Prikaz osnovnih podataka o dokumentu

dc.creatorBlaz, Nelu V.
dc.creatorŽivanov, Ljiljana D
dc.creatorKisić, M.G.
dc.creatorMenicanin, Aleksandar
dc.date.accessioned2022-04-05T15:40:02Z
dc.date.available2022-04-05T15:40:02Z
dc.date.issued2022
dc.identifier.issn1388-2481
dc.identifier.urihttp://rimsi.imsi.bg.ac.rs/handle/123456789/1520
dc.description.abstractThis paper presents a novel approach in the fabrication of rolled capacitors using a printable conductive ABS composite filament. On the contrary to conventional manufacturing of rolled capacitors, here a fused filament fabrication (FFF) technology, which allows a simpler and cheaper procedure of production is used. Also, a simple model of a 3D printed rolled capacitor is developed and the capacitance of the fabricated capacitor is calculated. The capacitance of the fabricated capacitor is measured in the frequency range from 100 Hz to 100 kHz. The measured capacitance is in good agreement with the calculated capacitance. It confirms the possibility of using conductive ABS composite filament for fabrication of 3D printed electrodes which could be formed passive device such as rolled capacitor or sensor for measuring liquid level.en
dc.publisherElsevier Inc.
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceElectrochemistry Communications
dc.subjectFused filament fabrication technologyen
dc.subjectConductive ABS composite filamenten
dc.subject3D printed rolled capacitoren
dc.titleFully 3D printed rolled capacitor based on conductive ABS composite electrodesen
dc.typearticle
dc.rights.licenseBY-NC-ND
dc.citation.other134: -
dc.citation.rankM22~
dc.citation.volume134
dc.identifier.doi10.1016/j.elecom.2021.107178
dc.identifier.fulltexthttp://rimsi.imsi.bg.ac.rs/bitstream/id/431/1517.pdf
dc.identifier.scopus2-s2.0-85120712558
dc.type.versionpublishedVersion


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu