TY  - CONF
AU  - Žlebič, Č.
AU  - Živanov, Ljiljana D
AU  - Kisić, M.
AU  - Blaz, Nelu V.
AU  - Menicanin, Aleksandar
AU  - Randjelović, Danijela V
AU  - Damnjanović, M.
PY  - 2015
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/923
AB  - In this paper, electrical properties of inkjet printed graphene patterns on a PET-based (Novele (TM) IJ-220) substrate are presented. Water-soluble graphene conductive ink (Phene plus I3015) was used. Tested samples were printed with up to 12 layers. Desktop inkjet printer with 2000 dpi resolution was used for printing. After that, structures were sintered at 100 degrees C for 30 minutes. Printed patterns surface topography and profiles were observed using atomic force microscope (AFM) NTEGRA prima (NT-MDT). According to the results of AFM characterization, the thickness of 12 printed layers is similar to 750 nm. Measurements of electrical properties were performed with Hall effect measurement system at 0.37 T. Carrier mobility is 2330 cm(2)/Vs, while the conductivity is 389.11 1/Omega cm. All patterns are printed successfully with uniform structure and they are showing excellent compatibility with flexible PET-based substrate.
PB  - IEEE Computer Society
C3  - Proceedings of the International Spring Seminar on Electronics Technology
T1  - Electrical Properties of Inkjet Printed Graphene Patterns on PET-Based Substrate
EP  - 417
SP  - 414
VL  - 2015-September
DO  - 10.1109/ISSE.2015.7248032
ER  - 

@conference{
author = "Žlebič, Č. and Živanov, Ljiljana D and Kisić, M. and Blaz, Nelu V. and Menicanin, Aleksandar and Randjelović, Danijela V and Damnjanović, M.",
year = "2015",
abstract = "In this paper, electrical properties of inkjet printed graphene patterns on a PET-based (Novele (TM) IJ-220) substrate are presented. Water-soluble graphene conductive ink (Phene plus I3015) was used. Tested samples were printed with up to 12 layers. Desktop inkjet printer with 2000 dpi resolution was used for printing. After that, structures were sintered at 100 degrees C for 30 minutes. Printed patterns surface topography and profiles were observed using atomic force microscope (AFM) NTEGRA prima (NT-MDT). According to the results of AFM characterization, the thickness of 12 printed layers is similar to 750 nm. Measurements of electrical properties were performed with Hall effect measurement system at 0.37 T. Carrier mobility is 2330 cm(2)/Vs, while the conductivity is 389.11 1/Omega cm. All patterns are printed successfully with uniform structure and they are showing excellent compatibility with flexible PET-based substrate.",
publisher = "IEEE Computer Society",
journal = "Proceedings of the International Spring Seminar on Electronics Technology",
title = "Electrical Properties of Inkjet Printed Graphene Patterns on PET-Based Substrate",
pages = "417-414",
volume = "2015-September",
doi = "10.1109/ISSE.2015.7248032"
}

Žlebič, Č., Živanov, L. D., Kisić, M., Blaz, N. V., Menicanin, A., Randjelović, D. V.,& Damnjanović, M.. (2015). Electrical Properties of Inkjet Printed Graphene Patterns on PET-Based Substrate. in Proceedings of the International Spring Seminar on Electronics Technology
IEEE Computer Society., 2015-September, 414-417.
https://doi.org/10.1109/ISSE.2015.7248032

Žlebič Č, Živanov LD, Kisić M, Blaz NV, Menicanin A, Randjelović DV, Damnjanović M. Electrical Properties of Inkjet Printed Graphene Patterns on PET-Based Substrate. in Proceedings of the International Spring Seminar on Electronics Technology. 2015;2015-September:414-417.
doi:10.1109/ISSE.2015.7248032 .

Žlebič, Č., Živanov, Ljiljana D, Kisić, M., Blaz, Nelu V., Menicanin, Aleksandar, Randjelović, Danijela V, Damnjanović, M., "Electrical Properties of Inkjet Printed Graphene Patterns on PET-Based Substrate" in Proceedings of the International Spring Seminar on Electronics Technology, 2015-September (2015):414-417,
https://doi.org/10.1109/ISSE.2015.7248032 . .

TY  - JOUR
AU  - Menicanin, Aleksandar
AU  - Ivanisević, Nikola P.
AU  - Živanov, Ljiljana D
AU  - Damnjanović, Mirjana S.
AU  - Marić, Andrea M
AU  - Randjelović, Danijela V
PY  - 2014
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/802
AB  - In this paper, we present the modeling, fabrication, measurement techniques, and characterization results of multilayer miniature coplanar waveguide (CPW) meander-type inductors for high-frequency applications. Detailed procedure of the fabrication process based on using ink-jet printing technology is given. Silver nanoparticle ink that contains 20 wt% of silver was printed on a flexible polyimide foil 50 mu m thick in one, two, and three layers. It is shown that multilayer CPW inductors have improved performance. Almost two times better Q-factor value was achieved. This is an encouraging result for multilayer printing in ink-jet technology.
PB  - IEEE-Inst Electrical Electronics Engineers Inc, Piscataway
T2  - IEEE Transactions on Magnetics
T1  - Improved Performance of Multilayer CPW Inductors on Flexible Substrate
IS  - 11
VL  - 50
DO  - 10.1109/TMAG.2014.2329720
ER  - 

@article{
author = "Menicanin, Aleksandar and Ivanisević, Nikola P. and Živanov, Ljiljana D and Damnjanović, Mirjana S. and Marić, Andrea M and Randjelović, Danijela V",
year = "2014",
abstract = "In this paper, we present the modeling, fabrication, measurement techniques, and characterization results of multilayer miniature coplanar waveguide (CPW) meander-type inductors for high-frequency applications. Detailed procedure of the fabrication process based on using ink-jet printing technology is given. Silver nanoparticle ink that contains 20 wt% of silver was printed on a flexible polyimide foil 50 mu m thick in one, two, and three layers. It is shown that multilayer CPW inductors have improved performance. Almost two times better Q-factor value was achieved. This is an encouraging result for multilayer printing in ink-jet technology.",
publisher = "IEEE-Inst Electrical Electronics Engineers Inc, Piscataway",
journal = "IEEE Transactions on Magnetics",
title = "Improved Performance of Multilayer CPW Inductors on Flexible Substrate",
number = "11",
volume = "50",
doi = "10.1109/TMAG.2014.2329720"
}

Menicanin, A., Ivanisević, N. P., Živanov, L. D., Damnjanović, M. S., Marić, A. M.,& Randjelović, D. V.. (2014). Improved Performance of Multilayer CPW Inductors on Flexible Substrate. in IEEE Transactions on Magnetics
IEEE-Inst Electrical Electronics Engineers Inc, Piscataway., 50(11).
https://doi.org/10.1109/TMAG.2014.2329720

Menicanin A, Ivanisević NP, Živanov LD, Damnjanović MS, Marić AM, Randjelović DV. Improved Performance of Multilayer CPW Inductors on Flexible Substrate. in IEEE Transactions on Magnetics. 2014;50(11).
doi:10.1109/TMAG.2014.2329720 .

Menicanin, Aleksandar, Ivanisević, Nikola P., Živanov, Ljiljana D, Damnjanović, Mirjana S., Marić, Andrea M, Randjelović, Danijela V, "Improved Performance of Multilayer CPW Inductors on Flexible Substrate" in IEEE Transactions on Magnetics, 50, no. 11 (2014),
https://doi.org/10.1109/TMAG.2014.2329720 . .

TY  - JOUR
AU  - Menicanin, Aleksandar
AU  - Živanov, Ljiljana D
AU  - Stojanović, Goran M
AU  - Samardžić, Nataša M
AU  - Randjelović, Danijela V
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/718
AB  - This brief presents the transport parameters of silver layers on a polyimide substrate fabricated by an inkjet printing technology using nanoparticle inks with 20 wt% and 40 wt% silver. All the electrical characteristics of the samples were measured by Hall effect measurement system at 0.37 T. The electron mobility in inkjet printed silver layer was 7.07 and 4.58 cm(2)/V s for 20 wt% silver, 29.6 and 21.3 cm(2)/V s for 40 wt% silver at 77 and 300 K, respectively. The resistivity in inkjet printed silver layer with 20 wt% is 20.6 x 10(-6) and 27.1 x 10(-6) Omega cm, and 4.81 x 10(-6) and 8.27 x 10(-6) Omega cm for 40 wt% silver at 77 and 300 K, respectively. The surface morphology and profiles of the samples were obtained with an atomic force and scanning electron microscope.
PB  - IEEE-Inst Electrical Electronics Engineers Inc, Piscataway
T2  - IEEE Transactions on Electron Devices
T1  - Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures
EP  - 2967
IS  - 9
SP  - 2963
VL  - 60
DO  - 10.1109/TED.2013.2274661
ER  - 

@article{
author = "Menicanin, Aleksandar and Živanov, Ljiljana D and Stojanović, Goran M and Samardžić, Nataša M and Randjelović, Danijela V",
year = "2013",
abstract = "This brief presents the transport parameters of silver layers on a polyimide substrate fabricated by an inkjet printing technology using nanoparticle inks with 20 wt% and 40 wt% silver. All the electrical characteristics of the samples were measured by Hall effect measurement system at 0.37 T. The electron mobility in inkjet printed silver layer was 7.07 and 4.58 cm(2)/V s for 20 wt% silver, 29.6 and 21.3 cm(2)/V s for 40 wt% silver at 77 and 300 K, respectively. The resistivity in inkjet printed silver layer with 20 wt% is 20.6 x 10(-6) and 27.1 x 10(-6) Omega cm, and 4.81 x 10(-6) and 8.27 x 10(-6) Omega cm for 40 wt% silver at 77 and 300 K, respectively. The surface morphology and profiles of the samples were obtained with an atomic force and scanning electron microscope.",
publisher = "IEEE-Inst Electrical Electronics Engineers Inc, Piscataway",
journal = "IEEE Transactions on Electron Devices",
title = "Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures",
pages = "2967-2963",
number = "9",
volume = "60",
doi = "10.1109/TED.2013.2274661"
}

Menicanin, A., Živanov, L. D., Stojanović, G. M., Samardžić, N. M.,& Randjelović, D. V.. (2013). Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures. in IEEE Transactions on Electron Devices
IEEE-Inst Electrical Electronics Engineers Inc, Piscataway., 60(9), 2963-2967.
https://doi.org/10.1109/TED.2013.2274661

Menicanin A, Živanov LD, Stojanović GM, Samardžić NM, Randjelović DV. Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures. in IEEE Transactions on Electron Devices. 2013;60(9):2963-2967.
doi:10.1109/TED.2013.2274661 .

Menicanin, Aleksandar, Živanov, Ljiljana D, Stojanović, Goran M, Samardžić, Nataša M, Randjelović, Danijela V, "Transport Parameters of Inkjet Printed Nanoparticle Silver on Polyimide Substrate Measured at Room and Liquid Nitrogen Temperatures" in IEEE Transactions on Electron Devices, 60, no. 9 (2013):2963-2967,
https://doi.org/10.1109/TED.2013.2274661 . .