INFLUENCE OF CALCINATION TEMPERATURE ON THE STRUCTURE, MORPHOLOGY AND OPTICAL PROPERTIES OF ELECTROSPUN PSEUDOBROOKITE NANOFIBERS
Autori
Vasiljević, Zorka Z![](/themes/MirageRIMSI/images/orcid.png)
Dojčinović, Milena
![](/themes/MirageRIMSI/images/orcid.png)
Vujancevic, Jelena
Spreitzer, Matjaz
![](/themes/MirageRIMSI/images/orcid.png)
Kovač, Janez
Jankovic-Castvan, Ivona
Bartolić, Dragana
![](/themes/MirageRIMSI/images/orcid.png)
Markovic, Smilja
Tadic, Nenad
Nikolić, Maria Vesna
![](/themes/MirageRIMSI/images/orcid.png)
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Novel crystalline iron-titanate fibers were synthesized for the first time to the best of our knowledge, through a simple, low cost electrospinning method followed by calcination treatment at different temperatures (500–750 °C for 3 h and at 500 °C for 6 h and at 550 °C for 4 h). The fibers were prepared from a precursor solution containing polyvinylpyrrolidone (PVP), iron(III) nonahydrate, titanium isopropoxide, N,N-Dimethylformamide and ethanol. As spun fibers were smooth, straight, beadless and uniform forming a nonwoven fibrous mat, with an average diameter of ca. 205 nm. Upon calcination in air the PVP matrice was removed and XRD and FTIR analysis showed that the duration of the calcination process, besides the temperature, had a direct influence on phase formation. Pure phase of pseudobrookite was obtained at 600 °C, 500 °C for 6 h and at 550 °C for 4 h. In addition, the morphology of obtained nanofibers was directly affected by the calcination temperature. The surface of fibers ...obtained after calcination was no longer smooth and the fiber diameter decreased due to complete degradation of PVP. At 700 oC and 750 °C, fibers were thicker which can be attributed to growth of Fe2TiO5 nanoparticles and simultaneous coalescence of small particles. All samples exhibited a type IV nitrogen adsorption isotherm with a type- H3 indicating slit-shaped mesoporous structure. The BET surface areas of 500 oC for 6 h, 550 oC for 4 h and 600 oC for 3 h were estimated to be 62, 38.7 and 33.2 m2/g, respectively.
Ključne reči:
Iron titanate, Electrospinning, nanofibers, XRD, BET surface areaIzvor:
Abstract book/14th ECerS conference for young scientist in ceramics, 2021Izdavač:
- University of Novi Sad, Faculty of Technology Novi Sad
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200053 (Univerzitet u Beogradu, Institut za multidisciplinarna istraživanja) (RS-MESTD-inst-2020-200053)
Institucija/grupa
Institut za multidisciplinarna istraživanjaTY - CONF AU - Vasiljević, Zorka Z AU - Dojčinović, Milena AU - Vujancevic, Jelena AU - Spreitzer, Matjaz AU - Kovač, Janez AU - Jankovic-Castvan, Ivona AU - Bartolić, Dragana AU - Markovic, Smilja AU - Tadic, Nenad AU - Nikolić, Maria Vesna PY - 2021 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/2197 AB - Novel crystalline iron-titanate fibers were synthesized for the first time to the best of our knowledge, through a simple, low cost electrospinning method followed by calcination treatment at different temperatures (500–750 °C for 3 h and at 500 °C for 6 h and at 550 °C for 4 h). The fibers were prepared from a precursor solution containing polyvinylpyrrolidone (PVP), iron(III) nonahydrate, titanium isopropoxide, N,N-Dimethylformamide and ethanol. As spun fibers were smooth, straight, beadless and uniform forming a nonwoven fibrous mat, with an average diameter of ca. 205 nm. Upon calcination in air the PVP matrice was removed and XRD and FTIR analysis showed that the duration of the calcination process, besides the temperature, had a direct influence on phase formation. Pure phase of pseudobrookite was obtained at 600 °C, 500 °C for 6 h and at 550 °C for 4 h. In addition, the morphology of obtained nanofibers was directly affected by the calcination temperature. The surface of fibers obtained after calcination was no longer smooth and the fiber diameter decreased due to complete degradation of PVP. At 700 oC and 750 °C, fibers were thicker which can be attributed to growth of Fe2TiO5 nanoparticles and simultaneous coalescence of small particles. All samples exhibited a type IV nitrogen adsorption isotherm with a type- H3 indicating slit-shaped mesoporous structure. The BET surface areas of 500 oC for 6 h, 550 oC for 4 h and 600 oC for 3 h were estimated to be 62, 38.7 and 33.2 m2/g, respectively. PB - University of Novi Sad, Faculty of Technology Novi Sad C3 - Abstract book/14th ECerS conference for young scientist in ceramics T1 - INFLUENCE OF CALCINATION TEMPERATURE ON THE STRUCTURE, MORPHOLOGY AND OPTICAL PROPERTIES OF ELECTROSPUN PSEUDOBROOKITE NANOFIBERS UR - https://hdl.handle.net/21.15107/rcub_rimsi_2197 ER -
@conference{ author = "Vasiljević, Zorka Z and Dojčinović, Milena and Vujancevic, Jelena and Spreitzer, Matjaz and Kovač, Janez and Jankovic-Castvan, Ivona and Bartolić, Dragana and Markovic, Smilja and Tadic, Nenad and Nikolić, Maria Vesna", year = "2021", abstract = "Novel crystalline iron-titanate fibers were synthesized for the first time to the best of our knowledge, through a simple, low cost electrospinning method followed by calcination treatment at different temperatures (500–750 °C for 3 h and at 500 °C for 6 h and at 550 °C for 4 h). The fibers were prepared from a precursor solution containing polyvinylpyrrolidone (PVP), iron(III) nonahydrate, titanium isopropoxide, N,N-Dimethylformamide and ethanol. As spun fibers were smooth, straight, beadless and uniform forming a nonwoven fibrous mat, with an average diameter of ca. 205 nm. Upon calcination in air the PVP matrice was removed and XRD and FTIR analysis showed that the duration of the calcination process, besides the temperature, had a direct influence on phase formation. Pure phase of pseudobrookite was obtained at 600 °C, 500 °C for 6 h and at 550 °C for 4 h. In addition, the morphology of obtained nanofibers was directly affected by the calcination temperature. The surface of fibers obtained after calcination was no longer smooth and the fiber diameter decreased due to complete degradation of PVP. At 700 oC and 750 °C, fibers were thicker which can be attributed to growth of Fe2TiO5 nanoparticles and simultaneous coalescence of small particles. All samples exhibited a type IV nitrogen adsorption isotherm with a type- H3 indicating slit-shaped mesoporous structure. The BET surface areas of 500 oC for 6 h, 550 oC for 4 h and 600 oC for 3 h were estimated to be 62, 38.7 and 33.2 m2/g, respectively.", publisher = "University of Novi Sad, Faculty of Technology Novi Sad", journal = "Abstract book/14th ECerS conference for young scientist in ceramics", title = "INFLUENCE OF CALCINATION TEMPERATURE ON THE STRUCTURE, MORPHOLOGY AND OPTICAL PROPERTIES OF ELECTROSPUN PSEUDOBROOKITE NANOFIBERS", url = "https://hdl.handle.net/21.15107/rcub_rimsi_2197" }
Vasiljević, Z. Z., Dojčinović, M., Vujancevic, J., Spreitzer, M., Kovač, J., Jankovic-Castvan, I., Bartolić, D., Markovic, S., Tadic, N.,& Nikolić, M. V.. (2021). INFLUENCE OF CALCINATION TEMPERATURE ON THE STRUCTURE, MORPHOLOGY AND OPTICAL PROPERTIES OF ELECTROSPUN PSEUDOBROOKITE NANOFIBERS. in Abstract book/14th ECerS conference for young scientist in ceramics University of Novi Sad, Faculty of Technology Novi Sad.. https://hdl.handle.net/21.15107/rcub_rimsi_2197
Vasiljević ZZ, Dojčinović M, Vujancevic J, Spreitzer M, Kovač J, Jankovic-Castvan I, Bartolić D, Markovic S, Tadic N, Nikolić MV. INFLUENCE OF CALCINATION TEMPERATURE ON THE STRUCTURE, MORPHOLOGY AND OPTICAL PROPERTIES OF ELECTROSPUN PSEUDOBROOKITE NANOFIBERS. in Abstract book/14th ECerS conference for young scientist in ceramics. 2021;. https://hdl.handle.net/21.15107/rcub_rimsi_2197 .
Vasiljević, Zorka Z, Dojčinović, Milena, Vujancevic, Jelena, Spreitzer, Matjaz, Kovač, Janez, Jankovic-Castvan, Ivona, Bartolić, Dragana, Markovic, Smilja, Tadic, Nenad, Nikolić, Maria Vesna, "INFLUENCE OF CALCINATION TEMPERATURE ON THE STRUCTURE, MORPHOLOGY AND OPTICAL PROPERTIES OF ELECTROSPUN PSEUDOBROOKITE NANOFIBERS" in Abstract book/14th ECerS conference for young scientist in ceramics (2021), https://hdl.handle.net/21.15107/rcub_rimsi_2197 .