Characterization of Barium Titanate Ceramic Powders by Raman Spectroscopy

Abstract

Barium titanate, BaTiO3 ceramic powders were prepared by mechanochemical synthesis and by the Pechini method. A powder mixture of BaO and TiO2 was treated in a planetary ball mill in an air atmosphere for Lip to 1 h, using zirconium oxide vial and zirconium oxide balls as the milling medium. After 60 min BaTiO3 phase was formed. In both ways BaTiO3 ceramics were sintered after 2 h on 1300 degrees C without pre-calcinations step. The heating rate was 10 degrees C min(-1). The formation of phase and crystal structure of BaTiO3 was approved by X-ray diffraction analysis and the Raman spectroscopy. The morphology and microstructure of obtained powders were examined by scanning electron microscopy method. Sharp phase transition from ferroelectric to paraelectric state was observed. The hysteresis loop is very well performed with regular sharp characteristic of ferroelectric materials.