Претраживање
Приказ резултата 1-4 од 4
COMPARISON OF SENSING PROPERTIES OF SnO2/KIT-5 AND SnO2 HUMIDITY SENSORS
(Institute for Multidisciplinary Research, University of Belgrade, 2019)
In this work, two different syntheses approaches – nanocasting and sol-gel
technique were employed for the preparation of SnO2 powders for humidity sensors.
Stock solution of SnCl2 in ethanol (0.5 M) was used as a ...
THE EFFECTS OF MILLING MEDIA ON MORPHOLOGICAL AND STRUCTURAL CHANGES IN MECHANICALLY ACTIVATED ZnO
(Institute for Multidisciplinary Research, University of Belgrade, 2019)
Mechanical activation (MA), as a simple and low-cost method for modifying
physico-chemical properties of disperse systems, is often used for obtaining
powders. Prolonged milling in high-energy mills, necessary for ...
Humidity sensor based on mesoporous SnO2 fabricated via nanocasting technique
(Institute for Multidisciplinary Research, University of Belgrade, 2019)
In this contribution, the mesoporous SnO2 was fabricated via nanocasting,
where the hydrothermally processed silica KIT-5 with a high specific surface area of
610 m2/g and pore volume of 0.72 cm3/g was used as a hard ...
SBA-15 ASSISTED SnO2 HUMIDITY SENSOR
(Institute for Multidisciplinary Research, University of Belgrade, 2019)
Over the past decade, the interest for fabrication of mesoporous metal oxides
has been increased, and that draw attention globally on fabrication and designing
efficient humidity sensors based on these materials. Their ...