RIMSI - Репозиторијум Института за мултидисциплинарна истраживања
Универзитет у Београду - Института за мултидисциплинарна истраживања
    • English
    • Српски
    • Српски (Serbia)
  • Српски (ћирилица) 
    • Енглески
    • Српски (ћирилица)
    • Српски (латиница)
  • Пријава
Преглед записа 
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • Преглед записа
  •   RIMSI
  • Institut za multidisciplinarna istraživanja
  • Radovi istraživača / Researchers’ publications
  • Преглед записа
JavaScript is disabled for your browser. Some features of this site may not work without it.

Spiral Inductor Fabricated by 3D Additive Manufacturing

Нема приказа
Аутори
Menićanin, Aleksandar
Živanov, Ljiljana D
Movrin, D.
Blaz, Nelu V.
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документу
Апстракт
This paper presents spiral inductor fabricated by 3D additive manufacturing. The inductor was made with conductive epoxy silver based paste which was injected in spiral channel fabricated in polylactide (PLA) substrate (model) using additive manufacturing technology. The fabricated structure has value of effective inductance around 415 nH, maximum quality factor around 12 and outer dimension diameter 24 mm. The prototype results show good characteristics of 3D additive manufactured spiral inductor and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.
Кључне речи:
Substrates / Spiral chan / Quality factors / Passive devices / Manufacture / Innovative approaches / Fabrication / Fabricated structures / Conductive epoxy / Additive manufacturing technology / 3D printers
Извор:
Proceedings of the International Spring Seminar on Electronics Technology, 2017
Издавач:
  • IEEE Computer Society
Финансирање / пројекти:
  • 0-3D наноструктуре за примену у електроници и обновљивим изворима енергије: синтеза, карактеризација и процесирање (RS-45007)
  • Иновативне електронске компоненте и системи базирани на неорганским и органским технологијама уграђени у робе и производе широке потрошње (RS-32016)

DOI: 10.1109/ISSE.2017.8001007

ISBN: 978-153860582-0

ISSN: 2161-2528

WoS: 000426973000130

Scopus: 2-s2.0-85029906895
[ Google Scholar ]
1
URI
http://rimsi.imsi.bg.ac.rs/handle/123456789/1072
Колекције
  • Radovi istraživača / Researchers’ publications
Институција/група
Institut za multidisciplinarna istraživanja
TY  - CONF
AU  - Menićanin, Aleksandar
AU  - Živanov, Ljiljana D
AU  - Movrin, D.
AU  - Blaz, Nelu V.
PY  - 2017
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/1072
AB  - This paper presents spiral inductor fabricated by 3D additive manufacturing. The inductor was made with conductive epoxy silver based paste which was injected in spiral channel fabricated in polylactide (PLA) substrate (model) using additive manufacturing technology. The fabricated structure has value of effective inductance around 415 nH, maximum quality factor around 12 and outer dimension diameter 24 mm. The prototype results show good characteristics of 3D additive manufactured spiral inductor and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.
PB  - IEEE Computer Society
C3  - Proceedings of the International Spring Seminar on Electronics Technology
T1  - Spiral Inductor Fabricated by 3D Additive Manufacturing
DO  - 10.1109/ISSE.2017.8001007
ER  - 
@conference{
author = "Menićanin, Aleksandar and Živanov, Ljiljana D and Movrin, D. and Blaz, Nelu V.",
year = "2017",
abstract = "This paper presents spiral inductor fabricated by 3D additive manufacturing. The inductor was made with conductive epoxy silver based paste which was injected in spiral channel fabricated in polylactide (PLA) substrate (model) using additive manufacturing technology. The fabricated structure has value of effective inductance around 415 nH, maximum quality factor around 12 and outer dimension diameter 24 mm. The prototype results show good characteristics of 3D additive manufactured spiral inductor and demonstrate an innovative approach to fabricate low-cost, passive devices such as an inductor.",
publisher = "IEEE Computer Society",
journal = "Proceedings of the International Spring Seminar on Electronics Technology",
title = "Spiral Inductor Fabricated by 3D Additive Manufacturing",
doi = "10.1109/ISSE.2017.8001007"
}
Menićanin, A., Živanov, L. D., Movrin, D.,& Blaz, N. V.. (2017). Spiral Inductor Fabricated by 3D Additive Manufacturing. in Proceedings of the International Spring Seminar on Electronics Technology
IEEE Computer Society..
https://doi.org/10.1109/ISSE.2017.8001007
Menićanin A, Živanov LD, Movrin D, Blaz NV. Spiral Inductor Fabricated by 3D Additive Manufacturing. in Proceedings of the International Spring Seminar on Electronics Technology. 2017;.
doi:10.1109/ISSE.2017.8001007 .
Menićanin, Aleksandar, Živanov, Ljiljana D, Movrin, D., Blaz, Nelu V., "Spiral Inductor Fabricated by 3D Additive Manufacturing" in Proceedings of the International Spring Seminar on Electronics Technology (2017),
https://doi.org/10.1109/ISSE.2017.8001007 . .

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму RIMSI | Пошаљите запажања

OpenAIRERCUB
 

 

Комплетан репозиторијумГрупеАуториНасловиТемеОва институцијаАуториНасловиТеме

Статистика

Преглед статистика

DSpace software copyright © 2002-2015  DuraSpace
О репозиторијуму RIMSI | Пошаљите запажања

OpenAIRERCUB