Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Anorthite ceramics was fabricated from calcium exchanged Na-LTA zeolite. The powder compacts of Ca-LTA zeolite were sintered at different temperatures ranging between 1100 and 1400°C. It was found that the temperature of 1100°C was sufficiently high to trigger formation of anorthite which stayed stable even at temperature as high as 1400°C. The highest relative density and the lowest open porosity were measured in samples sintered at 1200°C for 3 h. The effect of milling time of Ca-LTA zeolite precursor on density, microstructure and mechanical properties of samples sintered at 1200°C for 3 h was investigated. The particle size refinement appeared to be beneficial in accelerating densification process and improving mechanical properties. The density, compressive strength and hardness of anorthite ceramics obtained from non-milled precursor were measured to be 70.5 %TD, 64 MPa and 1.45 GPa, respectively. On the other side the anorthite ceramics obtained from 24-hour-long milled zeolite ...precursor had density of 83.9 %TD, compressive strength of 101 MPa and hardness of 3.44 GPa.
Ključne reči:
Ca-LTA / ball milling / sintering / thermal transformation / anorthiteIzvor:
Science of Sintering, 2022, 54, 3, 349-358Izdavač:
- International Institute for the Science of Sintering
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200017 (Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd-Vinča) (RS-MESTD-inst-2020-200017)
Institucija/grupa
Institut za multidisciplinarna istraživanjaTY - JOUR AU - Omerašević, Mia AU - Baščarević, Zvezdana AU - Vujasin, Radojka AU - Devečerski, Aleksandar AU - Bučevac, Dušan PY - 2022 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/1572 AB - Anorthite ceramics was fabricated from calcium exchanged Na-LTA zeolite. The powder compacts of Ca-LTA zeolite were sintered at different temperatures ranging between 1100 and 1400°C. It was found that the temperature of 1100°C was sufficiently high to trigger formation of anorthite which stayed stable even at temperature as high as 1400°C. The highest relative density and the lowest open porosity were measured in samples sintered at 1200°C for 3 h. The effect of milling time of Ca-LTA zeolite precursor on density, microstructure and mechanical properties of samples sintered at 1200°C for 3 h was investigated. The particle size refinement appeared to be beneficial in accelerating densification process and improving mechanical properties. The density, compressive strength and hardness of anorthite ceramics obtained from non-milled precursor were measured to be 70.5 %TD, 64 MPa and 1.45 GPa, respectively. On the other side the anorthite ceramics obtained from 24-hour-long milled zeolite precursor had density of 83.9 %TD, compressive strength of 101 MPa and hardness of 3.44 GPa. PB - International Institute for the Science of Sintering T2 - Science of Sintering T1 - Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite EP - 358 IS - 3 SP - 349 VL - 54 DO - 10.2298/SOS2203349O ER -
@article{ author = "Omerašević, Mia and Baščarević, Zvezdana and Vujasin, Radojka and Devečerski, Aleksandar and Bučevac, Dušan", year = "2022", abstract = "Anorthite ceramics was fabricated from calcium exchanged Na-LTA zeolite. The powder compacts of Ca-LTA zeolite were sintered at different temperatures ranging between 1100 and 1400°C. It was found that the temperature of 1100°C was sufficiently high to trigger formation of anorthite which stayed stable even at temperature as high as 1400°C. The highest relative density and the lowest open porosity were measured in samples sintered at 1200°C for 3 h. The effect of milling time of Ca-LTA zeolite precursor on density, microstructure and mechanical properties of samples sintered at 1200°C for 3 h was investigated. The particle size refinement appeared to be beneficial in accelerating densification process and improving mechanical properties. The density, compressive strength and hardness of anorthite ceramics obtained from non-milled precursor were measured to be 70.5 %TD, 64 MPa and 1.45 GPa, respectively. On the other side the anorthite ceramics obtained from 24-hour-long milled zeolite precursor had density of 83.9 %TD, compressive strength of 101 MPa and hardness of 3.44 GPa.", publisher = "International Institute for the Science of Sintering", journal = "Science of Sintering", title = "Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite", pages = "358-349", number = "3", volume = "54", doi = "10.2298/SOS2203349O" }
Omerašević, M., Baščarević, Z., Vujasin, R., Devečerski, A.,& Bučevac, D.. (2022). Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite. in Science of Sintering International Institute for the Science of Sintering., 54(3), 349-358. https://doi.org/10.2298/SOS2203349O
Omerašević M, Baščarević Z, Vujasin R, Devečerski A, Bučevac D. Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite. in Science of Sintering. 2022;54(3):349-358. doi:10.2298/SOS2203349O .
Omerašević, Mia, Baščarević, Zvezdana, Vujasin, Radojka, Devečerski, Aleksandar, Bučevac, Dušan, "Effect of Milling Time on Mechanical Properties of Anorthite Obtained by Thermal Transformation of Ca-LTA Zeolite" in Science of Sintering, 54, no. 3 (2022):349-358, https://doi.org/10.2298/SOS2203349O . .