RIMSI - Repository of Institute for Multidisciplinary Research
University of Belgrade - Institute for Multidisciplinary Research
    • English
    • Српски
    • Српски (Serbia)
  • English 
    • English
    • Serbian (Cyrillic)
    • Serbian (Latin)
  • Login
View Item 
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • View Item
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.

Influence of substrate orientation on the morphologyand orientation of LaNiO3 thin films

No Thumbnail
Authors
Počuča-Nešić, Milica
Branković, Zorica
Branković, Goran
Vasiljević-Radović, Dana
Article (Published version)
Metadata
Show full item record
Abstract
LaNiO3 thin films were successfully prepared by a chemical method from citrate precursors. The LNO precursor solution was spin-coated onto Si (100) and Si (111) substrates. To obtain epitaxial or highly oriented films, the deposited layers were slowly heated in a gradient thermal field, with a heating rate of 1 degrees min(-1), and annealed at 700 degrees C. The influence of different substrate orientations on the thin film morphology was investigated using atomic force microscopy and X-ray diffraction analysis. Well-crystallized films with grains aligned along a certain direction were obtained on both substrates. Films deposited on both substrates were very smooth, but with a different grain size and shape depending on the crystal orientation. Films deposited on Si (100) grew in the (110) direction and had elongated grains, whereas those on Si (111) grew in the (211) direction and had a quasi-square grain shape.
Keywords:
thin film / microstructure / LaNiO3 / AFM
Source:
Journal of Microscopy, 2008, 232, 3, 585-588
Publisher:
  • Wiley, Hoboken
Funding / projects:
  • Ministry of Science and Environmental Protection of the Republic of SerbiaMinistry of Education, Science & Technological Development, Serbia

DOI: 10.1111/j.1365-2818.2008.02121.x

ISSN: 0022-2720

PubMed: 19094043

WoS: 000261253200029

Scopus: 2-s2.0-57449108088
[ Google Scholar ]
5
5
URI
http://rimsi.imsi.bg.ac.rs/handle/123456789/263
Collections
  • Radovi istraživača / Researchers’ publications
Institution/Community
Institut za multidisciplinarna istraživanja
TY  - JOUR
AU  - Počuča-Nešić, Milica
AU  - Branković, Zorica
AU  - Branković, Goran
AU  - Vasiljević-Radović, Dana
PY  - 2008
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/263
AB  - LaNiO3 thin films were successfully prepared by a chemical method from citrate precursors. The LNO precursor solution was spin-coated onto Si (100) and Si (111) substrates. To obtain epitaxial or highly oriented films, the deposited layers were slowly heated in a gradient thermal field, with a heating rate of 1 degrees min(-1), and annealed at 700 degrees C. The influence of different substrate orientations on the thin film morphology was investigated using atomic force microscopy and X-ray diffraction analysis. Well-crystallized films with grains aligned along a certain direction were obtained on both substrates. Films deposited on both substrates were very smooth, but with a different grain size and shape depending on the crystal orientation. Films deposited on Si (100) grew in the (110) direction and had elongated grains, whereas those on Si (111) grew in the (211) direction and had a quasi-square grain shape.
PB  - Wiley, Hoboken
T2  - Journal of Microscopy
T1  - Influence of substrate orientation on the morphologyand orientation of LaNiO3 thin films
EP  - 588
IS  - 3
SP  - 585
VL  - 232
DO  - 10.1111/j.1365-2818.2008.02121.x
ER  - 
@article{
author = "Počuča-Nešić, Milica and Branković, Zorica and Branković, Goran and Vasiljević-Radović, Dana",
year = "2008",
abstract = "LaNiO3 thin films were successfully prepared by a chemical method from citrate precursors. The LNO precursor solution was spin-coated onto Si (100) and Si (111) substrates. To obtain epitaxial or highly oriented films, the deposited layers were slowly heated in a gradient thermal field, with a heating rate of 1 degrees min(-1), and annealed at 700 degrees C. The influence of different substrate orientations on the thin film morphology was investigated using atomic force microscopy and X-ray diffraction analysis. Well-crystallized films with grains aligned along a certain direction were obtained on both substrates. Films deposited on both substrates were very smooth, but with a different grain size and shape depending on the crystal orientation. Films deposited on Si (100) grew in the (110) direction and had elongated grains, whereas those on Si (111) grew in the (211) direction and had a quasi-square grain shape.",
publisher = "Wiley, Hoboken",
journal = "Journal of Microscopy",
title = "Influence of substrate orientation on the morphologyand orientation of LaNiO3 thin films",
pages = "588-585",
number = "3",
volume = "232",
doi = "10.1111/j.1365-2818.2008.02121.x"
}
Počuča-Nešić, M., Branković, Z., Branković, G.,& Vasiljević-Radović, D.. (2008). Influence of substrate orientation on the morphologyand orientation of LaNiO3 thin films. in Journal of Microscopy
Wiley, Hoboken., 232(3), 585-588.
https://doi.org/10.1111/j.1365-2818.2008.02121.x
Počuča-Nešić M, Branković Z, Branković G, Vasiljević-Radović D. Influence of substrate orientation on the morphologyand orientation of LaNiO3 thin films. in Journal of Microscopy. 2008;232(3):585-588.
doi:10.1111/j.1365-2818.2008.02121.x .
Počuča-Nešić, Milica, Branković, Zorica, Branković, Goran, Vasiljević-Radović, Dana, "Influence of substrate orientation on the morphologyand orientation of LaNiO3 thin films" in Journal of Microscopy, 232, no. 3 (2008):585-588,
https://doi.org/10.1111/j.1365-2818.2008.02121.x . .

DSpace software copyright © 2002-2015  DuraSpace
About RIMSI | Send Feedback

OpenAIRERCUB
 

 

All of DSpaceCommunitiesAuthorsTitlesSubjectsThis institutionAuthorsTitlesSubjects

Statistics

View Usage Statistics

DSpace software copyright © 2002-2015  DuraSpace
About RIMSI | Send Feedback

OpenAIRERCUB