RIMSI - Репозиторијум Института за мултидисциплинарна истраживања
Универзитет у Београду - Института за мултидисциплинарна истраживања
    • English
    • Српски
    • Српски (Serbia)
  • Српски (ћирилица) 
    • Енглески
    • Српски (ћирилица)
    • Српски (латиница)
  • Пријава
Преглед записа 
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • Преглед записа
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • Преглед записа
JavaScript is disabled for your browser. Some features of this site may not work without it.

Properties of lanthanum doped BaTiO3 produced from nanopowders

Само за регистроване кориснике
2010
Аутори
Vijatović-Petrović, Mirjana
Stojanović, Biljana D
Bobić, Jelena
Ramoska, T
Bowen, P
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документу
Апстракт
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders was performed at 1300 degrees C for 2, 4 and 8 h. XRD analysis showed cubic BT powders with crystallite sizes between 20 and 25 nm and tetragonal crystal structure of BT ceramics. The influence of sintering time on grain growth was fairly obvious. It was found that lanthanum doping has significant effect on powders particle size and ceramics grain size. The influence of lanthanum concentration on grain size inhibition, improving the dielectric properties of BT ceramics was detected. The relation between sintering time, grain size, structure and electrical properties of the BT ceramics was analyzed.
Кључне речи:
Precursors: organic / Microstructure / Dielectric properties / BaTiO3
Извор:
Ceramics International, 2010, 36, 6, 1817-1824
Издавач:
  • Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
  • COST 539
  • Синтеза нанопрахова и добијање керамике и нанокомпозита за примену у новим технологијама (RS-142059)
  • Синтеза, карактеризација и активност органских и координационих једињења и њихова примена у (био)нанотехнологији (RS-142010)

DOI: 10.1016/j.ceramint.2010.03.010

ISSN: 0272-8842

WoS: 000280027800009

Scopus: 2-s2.0-77953959053
[ Google Scholar ]
73
54
URI
http://rimsi.imsi.bg.ac.rs/handle/123456789/428
Колекције
  • Radovi istraživača / Researchers’ publications
Институција/група
Institut za multidisciplinarna istraživanja
TY  - JOUR
AU  - Vijatović-Petrović, Mirjana
AU  - Stojanović, Biljana D
AU  - Bobić, Jelena
AU  - Ramoska, T
AU  - Bowen, P
PY  - 2010
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/428
AB  - Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders was performed at 1300 degrees C for 2, 4 and 8 h. XRD analysis showed cubic BT powders with crystallite sizes between 20 and 25 nm and tetragonal crystal structure of BT ceramics. The influence of sintering time on grain growth was fairly obvious. It was found that lanthanum doping has significant effect on powders particle size and ceramics grain size. The influence of lanthanum concentration on grain size inhibition, improving the dielectric properties of BT ceramics was detected. The relation between sintering time, grain size, structure and electrical properties of the BT ceramics was analyzed.
PB  - Elsevier Sci Ltd, Oxford
T2  - Ceramics International
T1  - Properties of lanthanum doped BaTiO3 produced from nanopowders
EP  - 1824
IS  - 6
SP  - 1817
VL  - 36
DO  - 10.1016/j.ceramint.2010.03.010
ER  - 
@article{
author = "Vijatović-Petrović, Mirjana and Stojanović, Biljana D and Bobić, Jelena and Ramoska, T and Bowen, P",
year = "2010",
abstract = "Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic complexes. Sintering of pressed powders was performed at 1300 degrees C for 2, 4 and 8 h. XRD analysis showed cubic BT powders with crystallite sizes between 20 and 25 nm and tetragonal crystal structure of BT ceramics. The influence of sintering time on grain growth was fairly obvious. It was found that lanthanum doping has significant effect on powders particle size and ceramics grain size. The influence of lanthanum concentration on grain size inhibition, improving the dielectric properties of BT ceramics was detected. The relation between sintering time, grain size, structure and electrical properties of the BT ceramics was analyzed.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Ceramics International",
title = "Properties of lanthanum doped BaTiO3 produced from nanopowders",
pages = "1824-1817",
number = "6",
volume = "36",
doi = "10.1016/j.ceramint.2010.03.010"
}
Vijatović-Petrović, M., Stojanović, B. D., Bobić, J., Ramoska, T.,& Bowen, P.. (2010). Properties of lanthanum doped BaTiO3 produced from nanopowders. in Ceramics International
Elsevier Sci Ltd, Oxford., 36(6), 1817-1824.
https://doi.org/10.1016/j.ceramint.2010.03.010
Vijatović-Petrović M, Stojanović BD, Bobić J, Ramoska T, Bowen P. Properties of lanthanum doped BaTiO3 produced from nanopowders. in Ceramics International. 2010;36(6):1817-1824.
doi:10.1016/j.ceramint.2010.03.010 .
Vijatović-Petrović, Mirjana, Stojanović, Biljana D, Bobić, Jelena, Ramoska, T, Bowen, P, "Properties of lanthanum doped BaTiO3 produced from nanopowders" in Ceramics International, 36, no. 6 (2010):1817-1824,
https://doi.org/10.1016/j.ceramint.2010.03.010 . .

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму RIMSI | Пошаљите запажања

OpenAIRERCUB
 

 

Комплетан репозиторијумГрупеАуториНасловиТемеОва институцијаАуториНасловиТеме

Статистика

Преглед статистика

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму RIMSI | Пошаљите запажања

OpenAIRERCUB