Приказ основних података о документу

dc.creatorBertoncelj, Barbara
dc.creatorVojisavljević, Katarina
dc.creatorVrabelj, Marko
dc.creatorMalic, Barbara
dc.date.accessioned2022-04-05T14:59:00Z
dc.date.available2022-04-05T14:59:00Z
dc.date.issued2015
dc.identifier.issn0352-9045
dc.identifier.urihttp://rimsi.imsi.bg.ac.rs/handle/123456789/911
dc.description.abstractThe influence of the fraction of the glass-fiber (EGF) reinforcement, from 0 to 15 wt%, on the thermal properties of the polymer-matrix composites with the CaCO3 mineral filler is studied. The proper ratio of glass-fibers and mineral filler is important for obtaining good mechanical, and at the same time good thermal properties of the composites used in production of high-quality components in electro industry. For this purpose, the thermal stability and the thermal properties of the fiber-reinforced composites are determined from a set of different characterization techniques and linked with the microstructural changes induced by the different fiber content. The composites are stable upon heating to 260 degrees C, and undergo thermal oxidation between 280 and 560 degrees C, as found by thermogravimetric and differential thermal analysis. The specific heat capacity, C-p, of the composites slightly increases with increasing EGF content for 0 to 10 wt% EGF, with respective values 0.899 J/gK and 0.903 J/gK at 20 degrees C. Slightly lower Cp values of the composite with 15 wt% EGF could be related to a non-uniform distribution of EGF and presence of voids evidenced by scanning electron microscopy. Thermal conductivity of the composites decreases with increasing EGF content from 0.960(6) W/mK to 0.878(2) W/mK for 0 and 15 wt% EGF, respectively.en
dc.publisherSoc Microelectronics, Electron Components Materials-Midem, Ljubljjana
dc.relationMinistry for Education, Science and Sport of the Republic of Slovenia
dc.relationEuropean Commission through the European Social Fund
dc.relationSlovenian Research AgencySlovenian Research Agency - Slovenia [P2-0105]
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceInformacije Midem-Journal of Microelectronics Electronic Components and Materials
dc.subjectthermal stabilityen
dc.subjectthermal conductivityen
dc.subjectspecific heat capacityen
dc.subjectglass-fiber compositesen
dc.titleThermal properties of polymer-matrix composites reinforced with E-glass fibersen
dc.typearticle
dc.rights.licenseBY
dc.citation.epage221
dc.citation.issue3
dc.citation.other45(3): 216-221
dc.citation.rankM23
dc.citation.spage216
dc.citation.volume45
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_rimsi_911
dc.identifier.wos000365602000006
dc.type.versionpublishedVersion


Документи

ДатотекеВеличинаФорматПреглед

Уз овај запис нема датотека.

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу