TY  - JOUR
AU  - Savić, Aleksandar G
AU  - Mitrović, Aleksandra Lj.
AU  - Donaldson, Lloyd
AU  - Simonović Radosavljević, Jasna
AU  - Bogdanović Pristov, Jelena
AU  - Steinbach, Gabor
AU  - Garab, Gyozo
AU  - Radotić, Ksenija
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/989
AB  - Fluorescence-detected linear dichroism (FDLD) microscopy provides observation of structural order in a microscopic sample and its expression in numerical terms, enabling both quantitative and qualitative comparison among different samples. We applied FDLD microscopy to compare the distribution and alignment of cellulose fibrils in cell walls of compression wood (CW) and normal wood (NW) on stem cross-sections of juvenile Picea omorika trees. Our data indicate a decrease in cellulose fibril order in CW compared with NW. Radial and tangential walls differ considerably in both NW and CW. In radial walls, cellulose fibril order shows a gradual decrease from NW to severe CW, in line with the increase in CW severity. This indicates that FDLD analysis of cellulose fibril order in radial cell walls is a valuable method for estimation of CW severity.
PB  - Cambridge Univ Press, New York
T2  - Microscopy and Microanalysis
T1  - Fluorescence-Detected Linear Dichroism of Wood Cell Walls in Juvenile Serbian Spruce: Estimation of Compression Wood Severity
EP  - 367
IS  - 2
SP  - 361
VL  - 22
DO  - 10.1017/S143192761600009X
ER  - 

@article{
author = "Savić, Aleksandar G and Mitrović, Aleksandra Lj. and Donaldson, Lloyd and Simonović Radosavljević, Jasna and Bogdanović Pristov, Jelena and Steinbach, Gabor and Garab, Gyozo and Radotić, Ksenija",
year = "2016",
abstract = "Fluorescence-detected linear dichroism (FDLD) microscopy provides observation of structural order in a microscopic sample and its expression in numerical terms, enabling both quantitative and qualitative comparison among different samples. We applied FDLD microscopy to compare the distribution and alignment of cellulose fibrils in cell walls of compression wood (CW) and normal wood (NW) on stem cross-sections of juvenile Picea omorika trees. Our data indicate a decrease in cellulose fibril order in CW compared with NW. Radial and tangential walls differ considerably in both NW and CW. In radial walls, cellulose fibril order shows a gradual decrease from NW to severe CW, in line with the increase in CW severity. This indicates that FDLD analysis of cellulose fibril order in radial cell walls is a valuable method for estimation of CW severity.",
publisher = "Cambridge Univ Press, New York",
journal = "Microscopy and Microanalysis",
title = "Fluorescence-Detected Linear Dichroism of Wood Cell Walls in Juvenile Serbian Spruce: Estimation of Compression Wood Severity",
pages = "367-361",
number = "2",
volume = "22",
doi = "10.1017/S143192761600009X"
}

Savić, A. G., Mitrović, A. Lj., Donaldson, L., Simonović Radosavljević, J., Bogdanović Pristov, J., Steinbach, G., Garab, G.,& Radotić, K.. (2016). Fluorescence-Detected Linear Dichroism of Wood Cell Walls in Juvenile Serbian Spruce: Estimation of Compression Wood Severity. in Microscopy and Microanalysis
Cambridge Univ Press, New York., 22(2), 361-367.
https://doi.org/10.1017/S143192761600009X

Savić AG, Mitrović AL, Donaldson L, Simonović Radosavljević J, Bogdanović Pristov J, Steinbach G, Garab G, Radotić K. Fluorescence-Detected Linear Dichroism of Wood Cell Walls in Juvenile Serbian Spruce: Estimation of Compression Wood Severity. in Microscopy and Microanalysis. 2016;22(2):361-367.
doi:10.1017/S143192761600009X .

Savić, Aleksandar G, Mitrović, Aleksandra Lj., Donaldson, Lloyd, Simonović Radosavljević, Jasna, Bogdanović Pristov, Jelena, Steinbach, Gabor, Garab, Gyozo, Radotić, Ksenija, "Fluorescence-Detected Linear Dichroism of Wood Cell Walls in Juvenile Serbian Spruce: Estimation of Compression Wood Severity" in Microscopy and Microanalysis, 22, no. 2 (2016):361-367,
https://doi.org/10.1017/S143192761600009X . .

TY  - JOUR
AU  - Branković, Zorica
AU  - Luković Golić, Danijela
AU  - Radojković, Aleksandar
AU  - Ćirković, Jovana
AU  - Pajić, Damir
AU  - Marinković Stanojević, Zorica
AU  - Xing, Junwei
AU  - Radović, Miladin
AU  - Li, Guorong
AU  - Branković, Goran
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/964
AB  - Bismuth ferrite, BiFeO3 (BFO), powder was synthesized by hydrothermal method from Bi(NO3)(3)center dot 5H(2)O and Fe(NO3)(3)center dot 9H(2)O as precursors. The synthesized powder was further sintered using spark plasma sintering (SPS). The sintering conditions were optimized in order to achieve high density, minimal amount of secondary phases and improved ferroelectric andmagnetic properties. The optimal structure and properties were achieved after spark plasma sintering at 630 degrees C for 20min, under uniaxial pressure of 90MPa. The composition, microstructure, ferroelectric and magnetic properties of the SPS samples were characterized and compared to those of conventionally sintered ceramics obtained from the same powder. Although the samples sintered using conventional method showed slightly lower amount of secondary phases, the spark plasma sintered samples exhibited favourable microstructure and better ferroelectric properties.
PB  - Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad
T2  - Processing and Application of Ceramics
T1  - Spark plasma sintering of hydrothermally synthesized bismuth ferrite
EP  - 264
IS  - 4
SP  - 257
VL  - 10
DO  - 10.2298/PAC1604257B
ER  - 

@article{
author = "Branković, Zorica and Luković Golić, Danijela and Radojković, Aleksandar and Ćirković, Jovana and Pajić, Damir and Marinković Stanojević, Zorica and Xing, Junwei and Radović, Miladin and Li, Guorong and Branković, Goran",
year = "2016",
abstract = "Bismuth ferrite, BiFeO3 (BFO), powder was synthesized by hydrothermal method from Bi(NO3)(3)center dot 5H(2)O and Fe(NO3)(3)center dot 9H(2)O as precursors. The synthesized powder was further sintered using spark plasma sintering (SPS). The sintering conditions were optimized in order to achieve high density, minimal amount of secondary phases and improved ferroelectric andmagnetic properties. The optimal structure and properties were achieved after spark plasma sintering at 630 degrees C for 20min, under uniaxial pressure of 90MPa. The composition, microstructure, ferroelectric and magnetic properties of the SPS samples were characterized and compared to those of conventionally sintered ceramics obtained from the same powder. Although the samples sintered using conventional method showed slightly lower amount of secondary phases, the spark plasma sintered samples exhibited favourable microstructure and better ferroelectric properties.",
publisher = "Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad",
journal = "Processing and Application of Ceramics",
title = "Spark plasma sintering of hydrothermally synthesized bismuth ferrite",
pages = "264-257",
number = "4",
volume = "10",
doi = "10.2298/PAC1604257B"
}

Branković, Z., Luković Golić, D., Radojković, A., Ćirković, J., Pajić, D., Marinković Stanojević, Z., Xing, J., Radović, M., Li, G.,& Branković, G.. (2016). Spark plasma sintering of hydrothermally synthesized bismuth ferrite. in Processing and Application of Ceramics
Univerzitet u Novom Sadu - Tehnološki fakultet, Novi Sad., 10(4), 257-264.
https://doi.org/10.2298/PAC1604257B

Branković Z, Luković Golić D, Radojković A, Ćirković J, Pajić D, Marinković Stanojević Z, Xing J, Radović M, Li G, Branković G. Spark plasma sintering of hydrothermally synthesized bismuth ferrite. in Processing and Application of Ceramics. 2016;10(4):257-264.
doi:10.2298/PAC1604257B .

Branković, Zorica, Luković Golić, Danijela, Radojković, Aleksandar, Ćirković, Jovana, Pajić, Damir, Marinković Stanojević, Zorica, Xing, Junwei, Radović, Miladin, Li, Guorong, Branković, Goran, "Spark plasma sintering of hydrothermally synthesized bismuth ferrite" in Processing and Application of Ceramics, 10, no. 4 (2016):257-264,
https://doi.org/10.2298/PAC1604257B . .