TY  - CONF
AU  - Bertoncelj, Barbara
AU  - Vojisavljević, Katarina
AU  - Rihtaršič, Janez
AU  - Trefalt, Gregor
AU  - Malič, Barbara
PY  - 2016
UR  - http://rimsi.imsi.bg.ac.rs/handle/123456789/2903
AB  - In this study, the influence of the glass fiber (GF) content on the
microstructure and flexural strength of bulk molding compounds (BMCs) is
investigated. Three sets of BMCs with different weight fractions of GF
(5/10/12.5 wt%) were commercially prepared and compression molded into test
specimens. The microstructure of the composites was analysed by scanning
electron microscopy and further quantitatively characterized by Voronoi analysis
in order to define the degree of the fiber distribution homogeneity. The
experimental results were compared to the modelled microstructures. The results
revealed that the fiber distribution in the composite with 5 wt% of GF is
considered as the most homogeneous. Through the obtained microstructural
descriptors, the fiber weight content and their distribution were correlated to the
flexural strength of BMCs. The flexural strength was the highest for the
composite with 10 wt% of GF.
PB  - Mednarodna podiplomska šola Jožefa Stefana, Ljubljana
C3  - 8. ŠTUDENTSKA KONFERENCA MEDNARODNE PODIPLOMSKE ŠOLE JOŽEFA STEFANA
T1  - Microstructural analysis of Bulk Molding Compounds and correlation with the flexural strength
EP  - 12
IS  - 1
SP  - 3
VL  - 1
UR  - https://hdl.handle.net/21.15107/rcub_rimsi_2903
ER  - 

@conference{
author = "Bertoncelj, Barbara and Vojisavljević, Katarina and Rihtaršič, Janez and Trefalt, Gregor and Malič, Barbara",
year = "2016",
abstract = "In this study, the influence of the glass fiber (GF) content on the
microstructure and flexural strength of bulk molding compounds (BMCs) is
investigated. Three sets of BMCs with different weight fractions of GF
(5/10/12.5 wt%) were commercially prepared and compression molded into test
specimens. The microstructure of the composites was analysed by scanning
electron microscopy and further quantitatively characterized by Voronoi analysis
in order to define the degree of the fiber distribution homogeneity. The
experimental results were compared to the modelled microstructures. The results
revealed that the fiber distribution in the composite with 5 wt% of GF is
considered as the most homogeneous. Through the obtained microstructural
descriptors, the fiber weight content and their distribution were correlated to the
flexural strength of BMCs. The flexural strength was the highest for the
composite with 10 wt% of GF.",
publisher = "Mednarodna podiplomska šola Jožefa Stefana, Ljubljana",
journal = "8. ŠTUDENTSKA KONFERENCA MEDNARODNE PODIPLOMSKE ŠOLE JOŽEFA STEFANA",
title = "Microstructural analysis of Bulk Molding Compounds and correlation with the flexural strength",
pages = "12-3",
number = "1",
volume = "1",
url = "https://hdl.handle.net/21.15107/rcub_rimsi_2903"
}

Bertoncelj, B., Vojisavljević, K., Rihtaršič, J., Trefalt, G.,& Malič, B.. (2016). Microstructural analysis of Bulk Molding Compounds and correlation with the flexural strength. in 8. ŠTUDENTSKA KONFERENCA MEDNARODNE PODIPLOMSKE ŠOLE JOŽEFA STEFANA
Mednarodna podiplomska šola Jožefa Stefana, Ljubljana., 1(1), 3-12.
https://hdl.handle.net/21.15107/rcub_rimsi_2903

Bertoncelj B, Vojisavljević K, Rihtaršič J, Trefalt G, Malič B. Microstructural analysis of Bulk Molding Compounds and correlation with the flexural strength. in 8. ŠTUDENTSKA KONFERENCA MEDNARODNE PODIPLOMSKE ŠOLE JOŽEFA STEFANA. 2016;1(1):3-12.
https://hdl.handle.net/21.15107/rcub_rimsi_2903 .

Bertoncelj, Barbara, Vojisavljević, Katarina, Rihtaršič, Janez, Trefalt, Gregor, Malič, Barbara, "Microstructural analysis of Bulk Molding Compounds and correlation with the flexural strength" in 8. ŠTUDENTSKA KONFERENCA MEDNARODNE PODIPLOMSKE ŠOLE JOŽEFA STEFANA, 1, no. 1 (2016):3-12,
https://hdl.handle.net/21.15107/rcub_rimsi_2903 .