RIMSI - Repository of Institute for Multidisciplinary Research
University of Belgrade - Institute for Multidisciplinary Research
    • English
    • Српски
    • Српски (Serbia)
  • English 
    • English
    • Serbian (Cyrillic)
    • Serbian (Latin)
  • Login
View Item 
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • View Item
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Grain growth during sintering of batio3 with lif

No Thumbnail
Authors
Pavlović, Vladimir B
Stojanović, Biljana D
Živković, Ljiljana
Branković, Goran
Ristic, Momcilo M.
Article (Published version)
Metadata
Show full item record
Abstract
The sintering behavior of BaTiO3 with LiF showed that it was possible to sinter barium titanate at temperatures below 1000 degrees C. Different combinations of the sintering powders were prepared by adding 1 to 5 w% LiF and sintering at the temperature of 950 degrees C for 20 hours. The grain growth of LiF fluxed BaTiO3 was studied, and electron microscopy was used to investigate and characterize the microstructure of the samples. The dielectric constant and dielectric losses were determined. It was shown that the composition of the liquid phase formed during this process had a prominent influence on the grain growth and on the formation of BaTiO3 with better dielectric properties.
Keywords:
grain growth / Barium titanate / Lithium fluoride / sintering / liquid phase sintering / dielectric constant
Source:
Ferroelectrics, 1996, 186, 165-168
Publisher:
  • Taylor & Francis Ltd, Abingdon
Funding / projects:
  • Serbian Academy of Sciences and Arts
  • Ministry for Science and Technology of SerbiaMinistry of Education, Science & Technological Development, Serbia

DOI: 10.1080/00150199608218057

ISSN: 0015-0193

WoS: 000208178700040

Scopus: 2-s2.0-0030370660
[ Google Scholar ]
6
7
URI
http://rimsi.imsi.bg.ac.rs/handle/123456789/35
Collections
  • Radovi istraživača / Researchers’ publications
Institution/Community
Institut za multidisciplinarna istraživanja
TY  - JOUR
AU  - Pavlović, Vladimir B
AU  - Stojanović, Biljana D
AU  - Živković, Ljiljana
AU  - Branković, Goran
AU  - Ristic, Momcilo M.
PY  - 1996
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/35
AB  - The sintering behavior of BaTiO3 with LiF showed that it was possible to sinter barium titanate at temperatures below 1000 degrees C. Different combinations of the sintering powders were prepared by adding 1 to 5 w% LiF and sintering at the temperature of 950 degrees C for 20 hours. The grain growth of LiF fluxed BaTiO3 was studied, and electron microscopy was used to investigate and characterize the microstructure of the samples. The dielectric constant and dielectric losses were determined. It was shown that the composition of the liquid phase formed during this process had a prominent influence on the grain growth and on the formation of BaTiO3 with better dielectric properties.
PB  - Taylor & Francis Ltd, Abingdon
T2  - Ferroelectrics
T1  - Grain growth during sintering of batio3 with lif
EP  - 168
SP  - 165
VL  - 186
DO  - 10.1080/00150199608218057
ER  - 
@article{
author = "Pavlović, Vladimir B and Stojanović, Biljana D and Živković, Ljiljana and Branković, Goran and Ristic, Momcilo M.",
year = "1996",
abstract = "The sintering behavior of BaTiO3 with LiF showed that it was possible to sinter barium titanate at temperatures below 1000 degrees C. Different combinations of the sintering powders were prepared by adding 1 to 5 w% LiF and sintering at the temperature of 950 degrees C for 20 hours. The grain growth of LiF fluxed BaTiO3 was studied, and electron microscopy was used to investigate and characterize the microstructure of the samples. The dielectric constant and dielectric losses were determined. It was shown that the composition of the liquid phase formed during this process had a prominent influence on the grain growth and on the formation of BaTiO3 with better dielectric properties.",
publisher = "Taylor & Francis Ltd, Abingdon",
journal = "Ferroelectrics",
title = "Grain growth during sintering of batio3 with lif",
pages = "168-165",
volume = "186",
doi = "10.1080/00150199608218057"
}
Pavlović, V. B., Stojanović, B. D., Živković, L., Branković, G.,& Ristic, M. M.. (1996). Grain growth during sintering of batio3 with lif. in Ferroelectrics
Taylor & Francis Ltd, Abingdon., 186, 165-168.
https://doi.org/10.1080/00150199608218057
Pavlović VB, Stojanović BD, Živković L, Branković G, Ristic MM. Grain growth during sintering of batio3 with lif. in Ferroelectrics. 1996;186:165-168.
doi:10.1080/00150199608218057 .
Pavlović, Vladimir B, Stojanović, Biljana D, Živković, Ljiljana, Branković, Goran, Ristic, Momcilo M., "Grain growth during sintering of batio3 with lif" in Ferroelectrics, 186 (1996):165-168,
https://doi.org/10.1080/00150199608218057 . .

DSpace software copyright © 2002-2015  DuraSpace
About RIMSI | Send Feedback

OpenAIRERCUB
 

 

All of DSpaceCommunitiesAuthorsTitlesSubjectsThis institutionAuthorsTitlesSubjects

Statistics

View Usage Statistics

DSpace software copyright © 2002-2015  DuraSpace
About RIMSI | Send Feedback

OpenAIRERCUB