Influence of spinel phase composition on ZnO varistors properties
Апстракт
The method of directed synthesis of the constituent phases (DSCP) was applied to investigate the influence of spinel phase composition on characteristics of ZnO varistors. Six varistor mixtures differing only in chemical composition of the spinel phase were prepared. The phase ratio as well as the compositions of ZnO and intergranular gamma-Bi2O3 phases were the same in all samples. Characterization of prepared varistors was performed by X-ray diffraction, SEM and electrical measurements. It was shown that it is possible, in certain cases, to estimate additive redistribution taking into account changes in lattice constants of ZnO, spinel phases and varistor composition. Comparison of six different raristor mixtures shows that it is possible to reduce the number of components of the system if all main constituents of the varistor microstructure are still present. Results confirmed advantages of the DSCP method in preparation of varistors of required phase composition and properties.
Кључне речи:
varistors / spinel / lattice constants / electrical properties / compositionИзвор:
Advanced Materials and Processes: Yucomat Ii, 1998, 282-2, 225-232Издавач:
- Trans Tech Publications Ltd, Durnten-Zurich
DOI: 10.4028/www.scientific.net/MSF.282-283.225
ISSN: 0255-5476
WoS: 000075079900032
Scopus: 2-s2.0-0031620589
Институција/група
Institut za multidisciplinarna istraživanjaTY - JOUR AU - Branković, Zorica AU - Poleti, Dejan AU - Karanović, Ljiljana C. AU - Uskoković, D PY - 1998 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/44 AB - The method of directed synthesis of the constituent phases (DSCP) was applied to investigate the influence of spinel phase composition on characteristics of ZnO varistors. Six varistor mixtures differing only in chemical composition of the spinel phase were prepared. The phase ratio as well as the compositions of ZnO and intergranular gamma-Bi2O3 phases were the same in all samples. Characterization of prepared varistors was performed by X-ray diffraction, SEM and electrical measurements. It was shown that it is possible, in certain cases, to estimate additive redistribution taking into account changes in lattice constants of ZnO, spinel phases and varistor composition. Comparison of six different raristor mixtures shows that it is possible to reduce the number of components of the system if all main constituents of the varistor microstructure are still present. Results confirmed advantages of the DSCP method in preparation of varistors of required phase composition and properties. PB - Trans Tech Publications Ltd, Durnten-Zurich T2 - Advanced Materials and Processes: Yucomat Ii T1 - Influence of spinel phase composition on ZnO varistors properties EP - 232 SP - 225 VL - 282-2 DO - 10.4028/www.scientific.net/MSF.282-283.225 ER -
@article{ author = "Branković, Zorica and Poleti, Dejan and Karanović, Ljiljana C. and Uskoković, D", year = "1998", abstract = "The method of directed synthesis of the constituent phases (DSCP) was applied to investigate the influence of spinel phase composition on characteristics of ZnO varistors. Six varistor mixtures differing only in chemical composition of the spinel phase were prepared. The phase ratio as well as the compositions of ZnO and intergranular gamma-Bi2O3 phases were the same in all samples. Characterization of prepared varistors was performed by X-ray diffraction, SEM and electrical measurements. It was shown that it is possible, in certain cases, to estimate additive redistribution taking into account changes in lattice constants of ZnO, spinel phases and varistor composition. Comparison of six different raristor mixtures shows that it is possible to reduce the number of components of the system if all main constituents of the varistor microstructure are still present. Results confirmed advantages of the DSCP method in preparation of varistors of required phase composition and properties.", publisher = "Trans Tech Publications Ltd, Durnten-Zurich", journal = "Advanced Materials and Processes: Yucomat Ii", title = "Influence of spinel phase composition on ZnO varistors properties", pages = "232-225", volume = "282-2", doi = "10.4028/www.scientific.net/MSF.282-283.225" }
Branković, Z., Poleti, D., Karanović, L. C.,& Uskoković, D.. (1998). Influence of spinel phase composition on ZnO varistors properties. in Advanced Materials and Processes: Yucomat Ii Trans Tech Publications Ltd, Durnten-Zurich., 282-2, 225-232. https://doi.org/10.4028/www.scientific.net/MSF.282-283.225
Branković Z, Poleti D, Karanović LC, Uskoković D. Influence of spinel phase composition on ZnO varistors properties. in Advanced Materials and Processes: Yucomat Ii. 1998;282-2:225-232. doi:10.4028/www.scientific.net/MSF.282-283.225 .
Branković, Zorica, Poleti, Dejan, Karanović, Ljiljana C., Uskoković, D, "Influence of spinel phase composition on ZnO varistors properties" in Advanced Materials and Processes: Yucomat Ii, 282-2 (1998):225-232, https://doi.org/10.4028/www.scientific.net/MSF.282-283.225 . .