Nanostructured Fe2O3/TiO2 thick films prepared by screen printing

2013
Аутори
Aleksić, ObradVasiljević, Zorka Z

Nikolić, Maria Vesna

Tasić, Nikola

Vuković, Marina

Marinković-Stanojević, Zorica

Nikolić, Nenad

Nikolić, Pantelija M.

Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Nanostructured single layered (pure TiO2, pure alpha-Fe2O3 and mixed Fe2O3/TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 degrees C and sintered at 650 degrees C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3/TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data.
Кључне речи:
thick films / screen printing / optical properties / nanostructures / microstructureИзвор:
Processing and Application of Ceramics, 2013, 7, 3, 129-134Издавач:
- Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
Финансирање / пројекти:
Институција/група
Institut za multidisciplinarna istraživanjaTY - JOUR AU - Aleksić, Obrad AU - Vasiljević, Zorka Z AU - Nikolić, Maria Vesna AU - Tasić, Nikola AU - Vuković, Marina AU - Marinković-Stanojević, Zorica AU - Nikolić, Nenad AU - Nikolić, Pantelija M. PY - 2013 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/711 AB - Nanostructured single layered (pure TiO2, pure alpha-Fe2O3 and mixed Fe2O3/TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 degrees C and sintered at 650 degrees C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3/TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data. PB - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad T2 - Processing and Application of Ceramics T1 - Nanostructured Fe2O3/TiO2 thick films prepared by screen printing EP - 134 IS - 3 SP - 129 VL - 7 DO - 10.2298/PAC1303129A ER -
@article{ author = "Aleksić, Obrad and Vasiljević, Zorka Z and Nikolić, Maria Vesna and Tasić, Nikola and Vuković, Marina and Marinković-Stanojević, Zorica and Nikolić, Nenad and Nikolić, Pantelija M.", year = "2013", abstract = "Nanostructured single layered (pure TiO2, pure alpha-Fe2O3 and mixed Fe2O3/TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen printing technology on a glass substrate. The pastes used for film preparation were obtained by adding an organic vehicle to the oxide powders together with a small percentage of binding glass frit. Samples were dried up to 100 degrees C and sintered at 650 degrees C/60 minutes. Structural, morphological and optical studies have been carried out using XRD, SEM analyses and UV/Vis spectroscopy. The prepared pure and mixed Fe2O3/TiO2 thick films had a homogenous nanostructure without secondary phases. Indirect band gaps were determined from the measured transmission spectra and the obtained values are in the range of literature data.", publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad", journal = "Processing and Application of Ceramics", title = "Nanostructured Fe2O3/TiO2 thick films prepared by screen printing", pages = "134-129", number = "3", volume = "7", doi = "10.2298/PAC1303129A" }
Aleksić, O., Vasiljević, Z. Z., Nikolić, M. V., Tasić, N., Vuković, M., Marinković-Stanojević, Z., Nikolić, N.,& Nikolić, P. M.. (2013). Nanostructured Fe2O3/TiO2 thick films prepared by screen printing. in Processing and Application of Ceramics Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 7(3), 129-134. https://doi.org/10.2298/PAC1303129A
Aleksić O, Vasiljević ZZ, Nikolić MV, Tasić N, Vuković M, Marinković-Stanojević Z, Nikolić N, Nikolić PM. Nanostructured Fe2O3/TiO2 thick films prepared by screen printing. in Processing and Application of Ceramics. 2013;7(3):129-134. doi:10.2298/PAC1303129A .
Aleksić, Obrad, Vasiljević, Zorka Z, Nikolić, Maria Vesna, Tasić, Nikola, Vuković, Marina, Marinković-Stanojević, Zorica, Nikolić, Nenad, Nikolić, Pantelija M., "Nanostructured Fe2O3/TiO2 thick films prepared by screen printing" in Processing and Application of Ceramics, 7, no. 3 (2013):129-134, https://doi.org/10.2298/PAC1303129A . .