Претраживање
Приказ резултата 31-40 од 42
Multiferroic (NiZn) Fe2O4-BaTiO3 composites prepared from nanopowders by auto-combustion method
(Elsevier Sci Ltd, Oxford, 2015)
Nickel zinc ferrite (NZF) and barium titanate (BT) were prepared by auto-combustion synthesis as an effective, simple and rapid method. Multiferroic composites with the general formula yNi(1-x)Zn(x)Fe(2)O(4)-(1-y)BT (x=0.3, ...
Structural and electrical properties of sintered Fe2O3/TiO2 nanopowder mixtures
(Elsevier Sci Ltd, Oxford, 2014)
Starting nanopowders of TiO2 (anatase 99.7%) and alpha-Fe2O3 (hematite) were mixed in the weight ratios 60:40 and 40:60. Green samples were sintered in the temperature range 750-1250 degrees C in air. Structural, morphological ...
Properties of lanthanum doped BaTiO3 produced from nanopowders
(Elsevier Sci Ltd, Oxford, 2010)
Pure and barium titanate (BT) powders doped with different lanthanum concentration were prepared by the polymeric precursor method (Pechini process) which was carried out as a three-stage process from organometallic ...
Far infrared and micro structural studies of mechanically activated nickel manganite
(Elsevier Sci Ltd, Oxford, 2013)
Nickel manganite powder synthesized by calcination of a stoichiometric mixture of manganese (MnO Aldrich 99.9%) and nickel oxide (NiO Merck, 99.5%) containing 0.5 wt% CoO and Fe2O3, was additionally mechanically activated ...
Effect of La substitution on the structural and electrical properties of BaBi4-xLaxTi4O15
(Elsevier Sci Ltd, Oxford, 2013)
Pure and lanthanum doped barium bismuth titanate BaBi4-xLaxTi4O15 (BBLT, x=0, 0.05, 0.15, 0.30) ceramics were prepared utilizing solid state method. The X-ray diffraction (XRD) data confirmed formation of single-phase ...
Synthesis and characterization of tungsten carbide fine powders
(Elsevier Sci Ltd, Oxford, 2015)
Fine tungsten carbide (WC) powder was prepared by solid state reaction between tungsten powder (W) and activated carbon cloth as a new carbon (C) source. The effect of temperature and time of heat treatment as well as the ...
Structure and properties of chemically synthesized BiFeO3. Influence of fuel and complexing agent
(Elsevier Sci Ltd, Oxford, 2015)
Perovskite, single multiferroic bismuth ferrite was prepared by two chemical methods: auto-combustion and soft chemical route. Influence of different fuels and complexing agents and thermal treatment on purity of bismuth ...
Transformation of Cs-exchanged clinoptilolite to CsAlSi5O12 by hot-pressing
(Elsevier Sci Ltd, Oxford, 2017)
Dense CsAlSi5O12 was successfully obtained by hot pressing of Cs-exchanged clinoptilolite at 900 degrees C. Simultaneous application of high temperature and mechanical pressure allowed formation of CsAlSi5O12 at temperature ...
Magneto-electric properties of xNi(0.7)Zn(0.3)Fe(2)O(4) - (1-x)BaTiO3 multiferroic composites
(Elsevier Sci Ltd, Oxford, 2018)
Di-phase ceramic composites, with general formula xNi(0.7)Zn(0.3)Fe(2)O(4) - (1-x)BaTiO3(x = 0.9, 0.7, 0.5, 0.3, 0.1), were prepared by a mixing method. X-ray analysis, for powder and ceramics, indicated the formation of ...
PZT-nickel ferrite and PZT-cobalt ferrite comparative study: Structural, dielectric, ferroelectric and magnetic properties of composite ceramics
(Elsevier Sci Ltd, Oxford, 2018)
Comparative study of different PZT-based composite materials ((x)PbZr0.52Ti0.48O3 + (1-x)CoFe2O4 and (x) PbZr0.52Ti0.48O3 + (1-x)Ni0.7Zn0.3Fe2O4 (x = 0.8 and 0.9)) is presented in the frame of structural, dielectric, ...