INFLUECE OF PROCESSING METHOD ON DIELECTRIC PROPERTIES OF BaBi4Ti4O15 CERAMICS
Апстракт
Family of bismuth oxides was discovered more than 50 years ago by Aurivillius. Recently, there has been renewed interest in the properties of the Aurivillius phases as temperature-stable ferro-piezoelectrics. Several bismuth-layered crystal structures and their properties have been investigated in detail. However, a lot of aspects of the preparation and properties of barium bismuth titanate, BaBi4Ti4O15 [BBiT] remain unexplored, whereas being promising candidate for high-temperature piezoelectric applications, memory application and ferroelectric nonvolatile memories (Fe-RAM). In present work, BBiT was prepared by solid state reaction from mixture of oxides: BaO, TiO2 and Bi2O3 which was previously milled for 6 h (MA). The mixture was heated at 750 oC for 4 h. As a comparison, the same ceramics were prepared throught conventional solid state reaction (CSS). The same oxides mixture was homogenized for 24 h in isopropanol as a liquid medium and calcinated at 950 oC for 4 h which is 200 o...C higher temperature than for MA procedure. Sintering process was carried out at 1130 oC for 1 h in both synthesis methods. Smaller plate like grains are noticed in BBiT ceramics prepared from powders obtained by MA process comparing to CSS process. In the temperature dependence of the dielectric permittivity, the maximum associated to the Curie temperature was higher and narrower in ceramics prepared by CSS method. Influence of the grain and grain boundaries contribution to the dielectric behaviour in both ceramics were analyzed through impedance spectroscopy.
Кључне речи:
Aurivillius phases / piezoelectric applications / memory application / dielectric permittivity / Curie temperatureИзвор:
VII International Conference on Mechanochemistry and Mechanical Alloying INCOME, 31 August-3 September, 2011, Herceg Novi, Montenegro, Programme and the book of abstracts, p 81, 2011Издавач:
- Materials Research Society of Serbia, Crna Gora
Институција/група
Institut za multidisciplinarna istraživanjaTY - CONF AU - Bobić, Jelena AU - Vijatović Petrović, Mirjana AU - Greičius, Simonas AU - Banys, Juras AU - Stojanović, Biljana PY - 2011 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/2854 AB - Family of bismuth oxides was discovered more than 50 years ago by Aurivillius. Recently, there has been renewed interest in the properties of the Aurivillius phases as temperature-stable ferro-piezoelectrics. Several bismuth-layered crystal structures and their properties have been investigated in detail. However, a lot of aspects of the preparation and properties of barium bismuth titanate, BaBi4Ti4O15 [BBiT] remain unexplored, whereas being promising candidate for high-temperature piezoelectric applications, memory application and ferroelectric nonvolatile memories (Fe-RAM). In present work, BBiT was prepared by solid state reaction from mixture of oxides: BaO, TiO2 and Bi2O3 which was previously milled for 6 h (MA). The mixture was heated at 750 oC for 4 h. As a comparison, the same ceramics were prepared throught conventional solid state reaction (CSS). The same oxides mixture was homogenized for 24 h in isopropanol as a liquid medium and calcinated at 950 oC for 4 h which is 200 oC higher temperature than for MA procedure. Sintering process was carried out at 1130 oC for 1 h in both synthesis methods. Smaller plate like grains are noticed in BBiT ceramics prepared from powders obtained by MA process comparing to CSS process. In the temperature dependence of the dielectric permittivity, the maximum associated to the Curie temperature was higher and narrower in ceramics prepared by CSS method. Influence of the grain and grain boundaries contribution to the dielectric behaviour in both ceramics were analyzed through impedance spectroscopy. PB - Materials Research Society of Serbia, Crna Gora C3 - VII International Conference on Mechanochemistry and Mechanical Alloying INCOME, 31 August-3 September, 2011, Herceg Novi, Montenegro, Programme and the book of abstracts, p 81 T1 - INFLUECE OF PROCESSING METHOD ON DIELECTRIC PROPERTIES OF BaBi4Ti4O15 CERAMICS UR - https://hdl.handle.net/21.15107/rcub_rimsi_2854 ER -
@conference{ author = "Bobić, Jelena and Vijatović Petrović, Mirjana and Greičius, Simonas and Banys, Juras and Stojanović, Biljana", year = "2011", abstract = "Family of bismuth oxides was discovered more than 50 years ago by Aurivillius. Recently, there has been renewed interest in the properties of the Aurivillius phases as temperature-stable ferro-piezoelectrics. Several bismuth-layered crystal structures and their properties have been investigated in detail. However, a lot of aspects of the preparation and properties of barium bismuth titanate, BaBi4Ti4O15 [BBiT] remain unexplored, whereas being promising candidate for high-temperature piezoelectric applications, memory application and ferroelectric nonvolatile memories (Fe-RAM). In present work, BBiT was prepared by solid state reaction from mixture of oxides: BaO, TiO2 and Bi2O3 which was previously milled for 6 h (MA). The mixture was heated at 750 oC for 4 h. As a comparison, the same ceramics were prepared throught conventional solid state reaction (CSS). The same oxides mixture was homogenized for 24 h in isopropanol as a liquid medium and calcinated at 950 oC for 4 h which is 200 oC higher temperature than for MA procedure. Sintering process was carried out at 1130 oC for 1 h in both synthesis methods. Smaller plate like grains are noticed in BBiT ceramics prepared from powders obtained by MA process comparing to CSS process. In the temperature dependence of the dielectric permittivity, the maximum associated to the Curie temperature was higher and narrower in ceramics prepared by CSS method. Influence of the grain and grain boundaries contribution to the dielectric behaviour in both ceramics were analyzed through impedance spectroscopy.", publisher = "Materials Research Society of Serbia, Crna Gora", journal = "VII International Conference on Mechanochemistry and Mechanical Alloying INCOME, 31 August-3 September, 2011, Herceg Novi, Montenegro, Programme and the book of abstracts, p 81", title = "INFLUECE OF PROCESSING METHOD ON DIELECTRIC PROPERTIES OF BaBi4Ti4O15 CERAMICS", url = "https://hdl.handle.net/21.15107/rcub_rimsi_2854" }
Bobić, J., Vijatović Petrović, M., Greičius, S., Banys, J.,& Stojanović, B.. (2011). INFLUECE OF PROCESSING METHOD ON DIELECTRIC PROPERTIES OF BaBi4Ti4O15 CERAMICS. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME, 31 August-3 September, 2011, Herceg Novi, Montenegro, Programme and the book of abstracts, p 81 Materials Research Society of Serbia, Crna Gora.. https://hdl.handle.net/21.15107/rcub_rimsi_2854
Bobić J, Vijatović Petrović M, Greičius S, Banys J, Stojanović B. INFLUECE OF PROCESSING METHOD ON DIELECTRIC PROPERTIES OF BaBi4Ti4O15 CERAMICS. in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME, 31 August-3 September, 2011, Herceg Novi, Montenegro, Programme and the book of abstracts, p 81. 2011;. https://hdl.handle.net/21.15107/rcub_rimsi_2854 .
Bobić, Jelena, Vijatović Petrović, Mirjana, Greičius, Simonas, Banys, Juras, Stojanović, Biljana, "INFLUECE OF PROCESSING METHOD ON DIELECTRIC PROPERTIES OF BaBi4Ti4O15 CERAMICS" in VII International Conference on Mechanochemistry and Mechanical Alloying INCOME, 31 August-3 September, 2011, Herceg Novi, Montenegro, Programme and the book of abstracts, p 81 (2011), https://hdl.handle.net/21.15107/rcub_rimsi_2854 .