TY  - CONF
AU  - Ivetić, Tamara B.
AU  - Nikolić, Maria Vesna
AU  - Paraskevopoulos, K.M.
AU  - Blagojević, V.
AU  - Nikolić, Pantelija M.
AU  - Ristić, M.M.
PY  - 2008
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/275
AB  - ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material.
C3  - A Global Road Map for Ceramic Materials and Technologies: Forecasting the Future of Ceramics, Intern
T1  - A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics
SP  - 6
UR  - https://hdl.handle.net/21.15107/rcub_dais_3565
ER  - 

@conference{
author = "Ivetić, Tamara B. and Nikolić, Maria Vesna and Paraskevopoulos, K.M. and Blagojević, V. and Nikolić, Pantelija M. and Ristić, M.M.",
year = "2008",
abstract = "ZnO-SnO2 ceramics were prepared with a traditional powder mixed oxide route by mixing starting powders of ZnO and SnO2 in the molar ratio 2:1 and adding small amounts (0.5; 1.0; and 1.5 molar%) of Bi 2O3. These mixtures were then mechanically activated for 10 minutes in a planetary ball mill, uniaxially pressed and sintered at 1300°C for 2h. The phase composition of the sintered samples was determined with X-ray Diffraction (XRD) analysis and a detailed Rietveld analysis was performed. Room temperature far infrared reflectivity diagrams were obtained using Bruker 113V FTIR spectrometer and fitted with several theoretical models in other to determine parameter values for some structural and optical properties of the obtained material.",
journal = "A Global Road Map for Ceramic Materials and Technologies: Forecasting the Future of Ceramics, Intern",
title = "A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics",
pages = "6",
url = "https://hdl.handle.net/21.15107/rcub_dais_3565"
}

Ivetić, T. B., Nikolić, M. V., Paraskevopoulos, K.M., Blagojević, V., Nikolić, P. M.,& Ristić, M.M.. (2008). A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics. in A Global Road Map for Ceramic Materials and Technologies: Forecasting the Future of Ceramics, Intern, 6.
https://hdl.handle.net/21.15107/rcub_dais_3565

Ivetić TB, Nikolić MV, Paraskevopoulos K, Blagojević V, Nikolić PM, Ristić M. A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics. in A Global Road Map for Ceramic Materials and Technologies: Forecasting the Future of Ceramics, Intern. 2008;:6.
https://hdl.handle.net/21.15107/rcub_dais_3565 .

Ivetić, Tamara B., Nikolić, Maria Vesna, Paraskevopoulos, K.M., Blagojević, V., Nikolić, Pantelija M., Ristić, M.M., "A detailed XRD and FTIR analysis of Bi2O3 doped ZnO-SnO2 ceramics" in A Global Road Map for Ceramic Materials and Technologies: Forecasting the Future of Ceramics, Intern (2008):6,
https://hdl.handle.net/21.15107/rcub_dais_3565 .

TY  - JOUR
AU  - Nikolić, Maria Vesna
AU  - Nikolić, Pantelija M.
AU  - Blagojević, V.
AU  - Paraskevopoulos, K.M.
AU  - Zorba, T.T.
AU  - Vasiljević-Radović, Dana
AU  - Ristić, M.M.
PY  - 2006
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/159
AB  - Far-infrared reflection spectra of sintered α-MnSe were measured at room temperature. The measured spectrum had one pronounced peak in accordance with literature data and group theory estimation and one smaller peak resulting from the applied sintering procedure. The measured reflection spectrum was analyzed using Kramers - Kronig analysis and a three-component effective medium model based on Bruggeman's theory assuming the presence of a small amount of pores, dominant crystalline grains and intergranular material. In the model the crystalline grains were modeled as a single oscillator appropriate to the single crystal and the intergranular material was also defined as a single ionic oscillator.
PB  - Carl Hanser Verlag
T2  - Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques
T1  - Infrared properties of sintered α-MnSe
EP  - 669
IS  - 5
SP  - 666
VL  - 97
DO  - 10.3139/146.101288
ER  - 

@article{
author = "Nikolić, Maria Vesna and Nikolić, Pantelija M. and Blagojević, V. and Paraskevopoulos, K.M. and Zorba, T.T. and Vasiljević-Radović, Dana and Ristić, M.M.",
year = "2006",
abstract = "Far-infrared reflection spectra of sintered α-MnSe were measured at room temperature. The measured spectrum had one pronounced peak in accordance with literature data and group theory estimation and one smaller peak resulting from the applied sintering procedure. The measured reflection spectrum was analyzed using Kramers - Kronig analysis and a three-component effective medium model based on Bruggeman's theory assuming the presence of a small amount of pores, dominant crystalline grains and intergranular material. In the model the crystalline grains were modeled as a single oscillator appropriate to the single crystal and the intergranular material was also defined as a single ionic oscillator.",
publisher = "Carl Hanser Verlag",
journal = "Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques",
title = "Infrared properties of sintered α-MnSe",
pages = "669-666",
number = "5",
volume = "97",
doi = "10.3139/146.101288"
}

Nikolić, M. V., Nikolić, P. M., Blagojević, V., Paraskevopoulos, K.M., Zorba, T.T., Vasiljević-Radović, D.,& Ristić, M.M.. (2006). Infrared properties of sintered α-MnSe. in Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques
Carl Hanser Verlag., 97(5), 666-669.
https://doi.org/10.3139/146.101288

Nikolić MV, Nikolić PM, Blagojević V, Paraskevopoulos K, Zorba T, Vasiljević-Radović D, Ristić M. Infrared properties of sintered α-MnSe. in Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques. 2006;97(5):666-669.
doi:10.3139/146.101288 .

Nikolić, Maria Vesna, Nikolić, Pantelija M., Blagojević, V., Paraskevopoulos, K.M., Zorba, T.T., Vasiljević-Radović, Dana, Ristić, M.M., "Infrared properties of sintered α-MnSe" in Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 97, no. 5 (2006):666-669,
https://doi.org/10.3139/146.101288 . .

TY  - JOUR
AU  - Nikolić, Pantelija M.
AU  - Durić, S.
AU  - Radulović, K.
AU  - Vasiljević-Radović, Dana
AU  - Nikolić, Maria Vesna
AU  - Ristić, M.M.
PY  - 2002
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/77
AB  - The possibility of characterization of aluminium powders using a horizontal coherer has been considered. Al powders of known dimension were treated with a high frequency electromagnetic field or with a DC electric field, which were increased until a dielectric breakdown occurred. Using a multifunctional card PC-428 Electronic Design and a suitable interface between the coherer and PC, the activation time of the coherer was measured as a function of powder dimension and the distance between the coherer electrodes. It was also shown that the average dimension of powders of unknown size could be determined using the coherer.
PB  - Međunarodni Institut za nauku o sinterovanju, Beograd
T2  - Science of Sintering
T1  - Characterisation of dispersive systems using a coherer
EP  - 108
IS  - 1
SP  - 101
VL  - 34
DO  - 10.2298/SOS0201101N
ER  - 

@article{
author = "Nikolić, Pantelija M. and Durić, S. and Radulović, K. and Vasiljević-Radović, Dana and Nikolić, Maria Vesna and Ristić, M.M.",
year = "2002",
abstract = "The possibility of characterization of aluminium powders using a horizontal coherer has been considered. Al powders of known dimension were treated with a high frequency electromagnetic field or with a DC electric field, which were increased until a dielectric breakdown occurred. Using a multifunctional card PC-428 Electronic Design and a suitable interface between the coherer and PC, the activation time of the coherer was measured as a function of powder dimension and the distance between the coherer electrodes. It was also shown that the average dimension of powders of unknown size could be determined using the coherer.",
publisher = "Međunarodni Institut za nauku o sinterovanju, Beograd",
journal = "Science of Sintering",
title = "Characterisation of dispersive systems using a coherer",
pages = "108-101",
number = "1",
volume = "34",
doi = "10.2298/SOS0201101N"
}

Nikolić, P. M., Durić, S., Radulović, K., Vasiljević-Radović, D., Nikolić, M. V.,& Ristić, M.M.. (2002). Characterisation of dispersive systems using a coherer. in Science of Sintering
Međunarodni Institut za nauku o sinterovanju, Beograd., 34(1), 101-108.
https://doi.org/10.2298/SOS0201101N

Nikolić PM, Durić S, Radulović K, Vasiljević-Radović D, Nikolić MV, Ristić M. Characterisation of dispersive systems using a coherer. in Science of Sintering. 2002;34(1):101-108.
doi:10.2298/SOS0201101N .

Nikolić, Pantelija M., Durić, S., Radulović, K., Vasiljević-Radović, Dana, Nikolić, Maria Vesna, Ristić, M.M., "Characterisation of dispersive systems using a coherer" in Science of Sintering, 34, no. 1 (2002):101-108,
https://doi.org/10.2298/SOS0201101N . .