Претраживање
Приказ резултата 1-10 од 10
Spark plasma sintering of hydrothermally synthesized bismuth ferrite
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2016)
Bismuth ferrite, BiFeO3 (BFO), powder was synthesized by hydrothermal method from Bi(NO3)(3)center dot 5H(2)O and Fe(NO3)(3)center dot 9H(2)O as precursors. The synthesized powder was further sintered using spark plasma ...
Nanostructured Fe2O3/TiO2 thick films prepared by screen printing
(Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad, 2013)
Nanostructured single layered (pure TiO2, pure alpha-Fe2O3 and mixed Fe2O3/TiO2 with two different oxide ratios, 2 : 3 and 3 : 2) and double layered (TiO2 layer over a Fe2O3 layer) thick films have been fabricated by screen ...
Comparison of two alkali-activated systems: mechanically activated fly ash and fly ash-blast furnace slag blends
(Elsevier Science Bv, Amsterdam, 2015)
Poor reactivity of fly ash (FA) in alkali activation process can be improved either by mechanical activation of fly ash or by blending fly ash with more reactive material, such as blast furnace slag (BFS). Both options ...
THE RELATIONSHIP BETWEEN FLY ASH-BASED GEOPOLYMER STRENGTH AND MAJOR STRUCTURAL ELEMENTS
(Institute for Multidisciplinary Research, University of Belgrade, 2013)
Geopolymers are relatively new type of inorganic binder materials, which can partly substitute Portland cement. Application of geopolymer binders is very favorable from ecological point of view for two reasons: because of ...
STRUCTURAL AND MICROSTRUCTURAL CHARACTERIZATION OF BST CERAMICS OBTAINED BY HYDROTHERMALLY ASSISTED COMPLEX POLYMERIZATION METHOD
(Institute for Multidisciplinary Research, University of Belgrade, 2013)
Barium strontium titanate powder Ba0.8Sr0.2TiO3 (BST) has been obtained by hydrothermal treatment of precursor solution containing titanium citrate, previously prepared by complex polymerization method, and barium and ...
Microstructure, mechanical and electrical properties of Glass Fiber Reinforced Composites (GFRC)
(Mednarodna podiplomska ²ola Joºefa Stefana, Ljubljana, 2015)
In this study, the influence of E-glass fiber and mineral filler content
on the microstructure, physical, mechanical and dielectric properties of Glass
Fiber Reinforced Composites (GFRC) was investigated. Five sets of ...
TEM and FESEM investigation of lanthanum nickelate thin films obtained by chemical solution deposition
(University of Novi Sad, 2012)
Lanthanum nickelate (LNO) is a perovskite oxide material with metallic conductivity in a wide temperature
range which makes it suitable for application as electrode material for thin films. In this paper LNO thin films
were ...
Processing-Dependent Dielectric and Ferroelectric Properties of BST Ceramics
(Vilnius University, Vilnius, Lithuania, 2014)
Barium strontium titanate, BaxSr1-xTiO3 (BST) ceramics have been extensively used as in a microelectronics due
to its excellent ferroelectric, dielectric, piezoelectric, and pyroelectric properties [1–3]. At room ...
NIOBIUM DOPED BARIUM BISMUTH-TITANATE CERAMICS
(Faculty of Technology, University of Novi Sad Bul. cara Lazara 1, 21000 Novi Sad, Serbia, 2011)
Ferroelectric materials with diffuse phase transition (DPT) charactreristics and/or
relaxor properties have been exstensively studied in the last few decades mainly due to
their very interesting and still not completely ...
Microstructural analysis of Bulk Molding Compounds and correlation with the flexural strength
(Mednarodna podiplomska šola Jožefa Stefana, Ljubljana, 2016)
In this study, the influence of the glass fiber (GF) content on the
microstructure and flexural strength of bulk molding compounds (BMCs) is
investigated. Three sets of BMCs with different weight fractions of GF
(5/10/12.5 ...