TY  - CONF
AU  - Damnjanovic, Mirjana
AU  - Zivanov, Ljiljana
AU  - Djuric, Snezana
AU  - Stojanovic, Goran
AU  - Menicanin, Aleksandar
PY  - 2011
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3176
AB  - The aim of this paper is to investigate the efficiency of simple structures of ferrite electromagnetic interference (EMI) suppressors in different ferrite materials. The EMI suppressors are fabricated using the ceramic co-processing technology. As a basic material is used Ni-Zn ferrite material. In the middle of a ferrite body, a Pt conductive layer is embedded, which provides a low DC resistance of component. Due to the presence of ferrite material, EMI suppressor behaves as low pass filter (i.e. as a frequency dependent resistor) and provides signal free from distortions.
PB  - 20th International Conference on Soft Magnetic Materials - SMM20
C3  - 20th International Conference on Soft Magnetic Materials - SMM20
T1  - Impedance modeling of simple structures of ferrite EMI suppressors in different ferrite materials
SP  - 141
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_3176
ER  - 

@conference{
author = "Damnjanovic, Mirjana and Zivanov, Ljiljana and Djuric, Snezana and Stojanovic, Goran and Menicanin, Aleksandar",
year = "2011",
abstract = "The aim of this paper is to investigate the efficiency of simple structures of ferrite electromagnetic interference (EMI) suppressors in different ferrite materials. The EMI suppressors are fabricated using the ceramic co-processing technology. As a basic material is used Ni-Zn ferrite material. In the middle of a ferrite body, a Pt conductive layer is embedded, which provides a low DC resistance of component. Due to the presence of ferrite material, EMI suppressor behaves as low pass filter (i.e. as a frequency dependent resistor) and provides signal free from distortions.",
publisher = "20th International Conference on Soft Magnetic Materials - SMM20",
journal = "20th International Conference on Soft Magnetic Materials - SMM20",
title = "Impedance modeling of simple structures of ferrite EMI suppressors in different ferrite materials",
pages = "141",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_3176"
}

Damnjanovic, M., Zivanov, L., Djuric, S., Stojanovic, G.,& Menicanin, A.. (2011). Impedance modeling of simple structures of ferrite EMI suppressors in different ferrite materials. in 20th International Conference on Soft Magnetic Materials - SMM20
20th International Conference on Soft Magnetic Materials - SMM20., 141.
https://hdl.handle.net/21.15107/rcub_rimsi_3176

Damnjanovic M, Zivanov L, Djuric S, Stojanovic G, Menicanin A. Impedance modeling of simple structures of ferrite EMI suppressors in different ferrite materials. in 20th International Conference on Soft Magnetic Materials - SMM20. 2011;:141.
https://hdl.handle.net/21.15107/rcub_rimsi_3176 .

Damnjanovic, Mirjana, Zivanov, Ljiljana, Djuric, Snezana, Stojanovic, Goran, Menicanin, Aleksandar, "Impedance modeling of simple structures of ferrite EMI suppressors in different ferrite materials" in 20th International Conference on Soft Magnetic Materials - SMM20 (2011):141,
https://hdl.handle.net/21.15107/rcub_rimsi_3176 .

TY  - CONF
AU  - Damnjanovic, Mirjana
AU  - Zivanov, Ljiljana
AU  - Djuric, Snezana
AU  - Stojanovic, Goran
AU  - Menicanin, Aleksandar
PY  - 2011
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3175
AB  - The properties of ferrite material as well as geometrical parameters determine the efficiency of ferrite component in electromagnetic interference (EMI) applications. Due to the presence of ferrite material, EMI suppressor behaves as low pass filter (i.e. as a frequency dependent resistor) and provides signal free from distortions. Near ferrimagnetic resonant frequency, component has maximal impedance and efficiently suppresses noise. Better suppression can be achieved by making the conductive layer longer. Three simple structures are analyzed: Line, Zig-zag and Double coil. Nevertheless, longer conductive lines introduce parasitic capacitance, which causes the maximal impedance frequency shift towards lower frequencies. The aim of this paper is to investigate the efficiency of simple structures of EMI suppressors in different ferrite materials. Two Ni-Zn materials are used for fabrication of EMI suppressors: low permeability F14 material (suitable for suppression above 200 MHz; initial permeability er= 220), and high permeability F19 material (which is used for suppression in the range from 20MHz to 200MHz; er=1000). Comparison of the same structure with identical geometrical parameters in F14 and F19 material in the frequency range 1MHz–3GHz shows that the device in low permeability F14 material achieves greater impedance and better suppression (up to 25%).
PB  - Nikola Tesla Society and Institute of Electrical Engineering „Nikola Tesla“, Belgrade
C3  - 7th International Symposium Nikola Tesla
T1  - Efficiency analysis of simple structures of ferrite EMI suppressors in different ferrite materials
EP  - 100
SP  - 93
VL  - 1
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_3175
ER  - 

@conference{
author = "Damnjanovic, Mirjana and Zivanov, Ljiljana and Djuric, Snezana and Stojanovic, Goran and Menicanin, Aleksandar",
year = "2011",
abstract = "The properties of ferrite material as well as geometrical parameters determine the efficiency of ferrite component in electromagnetic interference (EMI) applications. Due to the presence of ferrite material, EMI suppressor behaves as low pass filter (i.e. as a frequency dependent resistor) and provides signal free from distortions. Near ferrimagnetic resonant frequency, component has maximal impedance and efficiently suppresses noise. Better suppression can be achieved by making the conductive layer longer. Three simple structures are analyzed: Line, Zig-zag and Double coil. Nevertheless, longer conductive lines introduce parasitic capacitance, which causes the maximal impedance frequency shift towards lower frequencies. The aim of this paper is to investigate the efficiency of simple structures of EMI suppressors in different ferrite materials. Two Ni-Zn materials are used for fabrication of EMI suppressors: low permeability F14 material (suitable for suppression above 200 MHz; initial permeability er= 220), and high permeability F19 material (which is used for suppression in the range from 20MHz to 200MHz; er=1000). Comparison of the same structure with identical geometrical parameters in F14 and F19 material in the frequency range 1MHz–3GHz shows that the device in low permeability F14 material achieves greater impedance and better suppression (up to 25%).",
publisher = "Nikola Tesla Society and Institute of Electrical Engineering „Nikola Tesla“, Belgrade",
journal = "7th International Symposium Nikola Tesla",
title = "Efficiency analysis of simple structures of ferrite EMI suppressors in different ferrite materials",
pages = "100-93",
volume = "1",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_3175"
}

Damnjanovic, M., Zivanov, L., Djuric, S., Stojanovic, G.,& Menicanin, A.. (2011). Efficiency analysis of simple structures of ferrite EMI suppressors in different ferrite materials. in 7th International Symposium Nikola Tesla
Nikola Tesla Society and Institute of Electrical Engineering „Nikola Tesla“, Belgrade., 1, 93-100.
https://hdl.handle.net/21.15107/rcub_rimsi_3175

Damnjanovic M, Zivanov L, Djuric S, Stojanovic G, Menicanin A. Efficiency analysis of simple structures of ferrite EMI suppressors in different ferrite materials. in 7th International Symposium Nikola Tesla. 2011;1:93-100.
https://hdl.handle.net/21.15107/rcub_rimsi_3175 .

Damnjanovic, Mirjana, Zivanov, Ljiljana, Djuric, Snezana, Stojanovic, Goran, Menicanin, Aleksandar, "Efficiency analysis of simple structures of ferrite EMI suppressors in different ferrite materials" in 7th International Symposium Nikola Tesla, 1 (2011):93-100,
https://hdl.handle.net/21.15107/rcub_rimsi_3175 .

TY  - CONF
AU  - Damnjanovic, Mirjana
AU  - Zivanov, Ljiljana
AU  - Menicanin, Aleksandar
AU  - Maric, Andrea
AU  - Radosavljevic, Goran
AU  - Djuric, Snezana
PY  - 2011
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3172
AB  - In this paper, a modeling and characterization of ferrite transformer using vector network analyz- er (VNA) and specially developed PCB test fixture based on S-parameters measurement are pre- sented. The main advantage of this kind of measurement is high accuracy, due to elimination of many layout- and setup-related problems, which arise in practical implementation of ferrite com- ponents. Since the components can exhibit significant difference in performance for different lay- outs, they should be characterized by independent network parameters, such as S-parameters.
PB  - IEEE International Magnetics Conference INTERMAG 2011
C3  - IEEE International Magnetics Conference INTERMAG 2011
T1  - Ferrite transformer inductance modeling and extraction based on S-parameter measurement
SP  - AY-10 (1-4)
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_3172
ER  - 

@conference{
author = "Damnjanovic, Mirjana and Zivanov, Ljiljana and Menicanin, Aleksandar and Maric, Andrea and Radosavljevic, Goran and Djuric, Snezana",
year = "2011",
abstract = "In this paper, a modeling and characterization of ferrite transformer using vector network analyz- er (VNA) and specially developed PCB test fixture based on S-parameters measurement are pre- sented. The main advantage of this kind of measurement is high accuracy, due to elimination of many layout- and setup-related problems, which arise in practical implementation of ferrite com- ponents. Since the components can exhibit significant difference in performance for different lay- outs, they should be characterized by independent network parameters, such as S-parameters.",
publisher = "IEEE International Magnetics Conference INTERMAG 2011",
journal = "IEEE International Magnetics Conference INTERMAG 2011",
title = "Ferrite transformer inductance modeling and extraction based on S-parameter measurement",
pages = "AY-10 (1-4)",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_3172"
}

Damnjanovic, M., Zivanov, L., Menicanin, A., Maric, A., Radosavljevic, G.,& Djuric, S.. (2011). Ferrite transformer inductance modeling and extraction based on S-parameter measurement. in IEEE International Magnetics Conference INTERMAG 2011
IEEE International Magnetics Conference INTERMAG 2011., AY-10 (1-4).
https://hdl.handle.net/21.15107/rcub_rimsi_3172

Damnjanovic M, Zivanov L, Menicanin A, Maric A, Radosavljevic G, Djuric S. Ferrite transformer inductance modeling and extraction based on S-parameter measurement. in IEEE International Magnetics Conference INTERMAG 2011. 2011;:AY-10 (1-4).
https://hdl.handle.net/21.15107/rcub_rimsi_3172 .

Damnjanovic, Mirjana, Zivanov, Ljiljana, Menicanin, Aleksandar, Maric, Andrea, Radosavljevic, Goran, Djuric, Snezana, "Ferrite transformer inductance modeling and extraction based on S-parameter measurement" in IEEE International Magnetics Conference INTERMAG 2011 (2011):AY-10 (1-4),
https://hdl.handle.net/21.15107/rcub_rimsi_3172 .

TY  - CONF
AU  - Nagy, Laslo
AU  - Djuric, Snezana
AU  - Damnjanovic, Mirjana
AU  - Djuric, Nikola
AU  - Menicanin, Aleksandar
AU  - Zivanov, Ljiljana
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3170
AB  - In this paper a planar inductive displacement sensor is used to measure reaction force onto a foot of humanoid robot in order to determine the acting point of contact force applied on robot’s foot. The sensor was developed for individual application as displacement sensor implemented in a mechanical system which ensured that coils were constantly parallel.
PB  - IEEE, 11th Joint MMM-Intermag Conference
C3  - 11th Joint MMM-Intermag Conference
T1  - Inductive Displacement Sensor in Humanoid Robotic Application
SP  - HD-02/1822
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_3170
ER  - 

@conference{
author = "Nagy, Laslo and Djuric, Snezana and Damnjanovic, Mirjana and Djuric, Nikola and Menicanin, Aleksandar and Zivanov, Ljiljana",
year = "2010",
abstract = "In this paper a planar inductive displacement sensor is used to measure reaction force onto a foot of humanoid robot in order to determine the acting point of contact force applied on robot’s foot. The sensor was developed for individual application as displacement sensor implemented in a mechanical system which ensured that coils were constantly parallel.",
publisher = "IEEE, 11th Joint MMM-Intermag Conference",
journal = "11th Joint MMM-Intermag Conference",
title = "Inductive Displacement Sensor in Humanoid Robotic Application",
pages = "HD-02/1822",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_3170"
}

Nagy, L., Djuric, S., Damnjanovic, M., Djuric, N., Menicanin, A.,& Zivanov, L.. (2010). Inductive Displacement Sensor in Humanoid Robotic Application. in 11th Joint MMM-Intermag Conference
IEEE, 11th Joint MMM-Intermag Conference., HD-02/1822.
https://hdl.handle.net/21.15107/rcub_rimsi_3170

Nagy L, Djuric S, Damnjanovic M, Djuric N, Menicanin A, Zivanov L. Inductive Displacement Sensor in Humanoid Robotic Application. in 11th Joint MMM-Intermag Conference. 2010;:HD-02/1822.
https://hdl.handle.net/21.15107/rcub_rimsi_3170 .

Nagy, Laslo, Djuric, Snezana, Damnjanovic, Mirjana, Djuric, Nikola, Menicanin, Aleksandar, Zivanov, Ljiljana, "Inductive Displacement Sensor in Humanoid Robotic Application" in 11th Joint MMM-Intermag Conference (2010):HD-02/1822,
https://hdl.handle.net/21.15107/rcub_rimsi_3170 .