Приказ основних података о документу

dc.creatorPavlović, Vladimir B
dc.creatorStojanović, Biljana D
dc.creatorŽivković, Ljiljana
dc.creatorBranković, Goran
dc.creatorRistic, Momcilo M.
dc.date.accessioned2022-04-05T14:00:10Z
dc.date.available2022-04-05T14:00:10Z
dc.date.issued1996
dc.identifier.issn0015-0193
dc.identifier.urihttp://rimsi.imsi.bg.ac.rs/handle/123456789/35
dc.description.abstractThe sintering behavior of BaTiO3 with LiF showed that it was possible to sinter barium titanate at temperatures below 1000 degrees C. Different combinations of the sintering powders were prepared by adding 1 to 5 w% LiF and sintering at the temperature of 950 degrees C for 20 hours. The grain growth of LiF fluxed BaTiO3 was studied, and electron microscopy was used to investigate and characterize the microstructure of the samples. The dielectric constant and dielectric losses were determined. It was shown that the composition of the liquid phase formed during this process had a prominent influence on the grain growth and on the formation of BaTiO3 with better dielectric properties.en
dc.publisherTaylor & Francis Ltd, Abingdon
dc.relationSerbian Academy of Sciences and Arts
dc.relationMinistry for Science and Technology of SerbiaMinistry of Education, Science & Technological Development, Serbia
dc.rightsrestrictedAccess
dc.sourceFerroelectrics
dc.subjectgrain growth
dc.subjectBarium titanate
dc.subjectLithium fluoride
dc.subjectsintering
dc.subjectliquid phase sintering
dc.subjectdielectric constant
dc.titleGrain growth during sintering of batio3 with lifen
dc.typearticle
dc.rights.licenseARR
dc.citation.epage168
dc.citation.other186: 165-168
dc.citation.spage165
dc.citation.volume186
dc.identifier.doi10.1080/00150199608218057
dc.identifier.scopus2-s2.0-0030370660
dc.identifier.wos000208178700040
dc.type.versionpublishedVersion


Документи

ДатотекеВеличинаФорматПреглед

Уз овај запис нема датотека.

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу