The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics
Нема приказа
Аутори
Pavlović, V. P.Nikolić, Maria Vesna
Spasojević, Vojislav
Blanusa, J.
Živković, Lj.
Stojanović, Biljana D
Pavlović, Vladimir B
Ristic, M. M.
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.
Кључне речи:
tribophysical activation / sintering / BaTiO3Извор:
Advanced Materials Forum Iii, Pts 1 and 2, 2006, 514-516, 1566-1570Издавач:
- Trans Tech Publications Ltd, Durnten-Zurich
DOI: 10.4028/www.scientific.net/MSF.514-516.1566
ISSN: 0255-5476
WoS: 000238056400310
[ Google Scholar ]Институција/група
Institut za multidisciplinarna istraživanjaTY - JOUR AU - Pavlović, V. P. AU - Nikolić, Maria Vesna AU - Spasojević, Vojislav AU - Blanusa, J. AU - Živković, Lj. AU - Stojanović, Biljana D AU - Pavlović, Vladimir B AU - Ristic, M. M. PY - 2006 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/163 AB - In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis. PB - Trans Tech Publications Ltd, Durnten-Zurich T2 - Advanced Materials Forum Iii, Pts 1 and 2 T1 - The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics EP - 1570 SP - 1566 VL - 514-516 DO - 10.4028/www.scientific.net/MSF.514-516.1566 ER -
@article{ author = "Pavlović, V. P. and Nikolić, Maria Vesna and Spasojević, Vojislav and Blanusa, J. and Živković, Lj. and Stojanović, Biljana D and Pavlović, Vladimir B and Ristic, M. M.", year = "2006", abstract = "In this paper the influence of tribophysical activation on non-isothermal sintering of barium titanate has been investigated. BaTiO3 Powders were tribophysically activated in a planetary ball mill for 0, 60 and 120 min., pressed and non-isothermally sintered up to 1380 degrees C. Dilatometric analysis was performed in air in the temperature range from room temperature to 1380 degrees C with heating rates of 10, 20 and 30 degrees C/min. The samples were analyzed by the X-ray powder diffraction method. Investigation of the morphology of microstructure constituents was performed using the scanning electron microsocopy method. With the purpose of optimizing technological parameters the results obtained by microstructure analysis were correlated with the results of quantitative dilatometric analysis.", publisher = "Trans Tech Publications Ltd, Durnten-Zurich", journal = "Advanced Materials Forum Iii, Pts 1 and 2", title = "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics", pages = "1570-1566", volume = "514-516", doi = "10.4028/www.scientific.net/MSF.514-516.1566" }
Pavlović, V. P., Nikolić, M. V., Spasojević, V., Blanusa, J., Živković, Lj., Stojanović, B. D., Pavlović, V. B.,& Ristic, M. M.. (2006). The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Advanced Materials Forum Iii, Pts 1 and 2 Trans Tech Publications Ltd, Durnten-Zurich., 514-516, 1566-1570. https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566
Pavlović VP, Nikolić MV, Spasojević V, Blanusa J, Živković L, Stojanović BD, Pavlović VB, Ristic MM. The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics. in Advanced Materials Forum Iii, Pts 1 and 2. 2006;514-516:1566-1570. doi:10.4028/www.scientific.net/MSF.514-516.1566 .
Pavlović, V. P., Nikolić, Maria Vesna, Spasojević, Vojislav, Blanusa, J., Živković, Lj., Stojanović, Biljana D, Pavlović, Vladimir B, Ristic, M. M., "The influence of tribophysical activation on non-isothermal sintering of BaTiO3 ceramics" in Advanced Materials Forum Iii, Pts 1 and 2, 514-516 (2006):1566-1570, https://doi.org/10.4028/www.scientific.net/MSF.514-516.1566 . .