In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.
Keywords:
spiral inductor / ferrite inductor / 3D printing
Source:
EUROCON 2019 - 18th International Conference on Smart Technologies, 2019
Publisher:
Institute of Electrical and Electronics Engineers Inc.
TY - CONF
AU - Menićanin, Aleksandar
AU - Luković, Miloljub
AU - Blaz, Nelu V.
AU - Movrin, D.
AU - Živanov, Ljiljana D
PY - 2019
UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/1269
AB - In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.
PB - Institute of Electrical and Electronics Engineers Inc.
C3 - EUROCON 2019 - 18th International Conference on Smart Technologies
T1 - Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc
DO - 10.1109/EUROCON.2019.8861829
ER -
@conference{
author = "Menićanin, Aleksandar and Luković, Miloljub and Blaz, Nelu V. and Movrin, D. and Živanov, Ljiljana D",
year = "2019",
abstract = "In this paper, we present spiral inductor fabricated by 3D additive manufacturing (AM) with added ferrite disc in the middle of the inductor (center), first approach, and with added ferrite disc beneath the inductor, second approach. The inductor was made with conductive epoxy silver based paste which was injected in a spiral channel fabricated in polylactic acid (PLA) substrate (model) using AM technology. 3D model and obtained results present a connection between passive components production and additive manufacturing. The designed spiral inductor has four full turns, with inner diameter 10 mm and outer diameter 24 mm The total dimension of the component is 27 mm x 27 mm The prototype results show good characteristics and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
journal = "EUROCON 2019 - 18th International Conference on Smart Technologies",
title = "Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc",
doi = "10.1109/EUROCON.2019.8861829"
}
Menićanin, A., Luković, M., Blaz, N. V., Movrin, D.,& Živanov, L. D.. (2019). Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc. in EUROCON 2019 - 18th International Conference on Smart Technologies
Institute of Electrical and Electronics Engineers Inc...
https://doi.org/10.1109/EUROCON.2019.8861829
Menićanin A, Luković M, Blaz NV, Movrin D, Živanov LD. Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc. in EUROCON 2019 - 18th International Conference on Smart Technologies. 2019;.
doi:10.1109/EUROCON.2019.8861829 .
Menićanin, Aleksandar, Luković, Miloljub, Blaz, Nelu V., Movrin, D., Živanov, Ljiljana D, "Design and Fabrication of Ferrite Inductor Using 3D Printed Spiral Coil and Ferrite Disc" in EUROCON 2019 - 18th International Conference on Smart Technologies (2019),
https://doi.org/10.1109/EUROCON.2019.8861829 . .
