Search
Now showing items 1-10 of 36
Preparation, sintering and electrical properties of nano-grained multidoped ceria
(Elsevier Sci Ltd, Oxford, 2010)
Multiply doped ceria nanopowders were synthesized by applying MGNP (modified glycine/nitrate procedure). The overall concentration of dopants was kept constant (x = 0.2) whereby Gd ion as the main dopant was gradually ...
Effect of preparation route on the microstructure and electrical conductivity of co-doped ceria
(Elsevier Sci Ltd, Oxford, 2013)
Dense Ce0.8Sm0.1Gd0.1O2-delta electrolytes were fabricated by sintering of CeO2 solid solutions which were prepared from metal nitrates and NaOH using self propagating room temperature synthesis (SPRT). Three different ...
Chemical stability and electrical properties of Nb doped BaCe0.9Y0.1O3-delta as a high temperature proton conducting electrolyte for IT-SOFC
(Elsevier Sci Ltd, Oxford, 2013)
BaCe0.9-xNbxY0.1O3-delta (where x=0, 0.01, 0.03 and 0.05) powders were synthesized by solid-state reaction to investigate the influence of Nb concentration on chemical stability and electrical properties of the sintered ...
Comparative study of CeO2 nanopowders obtained by the hydrothermal method from various precursors
(Elsevier Sci Ltd, Oxford, 2015)
The effects of common precursors used in the synthesis of CeO2 nanopowders were investigated, and the structural and spectral properties of the resulting products were compared. Two cerium (III) salts, i.e., Ce(NO3)(3)center ...
Dielectric and magnetic properties of BaTiO3-NiFe2O4 multiferroic composites
(Elsevier Sci Ltd, Oxford, 2014)
Multiferroic composites with the general formula x BaTiO3-(1-x) NiFe2O4 (x=0.5, 0.7, 0.8) were prepared by mixing chemically obtained nickel ferrite and barium titanate powders. Optimum processing parameters for a reduction ...
Structure and properties of chemically synthesized BiFeO3. Influence of fuel and complexing agent
(Elsevier Sci Ltd, Oxford, 2015)
Perovskite, single multiferroic bismuth ferrite was prepared by two chemical methods: auto-combustion and soft chemical route. Influence of different fuels and complexing agents and thermal treatment on purity of bismuth ...
Dielectric and ferroelectric properties of Ho-doped BiFeO3 nanopowders across the structural phase transition
(Elsevier Sci Ltd, Oxford, 2017)
We have studied Ho-doped BiFeO3 nanopowders (Bi1-xHoxFeO3, x = 0-0.15), prepared via sol-gel method, in order to analyse the effect of substitution-driven structural transition on dielectric and ferroelectric properties ...
Improvement of barium titanate properties induced by attrition milling
(Elsevier Sci Ltd, Oxford, 2012)
Barium titanate powder was prepared by soft chemical process from polymeric precursors (modified Pechini process). The synthesized barium titanate (BT) powder was nanosized and the factor of agglomeration (F-agg) pointed ...
Influence of mechanical activation on sphene based ceramic material synthesis
(Elsevier Sci Ltd, Oxford, 2013)
Sphene (CaTiSiO5), a calcium titanosilicate ceramic has been prepared from a powder mixture of CaCO3, TiO2 and SiO2 using vibromilling for homogenization and activation of precursors. The mechanochemical process initially ...
High-voltage electrophoretic deposition of preferentially oriented films from multiferroic YMn2O5 nanopowders
(Elsevier Sci Ltd, Oxford, 2013)
Processing of the YMn2O5 powder is very challenging, since it decomposes to YMnO3 and Mn3O4 at temperatures close to 1180 degrees C, while samples consolidation commonly demands high temperatures. The main goal of this ...