Претраживање
Приказ резултата 1-10 од 17
Sintering and electrical properties of Ce1-xBixO2-delta solid solution
(Elsevier Science Sa, Lausanne, 2014)
Solid solution Ce1-xBixO2-delta nanopowders with the composition of x = 0.1-0.5 were synthesized by using Self Propagating Room Temperature procedure (SPRT). The results obtained by XRPD show that synthesized samples were ...
Influence of the indium concentration on microstructural and electrical properties of proton conducting NiO-BaCe0.9-xInxY0.1O3-delta cermet anodes for IT-SOFC application
(Elsevier Science Sa, Lausanne, 2013)
Optimization of the major properties of anodes based on proton conductors, such as microstructure, conductivity and chemical stability, is yet to be achieved. In this study we investigated the influence of indium on the ...
Mechanochemically assisted solid-state and citric acid complex syntheses of Cu-doped sodium cobaltite ceramics
(Elsevier Science Sa, Lausanne, 2015)
In the last decade, the sodium cobaltite ceramic became a promising candidate for potential thermoelectric applications, because of its large thermopower and low resistivity. In this work, polycrystalline samples of ...
Comparative study of structural and electrical properties of Pr and Ce doped BiFeO3 ceramics synthesized by auto-combustion method
(Elsevier Science Sa, Lausanne, 2016)
Polycrystalline Bi1-xPr(Ce)(x)FeO3 ceramics (x = 0, 0.03, 0.05 and 0.10) were prepared by auto-combustion method using urea as a fuel. The influence of Pr(Ce) doping on structural, vibrational, morphological, dielectric ...
Influence of the ratio between Ni and BaCe0 9Y0 1O3-delta on microstructural and electrical properties of proton conducting Ni-BaCe0 Y-9(0) O-1(3-delta) anodes
(Elsevier Science Sa, Lausanne, 2011)
Cermet anode substrates Ni-BaCe0 9Y0 1O3-delta (Ni-BCY10) with varied ratios between Ni and BCY10 were prepared BCY10 powders were prepared by the citrate-nitrate auto-combustion method and anode substrates were prepared ...
Structure study of nanosized La- and Sb-doped BaTiO3
(Elsevier Science Sa, Lausanne, 2010)
Lanthanum and antimony doped barium titanate powders were prepared by polymeric precursors method through Pechini process. Obtained powder was pressed into pellet and sintering was performed at 1300 degrees C for 8 h. The ...
Dielectric and relaxor behavior of BaBi4Ti4O15 ceramics
(Elsevier Science Sa, Lausanne, 2010)
Barium bismuth titanate BaBi4Ti4O15 (BBiT) ceramics have been prepared using non-conventional solid-state reaction route based on mechanochemical synthesis during intensive milling. The X-ray diffraction method was used ...
From titania to titanates: Phase and morphological transition in less alkaline medium under mild conditions
(Elsevier Science Sa, Lausanne, 2019)
In this work, nine products were prepared by modifying the experimental conditions (6, 12 and 18 hat 110, 135 and 160 degrees C) of hydrothermal treatment of starting nanoanatase in significantly less concentrated alkaline ...
Mechanochemical synthesis of yttrium manganite
(Elsevier Science Sa, Lausanne, 2013)
Yttrium manganite (YMnO3) is a multiferroic material, which means that it exhibits both ferromagnetic and ferroelectric properties, so making it interesting for a variety of technological applications. In this work, ...
Stability, characterization and functionality of proton conducting NiO-BaCe0.85-xNbxY0.15O3-delta cermet anodes for IT-SOFC application
(Elsevier Science Sa, Lausanne, 2014)
There are many of properties of anodes based on proton conductors, like microstructure, conductivity and chemical stability, which should be optimized. In this work we were dealing with the influence of niobium on the ...