Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc
Само за регистроване кориснике
2019
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.
Кључне речи:
spiral inductor / ferrite inductor / 3D printingИзвор:
EUROCON 2019 - 18th International Conference on Smart Technologies, 2019Издавач:
- Institute of Electrical and Electronics Engineers Inc.
Финансирање / пројекти:
- Иновативне електронске компоненте и системи базирани на неорганским и органским технологијама уграђени у робе и производе широке потрошње (RS-MESTD-Technological Development (TD or TR)-32016)
- 0-3D наноструктуре за примену у електроници и обновљивим изворима енергије: синтеза, карактеризација и процесирање (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45007)
DOI: 10.1109/EUROCON.2019.8861829
ISBN: 978-153869301-8
WoS: 000556109600072
Scopus: 2-s2.0-85074214294
Институција/група
Institut za multidisciplinarna istraživanjaTY - CONF AU - Menicanin, Aleksandar AU - Luković, Miloljub AU - Blaz, Nelu V. AU - Movrin, D. AU - Živanov, Ljiljana D PY - 2019 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/1269 AB - In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor. PB - Institute of Electrical and Electronics Engineers Inc. C3 - EUROCON 2019 - 18th International Conference on Smart Technologies T1 - Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc DO - 10.1109/EUROCON.2019.8861829 ER -
@conference{ author = "Menicanin, Aleksandar and Luković, Miloljub and Blaz, Nelu V. and Movrin, D. and Živanov, Ljiljana D", year = "2019", abstract = "In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.", publisher = "Institute of Electrical and Electronics Engineers Inc.", journal = "EUROCON 2019 - 18th International Conference on Smart Technologies", title = "Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc", doi = "10.1109/EUROCON.2019.8861829" }
Menicanin, A., Luković, M., Blaz, N. V., Movrin, D.,& Živanov, L. D.. (2019). Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc. in EUROCON 2019 - 18th International Conference on Smart Technologies Institute of Electrical and Electronics Engineers Inc... https://doi.org/10.1109/EUROCON.2019.8861829
Menicanin A, Luković M, Blaz NV, Movrin D, Živanov LD. Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc. in EUROCON 2019 - 18th International Conference on Smart Technologies. 2019;. doi:10.1109/EUROCON.2019.8861829 .
Menicanin, Aleksandar, Luković, Miloljub, Blaz, Nelu V., Movrin, D., Živanov, Ljiljana D, "Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc" in EUROCON 2019 - 18th International Conference on Smart Technologies (2019), https://doi.org/10.1109/EUROCON.2019.8861829 . .