Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds)... and a relatively low hysteresis value of 2.8% wasobtained.
Keywords:
iron manganite / humidity sensing / mercury porosimetry / thick films / complex impedance
Source:
Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 2020, 257, 114547-
TY - JOUR
AU - Nikolić, Maria Vesna
AU - Krstić, Jugoslav B.
AU - Labus, Nebojša J.
AU - Luković, Miloljub
AU - Dojčinović, Milena
AU - Radovanović, Milan
AU - Tadić, Nenad B.
PY - 2020
UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/1552
AB - Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.
PB - Elsevier
T2 - Materials Science and Engineering B: Solid-State Materials for Advanced Technology
T1 - Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing
SP - 114547
VL - 257
DO - 10.1016/j.mseb.2020.114547
ER -
@article{
author = "Nikolić, Maria Vesna and Krstić, Jugoslav B. and Labus, Nebojša J. and Luković, Miloljub and Dojčinović, Milena and Radovanović, Milan and Tadić, Nenad B.",
year = "2020",
abstract = "Iron manganite (FeMnO3) powder with a cubic (bixbyite,−Ia3) crystal structure was obtained by a solid statereaction. Thick film paste (powder+organic vehicles) was screen printed on alumina substrate with test interdigitatedPdAg electrodes. Significant porosity (60.6%) composed of macropores (larger than 100 nm) wasdetermined by Hg porosimetry, changing only slightly from the first extrusion run indicating a stable poresystem. Hg porosimetry evaluation of thick film samples enabled estimation of true textural parameters of thethick film compared to powder. Impedance response of the thick film sensor was monitored in a humiditychamber in the relative humidity (RH) range 30–90%, at room temperature (25 °C) and frequency range from42 Hz to 1 MHz. At 100 Hz the impedance reduced from 10.41 MΩ for RH 30% to 0.68 MΩ for RH 90%. Analysisof complex impedance using an equivalent circuit showed the dominant influence of grain boundaries. Thesensor response and recovery was fast (several seconds) and a relatively low hysteresis value of 2.8% wasobtained.",
publisher = "Elsevier",
journal = "Materials Science and Engineering B: Solid-State Materials for Advanced Technology",
title = "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing",
pages = "114547",
volume = "257",
doi = "10.1016/j.mseb.2020.114547"
}
Nikolić, M. V., Krstić, J. B., Labus, N. J., Luković, M., Dojčinović, M., Radovanović, M.,& Tadić, N. B.. (2020). Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology
Elsevier., 257, 114547.
https://doi.org/10.1016/j.mseb.2020.114547
Nikolić MV, Krstić JB, Labus NJ, Luković M, Dojčinović M, Radovanović M, Tadić NB. Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing. in Materials Science and Engineering B: Solid-State Materials for Advanced Technology. 2020;257:114547.
doi:10.1016/j.mseb.2020.114547 .
Nikolić, Maria Vesna, Krstić, Jugoslav B., Labus, Nebojša J., Luković, Miloljub, Dojčinović, Milena, Radovanović, Milan, Tadić, Nenad B., "Structural, morphological and textural properties of iron manganite (FeMnO3) thick films applied for humidity sensing" in Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 257 (2020):114547,
https://doi.org/10.1016/j.mseb.2020.114547 . .
