Претраживање
Приказ резултата 11-20 од 107
Morphology and composition of Ni-Co electrodeposited powders
(Elsevier Science Inc, New York, 2011)
The morphology, phase and chemical composition of Ni-Co alloy powders electrodeposited from an ammonium sulfate-boric acid containing electrolyte with different ratio of Ni/Co ions were investigated. The ratios of NVCo ...
Anisotropy of cell wall polymers in branches of hardwood and softwood: a polarized FTIR study
(Springer, Dordrecht, 2011)
The mechanical and physical properties of wood fibres are dependent on the organisation of their constituent polymers (cellulose, hemicellulose and lignin). Fourier Transform Infrared (FTIR) microscopy was used to examine ...
Preparation of ultrathin PZT films by a chemical solution deposition method from a polymeric citrate precursor
(Elsevier Sci Ltd, Oxford, 2010)
Ultrathin PZT film was prepared using a chemical solution deposition method from polymeric citrate precursors. The PZT solution was spin-coated on an amorphous silica layer formed on a Si(l 0 0) substrate. The films were ...
Electrical properties of lanthanum doped barium titanate ceramics
(Elsevier Science Inc, New York, 2011)
Pure and lanthanum doped barium titanate (BT) ceramics were prepared by sintering pellets at 1300 degrees C for 8 h, obtained from nanopowders synthesized by the polymeric precursor method. XRD results showed formation of ...
Determination of the sources of nitrate and the microbiological sources of pollution in the Sava River Basin
(Elsevier, Amsterdam, 2016)
Coupled measurements of nitrate (NO3-), nitrogen (N), and oxygen (O) isotopic composition (delta N-15(NO3) and delta O-18(NO3)) were used to investigate the sources and processes of N cycling, while the microbial source ...
Structural, ferroelectric and magnetic properties of BiFeO3 synthesized by sonochemically assisted hydrothermal and hydro-evaporation chemical methods
(Elsevier Sci Ltd, Oxford, 2016)
BiFeO3 powders were synthesized by sonochemically assisted hydrothermal and hydro-evaporation methods. The X-ray diffraction confirmed the presence of secondary phases, Bi25FeO39 and Bi2Fe4O9, in as prepared BiFeO3 powders. ...
Dielectric and relaxor behavior of BaBi4Ti4O15 ceramics
(Elsevier Science Sa, Lausanne, 2010)
Barium bismuth titanate BaBi4Ti4O15 (BBiT) ceramics have been prepared using non-conventional solid-state reaction route based on mechanochemical synthesis during intensive milling. The X-ray diffraction method was used ...
Electrochemical oxidation of ethanol on palladium-nickel nanocatalyst in alkaline media
(Elsevier, Amsterdam, 2016)
Pd-Ni/C catalyst was synthesized employing a borohydride reduction method. The high area Ni was first dispersed on the carbon support and then modified by Pd nanoparticles. Transmission electron microscopy confirmed ...
The influence of Pb addition on the properties of fly ash-based geopolymers
(Elsevier B.V., 2018)
Preventing or reducing negative effects on the environment from the waste landfilling is the main goal defined by the European Landfill Directive. Generally geopolymers can be considered as sustainable binders for ...
The characterization of the barium titanate ceramic powders prepared by the Pechini type reaction route and mechanically assisted synthesis
(Elsevier Sci Ltd, Oxford, 2010)
BaTiO3 ceramic powders were prepared by a complex method based on the Pechini type reaction route and mechanically assisted synthesis. In both ways BaTiO3 ceramics were sintered after 120 min on 1300 degrees C without ...