TY  - CONF
AU  - Vijatović Petrović, Mirjana
AU  - Džunuzović, Adis
AU  - Bobić, Jelena
AU  - Curecheriu, Lavinia-Petronela
AU  - Koruza, Jurij
AU  - Stojanović, Biljana
PY  - 2013
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/3052
AB  - NiFe2O4 (NF) and Ni0.5Zn0.5Fe2O4 (NZF) powders as a part of multiferroic composites were prepared by auto-combustion method starting from nickel, zinc and iron nitrates. After the process of self-ignition, fine precursor powders were thermally treated at 1000 oC for 1h forming the nickel ferrite and nickel-zinc ferrite powders [1]. XRD analysis proved the formation of well crystallized cubic spinel structure in both ferrites. Particle size distribution measurements showed the existence of agglomerates. SEM micrographs showed the existence of polygonal grains ~ 100-500 nm. The results of powders characterization are presented in the table I.
Ceramics materials were obtained by sintering at 1250 oC for 4 h in the tube furnace. XRD analysis showed the formation of well crystalline spinel structure in both materials.    Magnetic measurements of ferrites were carried out and presented in Figure 1. Saturation magnetization moment of NF was lower than for NZF and the fields at which saturation occur was almost the same for both ceramics. The coercivity HC (Oe) was higher for the NZF indicating that it is “softer” than NF [2]. Permeability vs. frequency measurements showed that NZF possesses much higher permeability that NF. On the other hand, the NF permeability value keeps constant values in a broader frequency range than NZF ceramics.
PB  - 2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47
C3  - 2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47
T1  - Synthesis and Properties of NiFe2O4 and Ni0.5Zn0.5Fe2O4  Prepared by Auto-combustion Method
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_3052
ER  - 

@conference{
author = "Vijatović Petrović, Mirjana and Džunuzović, Adis and Bobić, Jelena and Curecheriu, Lavinia-Petronela and Koruza, Jurij and Stojanović, Biljana",
year = "2013",
abstract = "NiFe2O4 (NF) and Ni0.5Zn0.5Fe2O4 (NZF) powders as a part of multiferroic composites were prepared by auto-combustion method starting from nickel, zinc and iron nitrates. After the process of self-ignition, fine precursor powders were thermally treated at 1000 oC for 1h forming the nickel ferrite and nickel-zinc ferrite powders [1]. XRD analysis proved the formation of well crystallized cubic spinel structure in both ferrites. Particle size distribution measurements showed the existence of agglomerates. SEM micrographs showed the existence of polygonal grains ~ 100-500 nm. The results of powders characterization are presented in the table I.
Ceramics materials were obtained by sintering at 1250 oC for 4 h in the tube furnace. XRD analysis showed the formation of well crystalline spinel structure in both materials.    Magnetic measurements of ferrites were carried out and presented in Figure 1. Saturation magnetization moment of NF was lower than for NZF and the fields at which saturation occur was almost the same for both ceramics. The coercivity HC (Oe) was higher for the NZF indicating that it is “softer” than NF [2]. Permeability vs. frequency measurements showed that NZF possesses much higher permeability that NF. On the other hand, the NF permeability value keeps constant values in a broader frequency range than NZF ceramics.",
publisher = "2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47",
journal = "2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47",
title = "Synthesis and Properties of NiFe2O4 and Ni0.5Zn0.5Fe2O4  Prepared by Auto-combustion Method",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_3052"
}

Vijatović Petrović, M., Džunuzović, A., Bobić, J., Curecheriu, L., Koruza, J.,& Stojanović, B.. (2013). Synthesis and Properties of NiFe2O4 and Ni0.5Zn0.5Fe2O4  Prepared by Auto-combustion Method. in 2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47
2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47..
https://hdl.handle.net/21.15107/rcub_rimsi_3052

Vijatović Petrović M, Džunuzović A, Bobić J, Curecheriu L, Koruza J, Stojanović B. Synthesis and Properties of NiFe2O4 and Ni0.5Zn0.5Fe2O4  Prepared by Auto-combustion Method. in 2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47. 2013;.
https://hdl.handle.net/21.15107/rcub_rimsi_3052 .

Vijatović Petrović, Mirjana, Džunuzović, Adis, Bobić, Jelena, Curecheriu, Lavinia-Petronela, Koruza, Jurij, Stojanović, Biljana, "Synthesis and Properties of NiFe2O4 and Ni0.5Zn0.5Fe2O4  Prepared by Auto-combustion Method" in 2ndCOST MP0904 Workshop, Single and Multiphase Ferroics and Multiferroics with restricted Geometries, 22-23. April 2013., Faenca, Italy, Book of abstracts, p. 47 (2013),
https://hdl.handle.net/21.15107/rcub_rimsi_3052 .