Influence of Processing Method on Dielectric Properties of BaBi4Ti4O15 Ceramics
Аутори
Bobić, JelenaVijatović Petrović, Mirjana
Ilić, Nikola
Džunuzović, Adis
Grigalaitis, Robertas
Banys, Juras
Stojanović, Biljana
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Bismuth layer-structured ferroelectrics (BLSF), first described by Aurivillius, have attracted much
attention for their application in non-volatile random access memory and high temperature piezoelectric
devices. BaBi4Ti4O15 (BBT) is a well-known member of BLSFs. Considering the grain size affect reduction
of conductivity of most of BLSF compounds [1] this paper dealing with effect of mechanochemical
assisted synthesis method on electrical, dielectric and conductive propefties of BBTcompounds.
BBT was prepared by solid state reaction from mixture of oxides: BaO, Ti02 and BizO: which was
previously milled for 6 h (BBT-MA). The mixture was heated at 850 oCfor 4 h. As a comparison, the same
ceramics were prepared throught conventional solid state reaction (BBT-SS). The same oxides mixture
was homogenized for 24 h in isopropanol and calcinated at 950 oC for 4 h which is 100 oC higher
temperature than for MA procedure. Sintering process was carried out at 1130 oC for t h in both
s...ynthesis methods. Smaller plate like grains are noticed in BBT ceramics prepared from powders obtained
by MA process comparing to SS process (Fig 1.). In the temperature dependence of the dielectric
permittivity, the maximum associated to the Curie temperature was higher and narrower in ceramics
prepared by SS method. Influence of the grain and grain boundaries contribution to the dielectric
behaviour in both ceramics were analyzed through impedance spectroscopy.
Кључне речи:
Bismuth layer-structured ferroelectrics / Aurivillius / solid state reaction / grain and grain boundaries contribution / Curie temperatureИзвор:
COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014, 2014Издавач:
- COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014
Финансирање / пројекти:
- Синтеза нанопрахова и процесирање керамике и нанокомпозита са специфичним електричним и магнетним својствима за примену у интегрисаним пасивним компонентама (RS-MESTD-Integrated and Interdisciplinary Research (IIR or III)-45021)
- COST MP 0904
Институција/група
Institut za multidisciplinarna istraživanjaTY - CONF AU - Bobić, Jelena AU - Vijatović Petrović, Mirjana AU - Ilić, Nikola AU - Džunuzović, Adis AU - Grigalaitis, Robertas AU - Banys, Juras AU - Stojanović, Biljana PY - 2014 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/2712 AB - Bismuth layer-structured ferroelectrics (BLSF), first described by Aurivillius, have attracted much attention for their application in non-volatile random access memory and high temperature piezoelectric devices. BaBi4Ti4O15 (BBT) is a well-known member of BLSFs. Considering the grain size affect reduction of conductivity of most of BLSF compounds [1] this paper dealing with effect of mechanochemical assisted synthesis method on electrical, dielectric and conductive propefties of BBTcompounds. BBT was prepared by solid state reaction from mixture of oxides: BaO, Ti02 and BizO: which was previously milled for 6 h (BBT-MA). The mixture was heated at 850 oCfor 4 h. As a comparison, the same ceramics were prepared throught conventional solid state reaction (BBT-SS). The same oxides mixture was homogenized for 24 h in isopropanol and calcinated at 950 oC for 4 h which is 100 oC higher temperature than for MA procedure. Sintering process was carried out at 1130 oC for t h in both synthesis methods. Smaller plate like grains are noticed in BBT ceramics prepared from powders obtained by MA process comparing to SS process (Fig 1.). In the temperature dependence of the dielectric permittivity, the maximum associated to the Curie temperature was higher and narrower in ceramics prepared by SS method. Influence of the grain and grain boundaries contribution to the dielectric behaviour in both ceramics were analyzed through impedance spectroscopy. PB - COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014 C3 - COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014 T1 - Influence of Processing Method on Dielectric Properties of BaBi4Ti4O15 Ceramics UR - https://hdl.handle.net/21.15107/rcub_rimsi_2712 ER -
@conference{ author = "Bobić, Jelena and Vijatović Petrović, Mirjana and Ilić, Nikola and Džunuzović, Adis and Grigalaitis, Robertas and Banys, Juras and Stojanović, Biljana", year = "2014", abstract = "Bismuth layer-structured ferroelectrics (BLSF), first described by Aurivillius, have attracted much attention for their application in non-volatile random access memory and high temperature piezoelectric devices. BaBi4Ti4O15 (BBT) is a well-known member of BLSFs. Considering the grain size affect reduction of conductivity of most of BLSF compounds [1] this paper dealing with effect of mechanochemical assisted synthesis method on electrical, dielectric and conductive propefties of BBTcompounds. BBT was prepared by solid state reaction from mixture of oxides: BaO, Ti02 and BizO: which was previously milled for 6 h (BBT-MA). The mixture was heated at 850 oCfor 4 h. As a comparison, the same ceramics were prepared throught conventional solid state reaction (BBT-SS). The same oxides mixture was homogenized for 24 h in isopropanol and calcinated at 950 oC for 4 h which is 100 oC higher temperature than for MA procedure. Sintering process was carried out at 1130 oC for t h in both synthesis methods. Smaller plate like grains are noticed in BBT ceramics prepared from powders obtained by MA process comparing to SS process (Fig 1.). In the temperature dependence of the dielectric permittivity, the maximum associated to the Curie temperature was higher and narrower in ceramics prepared by SS method. Influence of the grain and grain boundaries contribution to the dielectric behaviour in both ceramics were analyzed through impedance spectroscopy.", publisher = "COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014", journal = "COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014", title = "Influence of Processing Method on Dielectric Properties of BaBi4Ti4O15 Ceramics", url = "https://hdl.handle.net/21.15107/rcub_rimsi_2712" }
Bobić, J., Vijatović Petrović, M., Ilić, N., Džunuzović, A., Grigalaitis, R., Banys, J.,& Stojanović, B.. (2014). Influence of Processing Method on Dielectric Properties of BaBi4Ti4O15 Ceramics. in COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014 COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014.. https://hdl.handle.net/21.15107/rcub_rimsi_2712
Bobić J, Vijatović Petrović M, Ilić N, Džunuzović A, Grigalaitis R, Banys J, Stojanović B. Influence of Processing Method on Dielectric Properties of BaBi4Ti4O15 Ceramics. in COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014. 2014;. https://hdl.handle.net/21.15107/rcub_rimsi_2712 .
Bobić, Jelena, Vijatović Petrović, Mirjana, Ilić, Nikola, Džunuzović, Adis, Grigalaitis, Robertas, Banys, Juras, Stojanović, Biljana, "Influence of Processing Method on Dielectric Properties of BaBi4Ti4O15 Ceramics" in COST MPO9O4: Single- and multiphase ferroics and multiferroies with restricted geometries (SIMUFER) Closing Conference and Final Management Committee Meeting, CNR-lENl: Institute for Energetics and lnterphases, Genoa, ltaly 30th January -'1st February, 2014 (2014), https://hdl.handle.net/21.15107/rcub_rimsi_2712 .