Reheating of Zinc-titanate Sintered Specimens
2015
Authors
Labus, Nebojša J.Mentus, S.
Rakic, S.
Đurić, Zorka Z
Vujančević, Jelena
Nikolić, Maria Vesna
Article (Published version)
Metadata
Show full item recordAbstract
The scope of this work was observing dimensional and heat transfer changes in ZnTiO3 samples during heating in nitrogen and air atmosphere. Interactions of bulk specimens with gaseous surrounding induce microstructure changes during heating. Sintered ZnTiO3 nanopowder samples were submitted to subsequent heating. Dilatation curves and thermogravimetric with simultaneous differential thermal analysis TGA/DTA curves were recorded. Reheating was performed in air and nitrogen atmospheres. Reheated samples obtained at different characteristic temperatures in air were analyzed by X-ray diffraction (XRD). Microstructures obtained by scanning electron microscopy (SEM) of reheated sintered samples are presented and compared. Reheating in a different atmosphere induced different microstructures. The goal was indicating possible causes leading to the microstructure changes.
Keywords:
Sintering / DilatometrySource:
Science of Sintering, 2015, 47, 1, 71-81Publisher:
- Međunarodni Institut za nauku o sinterovanju, Beograd
Funding / projects:
- Directed synthesis, structure and properties of multifunctional materials (RS-MESTD-Basic Research (BR or ON)-172057)
- Lithium-ion batteries and fuel cells - research and development (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45014)
DOI: 10.2298/SOS1501071L
ISSN: 0350-820X
WoS: 000355226700009
Scopus: 2-s2.0-84928801997
Collections
Institution/Community
Institut za multidisciplinarna istraživanjaTY - JOUR AU - Labus, Nebojša J. AU - Mentus, S. AU - Rakic, S. AU - Đurić, Zorka Z AU - Vujančević, Jelena AU - Nikolić, Maria Vesna PY - 2015 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/845 AB - The scope of this work was observing dimensional and heat transfer changes in ZnTiO3 samples during heating in nitrogen and air atmosphere. Interactions of bulk specimens with gaseous surrounding induce microstructure changes during heating. Sintered ZnTiO3 nanopowder samples were submitted to subsequent heating. Dilatation curves and thermogravimetric with simultaneous differential thermal analysis TGA/DTA curves were recorded. Reheating was performed in air and nitrogen atmospheres. Reheated samples obtained at different characteristic temperatures in air were analyzed by X-ray diffraction (XRD). Microstructures obtained by scanning electron microscopy (SEM) of reheated sintered samples are presented and compared. Reheating in a different atmosphere induced different microstructures. The goal was indicating possible causes leading to the microstructure changes. PB - Međunarodni Institut za nauku o sinterovanju, Beograd T2 - Science of Sintering T1 - Reheating of Zinc-titanate Sintered Specimens EP - 81 IS - 1 SP - 71 VL - 47 DO - 10.2298/SOS1501071L ER -
@article{ author = "Labus, Nebojša J. and Mentus, S. and Rakic, S. and Đurić, Zorka Z and Vujančević, Jelena and Nikolić, Maria Vesna", year = "2015", abstract = "The scope of this work was observing dimensional and heat transfer changes in ZnTiO3 samples during heating in nitrogen and air atmosphere. Interactions of bulk specimens with gaseous surrounding induce microstructure changes during heating. Sintered ZnTiO3 nanopowder samples were submitted to subsequent heating. Dilatation curves and thermogravimetric with simultaneous differential thermal analysis TGA/DTA curves were recorded. Reheating was performed in air and nitrogen atmospheres. Reheated samples obtained at different characteristic temperatures in air were analyzed by X-ray diffraction (XRD). Microstructures obtained by scanning electron microscopy (SEM) of reheated sintered samples are presented and compared. Reheating in a different atmosphere induced different microstructures. The goal was indicating possible causes leading to the microstructure changes.", publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd", journal = "Science of Sintering", title = "Reheating of Zinc-titanate Sintered Specimens", pages = "81-71", number = "1", volume = "47", doi = "10.2298/SOS1501071L" }
Labus, N. J., Mentus, S., Rakic, S., Đurić, Z. Z., Vujančević, J.,& Nikolić, M. V.. (2015). Reheating of Zinc-titanate Sintered Specimens. in Science of Sintering Međunarodni Institut za nauku o sinterovanju, Beograd., 47(1), 71-81. https://doi.org/10.2298/SOS1501071L
Labus NJ, Mentus S, Rakic S, Đurić ZZ, Vujančević J, Nikolić MV. Reheating of Zinc-titanate Sintered Specimens. in Science of Sintering. 2015;47(1):71-81. doi:10.2298/SOS1501071L .
Labus, Nebojša J., Mentus, S., Rakic, S., Đurić, Zorka Z, Vujančević, Jelena, Nikolić, Maria Vesna, "Reheating of Zinc-titanate Sintered Specimens" in Science of Sintering, 47, no. 1 (2015):71-81, https://doi.org/10.2298/SOS1501071L . .