Blagojević, Vladimir and Ćirković, Jovana and Hollo, Berta Barta and Dokic, Veljko R. and Donnard, Morgan and Gulea, Mihaela and Marjanović, Ivana and Klisuric, Olivera R. and Todorović, Tamara R.",
year = "2021",
abstract = "Four silver-based coordination polymers, {[Ag(L1)(2)]NO3}(infinity) (1), {[Ag(L1)(2)]ClO4}(infinity) (2), {[Ag(L2)(2)]NO3 center dot H2O}(infinity) (3) and {[Ag(L2)(2)]ClO4}(infinity) (4), were synthesized using the thiomorpholine-4-carbonitrile (L1) and piperazine-1,4-dicarbonitrile (L2) ligands. Compounds 1 and 2 are two-dimensional, while 3 and 4 are three-dimensional. L1 and L2 are 1,4-bis-monodentate ligands in all compounds, while Ag(i) ions are four-coordinated in a slightly distorted tetrahedral geometry. Topological analysis in standard representations suggests that underlying nets in 1 and 2 have an sql topology, while 3 and 4 exhibit a dia topology. Thermal analysis shows that 3 loses crystalline water at room temperature, while other compounds show good thermal stability. All compounds show good photocatalytic activity for photocatalytic degradation of the mordant blue 9 dye, with reaction rates in the range 0.029 to 0.061 min(-1). The best result was obtained for compound 4, which can be correlated to its largest lattice volume.",
publisher = "Royal Soc Chemistry, Cambridge",
journal = "Crystengcomm",
title = "2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior",
pages = "4815-4799",
number = "27",
volume = "23",
doi = "10.1039/d1ce00394a"
}

Ristic, P., Filipović, N., Blagojević, V., Ćirković, J., Hollo, B. B., Dokic, V. R., Donnard, M., Gulea, M., Marjanović, I., Klisuric, O. R.,& Todorović, T. R.. (2021). 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. in Crystengcomm
Royal Soc Chemistry, Cambridge., 23(27), 4799-4815.
https://doi.org/10.1039/d1ce00394a

Ristic P, Filipović N, Blagojević V, Ćirković J, Hollo BB, Dokic VR, Donnard M, Gulea M, Marjanović I, Klisuric OR, Todorović TR. 2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior. in Crystengcomm. 2021;23(27):4799-4815.
doi:10.1039/d1ce00394a .

Ristic, Predrag, Filipović, Nenad, Blagojević, Vladimir, Ćirković, Jovana, Hollo, Berta Barta, Dokic, Veljko R., Donnard, Morgan, Gulea, Mihaela, Marjanović, Ivana, Klisuric, Olivera R., Todorović, Tamara R., "2D and 3D silver-based coordination polymers with thiomorpholine-4-carbonitrile and piperazine-1,4-dicarbonitrile: structure, intermolecular interactions, photocatalysis, and thermal behavior" in Crystengcomm, 23, no. 27 (2021):4799-4815,
https://doi.org/10.1039/d1ce00394a . .

TY  - JOUR
AU  - Mitric, J.
AU  - Paunović, Novica
AU  - Mitric, M.
AU  - Ćirković, Jovana
AU  - Gilic, M.
AU  - Romčević, Maja
AU  - Romčević, Nebojša
PY  - 2021
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1467
AB  - In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top - down approach) and Solution Combustion Synthesis (bottom - up approach). For starting structural characterization, X - Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV-Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far - Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi - phonon processes which alter the reflection spectra of bulk YVO4 . The influence of Eu ions is reflected through multi - phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.
PB  - Elsevier, Amsterdam
T2  - Physica E-Low-Dimensional Systems & Nanostructures
T1  - Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders
VL  - 134
DO  - 10.1016/j.physe.2021.114923
ER  - 

@article{
author = "Mitric, J. and Paunović, Novica and Mitric, M. and Ćirković, Jovana and Gilic, M. and Romčević, Maja and Romčević, Nebojša",
year = "2021",
abstract = "In this paper two methods of preparation of yttrium orthovanadate nanopowders were presented: Solid State Reaction (top - down approach) and Solution Combustion Synthesis (bottom - up approach). For starting structural characterization, X - Ray Powder Diffraction (XPRD) and Field Emission Scanning Electron Microscopy (FESEM) were used. We report the change in reflection spectra in europium doped YVO4 nanopowders with comparison to its bulk analog. In UV-Vis reflection spectra we consider the change in values of band gap in these structures, after resizing it from bulk to nanomaterial. In Far - Infrared (FIR) reflection spectra, we registered the existence of Surface Optical Phonon (SOP) and different multi - phonon processes which alter the reflection spectra of bulk YVO4 . The influence of Eu ions is reflected through multi - phonon processes that occur and are connected with energy transfer from YVO4 lattice to Eu ions. All IR spectra were modeled using classical oscillator model with Drude part added which takes into account the free carrier contribution. Since our samples are distinctively inhomogeneous materials, we use Effective Medium theory in Maxwell Garnett approximation to model its effective dieletric function.",
publisher = "Elsevier, Amsterdam",
journal = "Physica E-Low-Dimensional Systems & Nanostructures",
title = "Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders",
volume = "134",
doi = "10.1016/j.physe.2021.114923"
}

Mitric, J., Paunović, N., Mitric, M., Ćirković, J., Gilic, M., Romčević, M.,& Romčević, N.. (2021). Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders. in Physica E-Low-Dimensional Systems & Nanostructures
Elsevier, Amsterdam., 134.
https://doi.org/10.1016/j.physe.2021.114923

Mitric J, Paunović N, Mitric M, Ćirković J, Gilic M, Romčević M, Romčević N. Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders. in Physica E-Low-Dimensional Systems & Nanostructures. 2021;134.
doi:10.1016/j.physe.2021.114923 .

Mitric, J., Paunović, Novica, Mitric, M., Ćirković, Jovana, Gilic, M., Romčević, Maja, Romčević, Nebojša, "Surface optical phonon and multi - phonon transitions in YVO4: Eu3+ nanopowders" in Physica E-Low-Dimensional Systems & Nanostructures, 134 (2021),
https://doi.org/10.1016/j.physe.2021.114923 . .

TY  - PAT
AU  - Branković, Zorica
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Branković, Goran
AU  - Jovanović, Jelena
AU  - Krnjajić, Slobodan
AU  - Veljović-Jovanović, Sonja
PY  - 2020
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2720
AB  - The present invention is in the field of aqueous emulsions that dry into water-insoluble or water-resistant structures that
are useful for active packaging, manufactured devices and components, and other applications. The aqueous emulsions of the present invention comprise biopolymers, metal in the form of a salt, nanoparticles or metal oxide nanoparticles, essential oil, and additives such as surfactants and plasticizers. When the components of the emulsion are mixed following the distinctive method of preparation, a water-soluble fluid is obtained, which, upon drying, becomes a water-insoluble or water-resistant solid exhibiting antimicrobial, antioxidative, and other useful properties including tensile strength, elasticity, transparency. The obtained fluid may be applied by spraying, pouring, injecting, 3-D printing, or otherwise formed into a solid product of any geometrical shape including film, foil, or other 3-D shape.
PB  - The World Intellectual Property Organization (WIPO)
T2  - International Patent Application No. PCT/RS2018/000013, International Filling Date: September 14, 2018., Applicants: University of Belgrade, Publication Number: WO 2020/055277 A1, Publication Date: March192020.
T1  - BIOPOLYMER EMULSION FOR ACTIVE PACKAGING, USES AND METHOD OF MANUFACTURING
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2720
ER  - 

@misc{
author = "Branković, Zorica and Ćirković, Jovana and Radojković, Aleksandar and Branković, Goran and Jovanović, Jelena and Krnjajić, Slobodan and Veljović-Jovanović, Sonja",
year = "2020",
abstract = "The present invention is in the field of aqueous emulsions that dry into water-insoluble or water-resistant structures that
are useful for active packaging, manufactured devices and components, and other applications. The aqueous emulsions of the present invention comprise biopolymers, metal in the form of a salt, nanoparticles or metal oxide nanoparticles, essential oil, and additives such as surfactants and plasticizers. When the components of the emulsion are mixed following the distinctive method of preparation, a water-soluble fluid is obtained, which, upon drying, becomes a water-insoluble or water-resistant solid exhibiting antimicrobial, antioxidative, and other useful properties including tensile strength, elasticity, transparency. The obtained fluid may be applied by spraying, pouring, injecting, 3-D printing, or otherwise formed into a solid product of any geometrical shape including film, foil, or other 3-D shape.",
publisher = "The World Intellectual Property Organization (WIPO)",
journal = "International Patent Application No. PCT/RS2018/000013, International Filling Date: September 14, 2018., Applicants: University of Belgrade, Publication Number: WO 2020/055277 A1, Publication Date: March192020.",
title = "BIOPOLYMER EMULSION FOR ACTIVE PACKAGING, USES AND METHOD OF MANUFACTURING",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2720"
}

Branković, Z., Ćirković, J., Radojković, A., Branković, G., Jovanović, J., Krnjajić, S.,& Veljović-Jovanović, S.. (2020). BIOPOLYMER EMULSION FOR ACTIVE PACKAGING, USES AND METHOD OF MANUFACTURING. in International Patent Application No. PCT/RS2018/000013, International Filling Date: September 14, 2018., Applicants: University of Belgrade, Publication Number: WO 2020/055277 A1, Publication Date: March192020.
The World Intellectual Property Organization (WIPO)..
https://hdl.handle.net/21.15107/rcub_rimsi_2720

Branković Z, Ćirković J, Radojković A, Branković G, Jovanović J, Krnjajić S, Veljović-Jovanović S. BIOPOLYMER EMULSION FOR ACTIVE PACKAGING, USES AND METHOD OF MANUFACTURING. in International Patent Application No. PCT/RS2018/000013, International Filling Date: September 14, 2018., Applicants: University of Belgrade, Publication Number: WO 2020/055277 A1, Publication Date: March192020.. 2020;.
https://hdl.handle.net/21.15107/rcub_rimsi_2720 .

Branković, Zorica, Ćirković, Jovana, Radojković, Aleksandar, Branković, Goran, Jovanović, Jelena, Krnjajić, Slobodan, Veljović-Jovanović, Sonja, "BIOPOLYMER EMULSION FOR ACTIVE PACKAGING, USES AND METHOD OF MANUFACTURING" in International Patent Application No. PCT/RS2018/000013, International Filling Date: September 14, 2018., Applicants: University of Belgrade, Publication Number: WO 2020/055277 A1, Publication Date: March192020. (2020),
https://hdl.handle.net/21.15107/rcub_rimsi_2720 .

TY  - JOUR
AU  - Jovanović, Jelena
AU  - Krnjajić, Slobodan
AU  - Ćirković, Jovana
AU  - Radojković, Aleksandar
AU  - Popović, Tatjana
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2020
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1353
AB  - The study reported the development of biodegradable, environment- and eco-friendly material based on natural polymers and lemongrass (Cymbopogon citratus L.) essential oil (LEO) for application as a green pesticide. The insecticidal effect of an emulsion composed of encapsulated LEO into a biopolymer matrix against the potato tuber moth (Phthorimaea operculella, Lepidoptera: Gelechiidae) (PTM) was examined and its prolonged effect compared with pure LEO. The lethal effect of the encapsulated LEO against the PTM was prolonged for up to seven days as compared to 48 h for the pure LEO. The slow release rate of the active compound (citral) from the encapsulated and the pure LEO was determined by UV-Vis spectrophotometry. After seven days the citral concentration in the encapsulated LEO was higher (60%) than in the pure LEO after 48 h (52.7%). The results of the slow release of the active compound correlated well with the insecticidal effect of the encapsulated and the pure LEO against the PTM.
PB  - Elsevier Sci Ltd, Oxford
T2  - Crop Protection
T1  - Effect of encapsulated lemongrass (Cymbopogon citratus L.) essential oil against potato tuber moth Phthorimaea operculella
VL  - 132
DO  - 10.1016/j.cropro.2020.105109
ER  - 

@article{
author = "Jovanović, Jelena and Krnjajić, Slobodan and Ćirković, Jovana and Radojković, Aleksandar and Popović, Tatjana and Branković, Goran and Branković, Zorica",
year = "2020",
abstract = "The study reported the development of biodegradable, environment- and eco-friendly material based on natural polymers and lemongrass (Cymbopogon citratus L.) essential oil (LEO) for application as a green pesticide. The insecticidal effect of an emulsion composed of encapsulated LEO into a biopolymer matrix against the potato tuber moth (Phthorimaea operculella, Lepidoptera: Gelechiidae) (PTM) was examined and its prolonged effect compared with pure LEO. The lethal effect of the encapsulated LEO against the PTM was prolonged for up to seven days as compared to 48 h for the pure LEO. The slow release rate of the active compound (citral) from the encapsulated and the pure LEO was determined by UV-Vis spectrophotometry. After seven days the citral concentration in the encapsulated LEO was higher (60%) than in the pure LEO after 48 h (52.7%). The results of the slow release of the active compound correlated well with the insecticidal effect of the encapsulated and the pure LEO against the PTM.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Crop Protection",
title = "Effect of encapsulated lemongrass (Cymbopogon citratus L.) essential oil against potato tuber moth Phthorimaea operculella",
volume = "132",
doi = "10.1016/j.cropro.2020.105109"
}

Jovanović, J., Krnjajić, S., Ćirković, J., Radojković, A., Popović, T., Branković, G.,& Branković, Z.. (2020). Effect of encapsulated lemongrass (Cymbopogon citratus L.) essential oil against potato tuber moth Phthorimaea operculella. in Crop Protection
Elsevier Sci Ltd, Oxford., 132.
https://doi.org/10.1016/j.cropro.2020.105109

Jovanović J, Krnjajić S, Ćirković J, Radojković A, Popović T, Branković G, Branković Z. Effect of encapsulated lemongrass (Cymbopogon citratus L.) essential oil against potato tuber moth Phthorimaea operculella. in Crop Protection. 2020;132.
doi:10.1016/j.cropro.2020.105109 .

Jovanović, Jelena, Krnjajić, Slobodan, Ćirković, Jovana, Radojković, Aleksandar, Popović, Tatjana, Branković, Goran, Branković, Zorica, "Effect of encapsulated lemongrass (Cymbopogon citratus L.) essential oil against potato tuber moth Phthorimaea operculella" in Crop Protection, 132 (2020),
https://doi.org/10.1016/j.cropro.2020.105109 . .

TY  - CONF
AU  - Tasić, Nikola
AU  - Ćirković, Jovana
AU  - Žunić, Milan
AU  - Ribić, Vesna
AU  - Dapčević, Aleksandra
AU  - Curkovic, Lidija
AU  - Branković, Zorica
AU  - Branković, Goran
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2947
PB  - University of Belgrade, Institute for Multidisciplinary Research
C3  - The book of Abstract / 5th Conference of the Serbian Society for Ceramic Materials, 5CSCS-2019,June 11-13, 2019, Belgrade, Serbia, 2019
T1  - Ag/TiO2 nanocomposite materials for application in visiblelight - photocatalysis
SP  - 123
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2947
ER  - 

@conference{
author = "Tasić, Nikola and Ćirković, Jovana and Žunić, Milan and Ribić, Vesna and Dapčević, Aleksandra and Curkovic, Lidija and Branković, Zorica and Branković, Goran",
year = "2019",
publisher = "University of Belgrade, Institute for Multidisciplinary Research",
journal = "The book of Abstract / 5th Conference of the Serbian Society for Ceramic Materials, 5CSCS-2019,June 11-13, 2019, Belgrade, Serbia, 2019",
title = "Ag/TiO2 nanocomposite materials for application in visiblelight - photocatalysis",
pages = "123",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2947"
}

Tasić, N., Ćirković, J., Žunić, M., Ribić, V., Dapčević, A., Curkovic, L., Branković, Z.,& Branković, G.. (2019). Ag/TiO2 nanocomposite materials for application in visiblelight - photocatalysis. in The book of Abstract / 5th Conference of the Serbian Society for Ceramic Materials, 5CSCS-2019,June 11-13, 2019, Belgrade, Serbia, 2019
University of Belgrade, Institute for Multidisciplinary Research., 123.
https://hdl.handle.net/21.15107/rcub_rimsi_2947

Tasić N, Ćirković J, Žunić M, Ribić V, Dapčević A, Curkovic L, Branković Z, Branković G. Ag/TiO2 nanocomposite materials for application in visiblelight - photocatalysis. in The book of Abstract / 5th Conference of the Serbian Society for Ceramic Materials, 5CSCS-2019,June 11-13, 2019, Belgrade, Serbia, 2019. 2019;:123.
https://hdl.handle.net/21.15107/rcub_rimsi_2947 .

Tasić, Nikola, Ćirković, Jovana, Žunić, Milan, Ribić, Vesna, Dapčević, Aleksandra, Curkovic, Lidija, Branković, Zorica, Branković, Goran, "Ag/TiO2 nanocomposite materials for application in visiblelight - photocatalysis" in The book of Abstract / 5th Conference of the Serbian Society for Ceramic Materials, 5CSCS-2019,June 11-13, 2019, Belgrade, Serbia, 2019 (2019):123,
https://hdl.handle.net/21.15107/rcub_rimsi_2947 .

TY  - CONF
AU  - Ćirković, Jovana
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Dapčević, Aleksandra
AU  - Tasic, Nikola
AU  - Jovanović, Jelena
AU  - Čizmić, Mirta
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1775
AB  - BiFeO3 (BFO) precursor powder was synthesized by ultrasound asissted sol–gel route at relatively low temperature, starting from Bi-nitrate, Fe-nitrate, and ethylene glycol. Structural, optical, and photocatalytic properties of the obtained powder were investigated. X-ray diffraction analysis confirmed that thermal treatment of precursor powder at 500 °C led to formation of pure phase BiFeO3. BFO is p-type semiconductor where determined band gap was 2.20 eV, indicating its potential application as visible-light-response photocatalyst. Mott-Schottky measurements were performed to determine flat band potential and position of valence and conduction bands. Obtained BFO powder is used for photocatalytic degradation of typical organic azo dye Mordant Blue 9 in concentration of 50 mg/l. Measurements were performed for different times of irradiation and pH of the dye solution. Photodegradation products were analyzied by HPLC technique, and mechanism of photocatalytic degradation of organic dye was proposed.
PB  - Institute for Multidisciplinary Research, University of Belgrade  Kneza Višeslava 1, 11000 Belgrade, Serbia
C3  - The 5th International Conference of the Serbian Society for Ceramic Materials: 5CSCS-2019, Belgrade, Serbia
T1  - Structural, optical and photocatalytic properties of BiFeO3 nanoparticles
SP  - 95
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1775
ER  - 

@conference{
author = "Ćirković, Jovana and Luković Golić, Danijela and Radojković, Aleksandar and Dapčević, Aleksandra and Tasic, Nikola and Jovanović, Jelena and Čizmić, Mirta and Branković, Goran and Branković, Zorica",
year = "2019",
abstract = "BiFeO3 (BFO) precursor powder was synthesized by ultrasound asissted sol–gel route at relatively low temperature, starting from Bi-nitrate, Fe-nitrate, and ethylene glycol. Structural, optical, and photocatalytic properties of the obtained powder were investigated. X-ray diffraction analysis confirmed that thermal treatment of precursor powder at 500 °C led to formation of pure phase BiFeO3. BFO is p-type semiconductor where determined band gap was 2.20 eV, indicating its potential application as visible-light-response photocatalyst. Mott-Schottky measurements were performed to determine flat band potential and position of valence and conduction bands. Obtained BFO powder is used for photocatalytic degradation of typical organic azo dye Mordant Blue 9 in concentration of 50 mg/l. Measurements were performed for different times of irradiation and pH of the dye solution. Photodegradation products were analyzied by HPLC technique, and mechanism of photocatalytic degradation of organic dye was proposed.",
publisher = "Institute for Multidisciplinary Research, University of Belgrade  Kneza Višeslava 1, 11000 Belgrade, Serbia",
journal = "The 5th International Conference of the Serbian Society for Ceramic Materials: 5CSCS-2019, Belgrade, Serbia",
title = "Structural, optical and photocatalytic properties of BiFeO3 nanoparticles",
pages = "95",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1775"
}

Ćirković, J., Luković Golić, D., Radojković, A., Dapčević, A., Tasic, N., Jovanović, J., Čizmić, M., Branković, G.,& Branković, Z.. (2019). Structural, optical and photocatalytic properties of BiFeO3 nanoparticles. in The 5th International Conference of the Serbian Society for Ceramic Materials: 5CSCS-2019, Belgrade, Serbia
Institute for Multidisciplinary Research, University of Belgrade  Kneza Višeslava 1, 11000 Belgrade, Serbia., 95.
https://hdl.handle.net/21.15107/rcub_rimsi_1775

Ćirković J, Luković Golić D, Radojković A, Dapčević A, Tasic N, Jovanović J, Čizmić M, Branković G, Branković Z. Structural, optical and photocatalytic properties of BiFeO3 nanoparticles. in The 5th International Conference of the Serbian Society for Ceramic Materials: 5CSCS-2019, Belgrade, Serbia. 2019;:95.
https://hdl.handle.net/21.15107/rcub_rimsi_1775 .

Ćirković, Jovana, Luković Golić, Danijela, Radojković, Aleksandar, Dapčević, Aleksandra, Tasic, Nikola, Jovanović, Jelena, Čizmić, Mirta, Branković, Goran, Branković, Zorica, "Structural, optical and photocatalytic properties of BiFeO3 nanoparticles" in The 5th International Conference of the Serbian Society for Ceramic Materials: 5CSCS-2019, Belgrade, Serbia (2019):95,
https://hdl.handle.net/21.15107/rcub_rimsi_1775 .

TY  - CONF
AU  - Radojković, Aleksandar
AU  - Luković Golić, Danijela
AU  - Ćirković, Jovana
AU  - Pajić, Damir
AU  - Torić, Filip
AU  - Dapčević, Aleksandra
AU  - Branković, Zorica
AU  - Branković, Goran
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1754
AB  - BiFeO3, as one of few multiferroic perovskites, is distinguished by some drawbacks such as high leakage current,
low remnant magnetic polarization, high electric coercive field, and difficulties of pure phase synthesis that still
keep it away from any practical use in electronics. There have been many attempts to improve the overall properties
of BiFeO3 by A- or B-site doping or by both. It was found that B-site doping with Nb can potentially improve both
the ferroelectric and magnetic properties of BiFeO3. In this study, BiFe1–xNbxO3 (x=0.002; 0.005 and 0.01) bulk ceramics
were investigated in the quest for a more integral understanding of changes in multiferroic properties caused by
light Nb doping (≤ 1 mole%). BiFe1–xNbxO3 powders were synthesized by hydro evaporation method and only traces
of the secondary phases were observed. Multiferroic properties of bulk ceramics were investigated using X-ray
diffraction (XRD) analysis, scanning electron spectroscopy (SEM), polarization (PMTS), and magnetization (SQUID)
techniques. It was shown that even small percentages of Nb could notably change the electric and magnetic
behavior of BiFeO3. The electric conductivity differed by two orders of magnitude between samples doped with
0.2 and 1% Nb. The ferroelectric behavior strongly depended on the conduction mechanism, and the transition from
space-charge-limited current (SCLC) conduction to trap-filled Limited (TFL) conduction regime reflected on a
change in hysteresis patterns, particularly for the samples with 0.2 and 0.5% Nb. ZFC-FC magnetization curves were
separated for all Nb concentrations and the degree of separation increased with Nb doping. Weak ferromagnetic
behavior was observed from the hysteresis measurements and the increase of remnant magnetization with Nb
concentration. The coercive magnetic field changed drastically compared to the pure BiFeO3, namely, the sample with
1% Nb exhibited a very high coercive magnetic field of ~10 kOe.
PB  - Innovinc International
C3  - 3rd World Chemistry Conference and Exhibition
T1  - Tuning of BiFeO3  multiferroic properties by light doping with Nb
SP  - 26
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_1754
ER  - 

@conference{
author = "Radojković, Aleksandar and Luković Golić, Danijela and Ćirković, Jovana and Pajić, Damir and Torić, Filip and Dapčević, Aleksandra and Branković, Zorica and Branković, Goran",
year = "2019",
abstract = "BiFeO3, as one of few multiferroic perovskites, is distinguished by some drawbacks such as high leakage current,
low remnant magnetic polarization, high electric coercive field, and difficulties of pure phase synthesis that still
keep it away from any practical use in electronics. There have been many attempts to improve the overall properties
of BiFeO3 by A- or B-site doping or by both. It was found that B-site doping with Nb can potentially improve both
the ferroelectric and magnetic properties of BiFeO3. In this study, BiFe1–xNbxO3 (x=0.002; 0.005 and 0.01) bulk ceramics
were investigated in the quest for a more integral understanding of changes in multiferroic properties caused by
light Nb doping (≤ 1 mole%). BiFe1–xNbxO3 powders were synthesized by hydro evaporation method and only traces
of the secondary phases were observed. Multiferroic properties of bulk ceramics were investigated using X-ray
diffraction (XRD) analysis, scanning electron spectroscopy (SEM), polarization (PMTS), and magnetization (SQUID)
techniques. It was shown that even small percentages of Nb could notably change the electric and magnetic
behavior of BiFeO3. The electric conductivity differed by two orders of magnitude between samples doped with
0.2 and 1% Nb. The ferroelectric behavior strongly depended on the conduction mechanism, and the transition from
space-charge-limited current (SCLC) conduction to trap-filled Limited (TFL) conduction regime reflected on a
change in hysteresis patterns, particularly for the samples with 0.2 and 0.5% Nb. ZFC-FC magnetization curves were
separated for all Nb concentrations and the degree of separation increased with Nb doping. Weak ferromagnetic
behavior was observed from the hysteresis measurements and the increase of remnant magnetization with Nb
concentration. The coercive magnetic field changed drastically compared to the pure BiFeO3, namely, the sample with
1% Nb exhibited a very high coercive magnetic field of ~10 kOe.",
publisher = "Innovinc International",
journal = "3rd World Chemistry Conference and Exhibition",
title = "Tuning of BiFeO3  multiferroic properties by light doping with Nb",
pages = "26",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_1754"
}

Radojković, A., Luković Golić, D., Ćirković, J., Pajić, D., Torić, F., Dapčević, A., Branković, Z.,& Branković, G.. (2019). Tuning of BiFeO3  multiferroic properties by light doping with Nb. in 3rd World Chemistry Conference and Exhibition
Innovinc International., 26.
https://hdl.handle.net/21.15107/rcub_rimsi_1754

Radojković A, Luković Golić D, Ćirković J, Pajić D, Torić F, Dapčević A, Branković Z, Branković G. Tuning of BiFeO3  multiferroic properties by light doping with Nb. in 3rd World Chemistry Conference and Exhibition. 2019;:26.
https://hdl.handle.net/21.15107/rcub_rimsi_1754 .

Radojković, Aleksandar, Luković Golić, Danijela, Ćirković, Jovana, Pajić, Damir, Torić, Filip, Dapčević, Aleksandra, Branković, Zorica, Branković, Goran, "Tuning of BiFeO3  multiferroic properties by light doping with Nb" in 3rd World Chemistry Conference and Exhibition (2019):26,
https://hdl.handle.net/21.15107/rcub_rimsi_1754 .

TY  - JOUR
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Dapčević, Aleksandra
AU  - Pajić, Damir
AU  - Dragović, Jure
AU  - Toric, Filip
AU  - Ćirković, Jovana
AU  - Branković, Goran
AU  - Branković, Zorica
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1199
AB  - Bismuth ferrite, BiFeO3, was doped with a wide range of concentrations (0-30%) of Gd in order to investigate structural, ferroelectric, and magnetic properties and their correlation. Powder samples of Bi1-xGdxFeO3 (x = 0.00-0.30) were prepared using the hydro-evaporation synthesis method. Sintering process at 870 degrees C for 6 h of as-prepared, Gd doped BiFeO3 powders resulted in ceramic samples with relative densities in the range of (74-86) %. XRD analysis revealed that Bi1-xGdxFeO3 samples (x = 0.00-0.09) crystallized in rhombohedral phase; Bi1-xGdxFeO3 samples (x = 0.10-0.20) contained both rhombohedral and orthorhombic phases, while Bi1-xGdxFeO3 (x = 0.30) sample contained only the orthorhombic phase. The structural parameters obtained after Rietveld refinement for single-phase Bi1-xGdxFeO3 ceramic samples and microstructure image analysis were correlated with the results of ferroelectric and magnetic measurements. Bi1-xGdxFeO3 (x = 0.0625, 0.075, 0.09) samples showed improved ferroelectric properties and reduced leakage current density in comparison with undoped BiFeO3. Gradual increase in Gd content in BiFeO3 led to enhanced magnetic responses and weak ferromagnetic behavior.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Change in structural, ferroelectric, and magnetic properties of bismuth ferrite induced by doping with gadolinium
EP  - 19165
IS  - 15
SP  - 19158
VL  - 45
DO  - 10.1016/j.ceramint.2019.06.162
ER  - 

@article{
author = "Luković Golić, Danijela and Radojković, Aleksandar and Dapčević, Aleksandra and Pajić, Damir and Dragović, Jure and Toric, Filip and Ćirković, Jovana and Branković, Goran and Branković, Zorica",
year = "2019",
abstract = "Bismuth ferrite, BiFeO3, was doped with a wide range of concentrations (0-30%) of Gd in order to investigate structural, ferroelectric, and magnetic properties and their correlation. Powder samples of Bi1-xGdxFeO3 (x = 0.00-0.30) were prepared using the hydro-evaporation synthesis method. Sintering process at 870 degrees C for 6 h of as-prepared, Gd doped BiFeO3 powders resulted in ceramic samples with relative densities in the range of (74-86) %. XRD analysis revealed that Bi1-xGdxFeO3 samples (x = 0.00-0.09) crystallized in rhombohedral phase; Bi1-xGdxFeO3 samples (x = 0.10-0.20) contained both rhombohedral and orthorhombic phases, while Bi1-xGdxFeO3 (x = 0.30) sample contained only the orthorhombic phase. The structural parameters obtained after Rietveld refinement for single-phase Bi1-xGdxFeO3 ceramic samples and microstructure image analysis were correlated with the results of ferroelectric and magnetic measurements. Bi1-xGdxFeO3 (x = 0.0625, 0.075, 0.09) samples showed improved ferroelectric properties and reduced leakage current density in comparison with undoped BiFeO3. Gradual increase in Gd content in BiFeO3 led to enhanced magnetic responses and weak ferromagnetic behavior.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Change in structural, ferroelectric, and magnetic properties of bismuth ferrite induced by doping with gadolinium",
pages = "19165-19158",
number = "15",
volume = "45",
doi = "10.1016/j.ceramint.2019.06.162"
}

Luković Golić, D., Radojković, A., Dapčević, A., Pajić, D., Dragović, J., Toric, F., Ćirković, J., Branković, G.,& Branković, Z.. (2019). Change in structural, ferroelectric, and magnetic properties of bismuth ferrite induced by doping with gadolinium. in Ceramics International
Elsevier Sci Ltd, Oxford., 45(15), 19158-19165.
https://doi.org/10.1016/j.ceramint.2019.06.162

Luković Golić D, Radojković A, Dapčević A, Pajić D, Dragović J, Toric F, Ćirković J, Branković G, Branković Z. Change in structural, ferroelectric, and magnetic properties of bismuth ferrite induced by doping with gadolinium. in Ceramics International. 2019;45(15):19158-19165.
doi:10.1016/j.ceramint.2019.06.162 .

Luković Golić, Danijela, Radojković, Aleksandar, Dapčević, Aleksandra, Pajić, Damir, Dragović, Jure, Toric, Filip, Ćirković, Jovana, Branković, Goran, Branković, Zorica, "Change in structural, ferroelectric, and magnetic properties of bismuth ferrite induced by doping with gadolinium" in Ceramics International, 45, no. 15 (2019):19158-19165,
https://doi.org/10.1016/j.ceramint.2019.06.162 . .

TY  - CONF
AU  - Gilic, Martina
AU  - Ćirković, Jovana
AU  - Mitrić, Jelena
AU  - Petrovic, Suzana
AU  - Perusko, Davor
AU  - Reissig, Louisa
AU  - Romcevic, Nebojsa
PY  - 2019
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2971
PB  - University of Belgrade, Institute for Multidisciplinary Research
C3  - Programme and the book of abstracts, 5th Conference of the Serbian society for Ceramic Materials, June 11-13.2019. Belgrade, Serbia
T1  - OPTICAL AND STRUCTURAL INVESTIGATION OF Cr2O3 THIN FILMS: THE EFFECT OF THICKNESS FOR POSSIBLE APPLICATION FOR DIFFERENTIAL PHOTODETECTORS
SP  - 93
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2971
ER  - 

@conference{
author = "Gilic, Martina and Ćirković, Jovana and Mitrić, Jelena and Petrovic, Suzana and Perusko, Davor and Reissig, Louisa and Romcevic, Nebojsa",
year = "2019",
publisher = "University of Belgrade, Institute for Multidisciplinary Research",
journal = "Programme and the book of abstracts, 5th Conference of the Serbian society for Ceramic Materials, June 11-13.2019. Belgrade, Serbia",
title = "OPTICAL AND STRUCTURAL INVESTIGATION OF Cr2O3 THIN FILMS: THE EFFECT OF THICKNESS FOR POSSIBLE APPLICATION FOR DIFFERENTIAL PHOTODETECTORS",
pages = "93",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2971"
}

Gilic, M., Ćirković, J., Mitrić, J., Petrovic, S., Perusko, D., Reissig, L.,& Romcevic, N.. (2019). OPTICAL AND STRUCTURAL INVESTIGATION OF Cr2O3 THIN FILMS: THE EFFECT OF THICKNESS FOR POSSIBLE APPLICATION FOR DIFFERENTIAL PHOTODETECTORS. in Programme and the book of abstracts, 5th Conference of the Serbian society for Ceramic Materials, June 11-13.2019. Belgrade, Serbia
University of Belgrade, Institute for Multidisciplinary Research., 93.
https://hdl.handle.net/21.15107/rcub_rimsi_2971

Gilic M, Ćirković J, Mitrić J, Petrovic S, Perusko D, Reissig L, Romcevic N. OPTICAL AND STRUCTURAL INVESTIGATION OF Cr2O3 THIN FILMS: THE EFFECT OF THICKNESS FOR POSSIBLE APPLICATION FOR DIFFERENTIAL PHOTODETECTORS. in Programme and the book of abstracts, 5th Conference of the Serbian society for Ceramic Materials, June 11-13.2019. Belgrade, Serbia. 2019;:93.
https://hdl.handle.net/21.15107/rcub_rimsi_2971 .

Gilic, Martina, Ćirković, Jovana, Mitrić, Jelena, Petrovic, Suzana, Perusko, Davor, Reissig, Louisa, Romcevic, Nebojsa, "OPTICAL AND STRUCTURAL INVESTIGATION OF Cr2O3 THIN FILMS: THE EFFECT OF THICKNESS FOR POSSIBLE APPLICATION FOR DIFFERENTIAL PHOTODETECTORS" in Programme and the book of abstracts, 5th Conference of the Serbian society for Ceramic Materials, June 11-13.2019. Belgrade, Serbia (2019):93,
https://hdl.handle.net/21.15107/rcub_rimsi_2971 .