Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars
Само за регистроване кориснике
2020
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural strength and was less brittle than the second one with fly ash + slag. The addition of hemp fibres slightly changed the mortars' density, water absorption, compressive and flexural strength, however significantly increased its energy absorption capacity. The initially more brittle matrix exhibited significantly higher relative toughness increase. The smoother and less porous fibre/matrix interface assured through numerous fibre/matrix contact points a more optimal fibre/matrix interfacial bond- and frictional stress transfer.
Кључне речи:
Three-point bending test / Slag / Physical properties / Natural fibre / Mortar / Mechanical properties / Hemp / Fly ash / Energy absorption capacity / Alkali-activated materialИзвор:
Construction and Building Materials, 2020, 259Издавач:
- Elsevier Sci Ltd, Oxford
Финансирање / пројекти:
- Federal Ministry of Science, Research and Economy (BMWFW) in Austria
- Ministry of Education, Youth and Sports of the Czech RepublicMinistry of Education, Youth & Sports - Czech Republic
- Геополимери - Развој технологије за конверзију индустријског отпада у функционалне материјале (RS-MESTD-Technological Development (TD or TR)-34026)
- Истраживање могућности примене отпадних и рециклираних материјала у бетонским композитима, са оценом утицаја на животну средину, у циљу промоције одрживог грађевинарства у србији (RS-MESTD-Technological Development (TD or TR)-36017)
- MULT_DR 08/2017
DOI: 10.1016/j.conbuildmat.2020.119677
ISSN: 0950-0618
WoS: 000573927400003
Scopus: 2-s2.0-85086584814
Институција/група
Institut za multidisciplinarna istraživanjaTY - JOUR AU - Poletanović, Bojan AU - Dragas, Jelena AU - Ignjatović, Ivan AU - Komljenović, Miroslav M AU - Merta, Ildiko PY - 2020 UR - http://rimsi.imsi.bg.ac.rs/handle/123456789/1323 AB - Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural strength and was less brittle than the second one with fly ash + slag. The addition of hemp fibres slightly changed the mortars' density, water absorption, compressive and flexural strength, however significantly increased its energy absorption capacity. The initially more brittle matrix exhibited significantly higher relative toughness increase. The smoother and less porous fibre/matrix interface assured through numerous fibre/matrix contact points a more optimal fibre/matrix interfacial bond- and frictional stress transfer. PB - Elsevier Sci Ltd, Oxford T2 - Construction and Building Materials T1 - Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars VL - 259 DO - 10.1016/j.conbuildmat.2020.119677 ER -
@article{ author = "Poletanović, Bojan and Dragas, Jelena and Ignjatović, Ivan and Komljenović, Miroslav M and Merta, Ildiko", year = "2020", abstract = "Two alkali-activated mortars with different solid prime materials were analysed. The first mortar contained fly ash, had lower density, higher water absorption, lower compactness, lower compressive strength, similar flexural strength and was less brittle than the second one with fly ash + slag. The addition of hemp fibres slightly changed the mortars' density, water absorption, compressive and flexural strength, however significantly increased its energy absorption capacity. The initially more brittle matrix exhibited significantly higher relative toughness increase. The smoother and less porous fibre/matrix interface assured through numerous fibre/matrix contact points a more optimal fibre/matrix interfacial bond- and frictional stress transfer.", publisher = "Elsevier Sci Ltd, Oxford", journal = "Construction and Building Materials", title = "Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars", volume = "259", doi = "10.1016/j.conbuildmat.2020.119677" }
Poletanović, B., Dragas, J., Ignjatović, I., Komljenović, M. M.,& Merta, I.. (2020). Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars. in Construction and Building Materials Elsevier Sci Ltd, Oxford., 259. https://doi.org/10.1016/j.conbuildmat.2020.119677
Poletanović B, Dragas J, Ignjatović I, Komljenović MM, Merta I. Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars. in Construction and Building Materials. 2020;259. doi:10.1016/j.conbuildmat.2020.119677 .
Poletanović, Bojan, Dragas, Jelena, Ignjatović, Ivan, Komljenović, Miroslav M, Merta, Ildiko, "Physical and mechanical properties of hemp fibre reinforced alkali-activated fly ash and fly ash/slag mortars" in Construction and Building Materials, 259 (2020), https://doi.org/10.1016/j.conbuildmat.2020.119677 . .